Jabra T5330 User Manual - page 5
5
E
n
g
li
sh
3.7
3.6
3.9
3.8
3.4
4.1
4.5
4.6
4.7
4.8
4.2
4.3
4.4
revideret
20/03/06
27/05/06
revideret
20/03/06
4.1
4.5
4.6
4.7
4.8
4.2
4.3
4.4
revideret
20/03/06
27/05/06
revideret
20/03/06
3.1
3.2
3.3
3.4
3.5
3.1
3.2
3.3
3.4
3.5
3 sec
5.1
5.2
5.3
5.4
4.1
4.5
4.6
4.7
4.8
4.2
4.3
4.4
revideret
20/03/06
27/05/06
revideret
20/03/06
3.5
3.4
Place headset in charge cradle
and charge a minimum of 30 min.
before use. A full charge takes about 2
hours. Visual indicator on headset will
flash green while headset is charging,
and light steady green when fully
charged.
3.5
Turn on headset by pressing
answer/end button for 3 sec. (visual
indicator will light green for 2 sec.
and two “beeps” will be heard), or by
placing headset in charge cradle. Turn
off headset by pressing answer/end
button for 3 sec. (visual indicator will
light red for 2 sec. and two “beeps” will
be heard).
Clear dial tone
3.6
Take headset out of charge
cradle and put it on.
3.7
Lift handset from telephone and
listen for a dial tone in headset.
3.8
If dial tone is missing or unclear,
slowly slide the clear dial tone switch
on bottom of base unit through the 3
settings.
3.9
Set switch to the position that
gives the clearest dial tone.