JABSCO 18510-0010 User Manual

Model 18510-0010

COMMERCIAL DUTY

“CENTRI PUPPY”

Bronze Centrifugal DC Motor/Pump Unit

FEATURES

Body & Impeller

Bronze

Seal

Carbon/Ceramic with Buna N 

Port Size

3/4” NPT Internal 

Motor

12 Volt DC Permanent Magnet,

Fully Enclosed, Ignition Protected 

Shaft

Stainless Steel 

Weight

8 lb, (3,6 kg) approx. 

Motor meets USCG Electrical Standards (Title 33,

Chapter I, Part 183; Subpart I) for IGNITION PROTEC-

TION on gasoline powered vessels.

PERFORMANCE 

(Nominal 12 Vdc System)

*FUSE/

FEET OF

AMPS

BREAKER

PSI

WATER GPM

21

25

open

open

25

18

25

4.3

10

20

17

25

5.2

12

18

16

25

6.0

14

15

13

25

6.9

16

13

3

25

9.0

18

Shut-off

Model 18510-0010

APPLICATION

Suited for many general pumping applications where a

flooded intake condition exists. This pump is NOT SELF-

PRIMING. Typical uses include diesel fuel transfer (NOT

GASOLINE), feed pump for spraying systems, irrigation,

cooling systems for dairy, watering stock, washdowns,

vehicle heating systems, machinery cooling systems

and cutting saw blade cooling.

INSTALLATION

The pump must be mounted in a dry location -the motor

is not waterproof and must not be submerged. The unit

can be mounted in any desired position. It is best mount-

ed so that water dripping from loose port connection will

not wet the motor. The pump head may be mounted at

90 degree increments on the motor to allow mounting as

needed.

* Customer supplied, not included with pump.

WARNING

!

Explosion hazard.  Do not pump 

gasoline, solvents, thinners or other 

flammable liquids.  To do so can cause 

an explosion resulting in injury or death.

Explosion hazard.  Do not operate with 

rivets removed from motor case.  

Explosion resulting in personal injury, 

death or property damage can occur.  

Case openings must be sealed to avoid 

explosion and maintain ignition 

protected rating.

WARNING

!