Jabra SP5050 - Bluetooth hands-free Speakerphone Manual - 5   How To…

5

Jabra SP5050 Speakerphone

3 .  your phone will find the Jabra SP5050 .

  your phone then asks if you want to pair with it . accept by   

  pressing ‘yes’ or ‘ok’ on the phone and confirm with the pass- 

  key or Pin = 0000 (4 zeros) . your phone will confirm when pair 

  ing is complete . 

4.  In case of unsuccessful pairing, repeat steps 1 to 3.

you can manually put your Jabra SP5050 into pairing mode, if   

you want to pair with a new phone:

 .  Make sure the Speakerphone is off .

2 .  Press and hold the answer/end button for approx 7 sec .    

  until the connection status indicator light starts blink  

  continuously .

3 .  Set your Bluetooth phone to discover your Speakerphone    

  like described above

 5   hoW To…

Answer a call

•  Tap the answer/end button

End a call

•  Tap the answer/end button 

Make a call

•  When you make a call from your mobile phone, the call will  

  (subject to phone settings) automatically transfer to your    

  Speakerphone . if your phone does not allow this feature, press  

  on the Jabra SP5050’s answer/end button to transfer the call to  

  the Speakerphone .

Reject a call*

•  Press the answer/end button when the phone rings to reject an

  incoming call . depending on your phone settings, the person  

  who called you will either be forwarded to your voice mail or  

  hear a busy signal .

Activate voice dialling*

•  Press the answer/end button . for best results, record the voice- 

  dialling tag through your Speakerphone . Please consult your  

  phone’s user manual for more information about using this  

  feature .

* Phone dependent