Parker-style solenoid valve repair kits 07610-003-05-39 a april 15, 2005 dishmachine component maintenance instructions.
Many jackson dishmachines are equipped with electrical solenoid valves to allow for automatic fill and rinse. These valves are designed to specific tolerances and design aspects that must be met in order to function properly. Jackson offers repair kits for replacing some of the wear items associated...
4. When replacing the coil, ensure that when removing the coil wire cover that care is taken not to damage the wires inside. Using the medium flathead screwdriver, gently use it to open the cover enough to where it could be pulled off. 5. Once the coil wire cover has been removed and set to the side...
To remove the valve in order to perform this and any further steps. Be careful not to damage the plumbing assembly. Only use the pipe wrench enough to where you can spin the valve bonnet off with your hand. 13. Slowly remove the valve bonnet. Note: the spring for the plunger is located directly unde...
20. Using the small flathead screwdriver, lift out the screen retain- er. Verify that the holes in it are free of clogs and debris. 21. Again using the small flathead screwdriver, carfully remove the mesh screen from inside the valve body. The screen should be taken and rinsed out to remove any debr...
