Jabra STONE User Manual - English
9
english
Jabra Stone
Jabra Stone StatusDisplay
tM
will turn off after 4 seconds of
non-activity to save battery . only when in pairing mode the
StatusDisplay
tM
will remain turned on for longer time (3 min) .
the headset is still active .
Light indicator on charging unit:
by the charge plug on the charging unit a light indicator shows
different states of the charging unit . that way you will always
know if the charging unit needs to be charged .
Portable charging unit - light indicator
Solid red light
Is charging (red light will turn off when
fully charged)
Single green flash
enough battery to charge headset
1 full time or more
Single red flash
Portable charger needs to be charged
UsInG YoUR JABRA stone WItH tWo MoBILe
DeVICes
the Jabra Stone is capable of having two mobile phones (or
devices) connected to the headset at the same time .
this will give you the freedom of having only one headset to
operate both of your mobile phones .
How to pair your Jabra STonE with 2
devices:
1 Pair device number 1 with your headset using the pairing
instruction above for re-pairing your headset (if device 1 is
paired to your headset already go to step 2)
2 turn your headset off manually by pressing the answer/end
button for 4-5 seconds
3 Pair device number 2 with your headset using the same pairing
instruction again
4 Connect to device 1 again
Please note that it is important to connect to device 1 again after
pairing device 2 to ensure connection to both devices .