Air hydraulic pump jackco transnational inc. © 2009 south el monte, ca 888-452-2526 www.Jackco.Com instruction model 842.
For your safety read all instructions, warnings and cautions carefully. Follow all safety precautions to avoid personal injury or property damage during system operation. Jackco cannot be responsible for damage or injury resulting from unsafe product use, lack of maintenance or incorrect product and...
Instruction product description -10,000 psi air hydraulic pump designed to operate @90-120 psi air source. -this equipment allows quick displacement of hydraulic fluid up to 1600 c.C/97 cu.In.. -foot pedal design delivers a smooth, controllable flow to and from the intended application. Specificatio...
Air removal removing air from the hydraulic system will help the cylinder to advance and retract smoothly. Pump with single-acting cylinder • position pump at higher elevation than cylinder. • position cylinder with plunger end down (up if using pull cylinder) • operate pump to fully extend the cyli...
Troubleshooting problem possible cause solution cylinder does not advance, advances slowly, or advances in spurts. 1. Oil level in pump reservoir is low. 2. Release valve open. 3. Loose hydraulic coupler. 4. Load is too heavy. 5. Air trapped in system. 6. Cylinder plunger binding. 1. Add old accordi...
Model: 842 parts list.
Part # description q'ty part # description q'ty part # description q'ty 01 treadle 1 31 cup seal 1 60 o-ring 1 02 reservoir 1 32 copper ring 1 61 air v alve stem 1 03 packing 1 33 nut 1 62 bolt m4 1 04 pump base 1 34 back-up ring 1 63 spring 1 05 set screw 2 35 spring 1 64 air v alve body 1 06 sprin...
Limited one year warranty jackco transnational inc. Warrants all jackco equipment and tools to the original purchaser against any manufacturing defect in material or workmanship for a period of one (1) year from the original date of purchase. If the defective equipment or tool is determined to be co...
