1. DL manuals
  2. Jackson
  3. Dishwasher
  4. ECOLAB ES-2000
  5. Installation & Operation Manual

Jackson ECOLAB ES-2000 Installation & Operation Manual

Manual is about: ES SERIES DOOR TYPE, CHEMICAL SANITIZING, SINGLE AND DUAL RACK DISHMACHINES

Summary of ECOLAB ES-2000

  • Page 1

    Installation & operation manual for ecolab models: es-2000 es-2000-cs es-2000hh es-2000hhv es-2000-v es-2000xsp es-2000xsp-ph es-4000 es-4000xsp es-4000cdl es-4000cdr www.Ecolab.Com es series door type, chemical sanitizing, single and dual rack dishmachines december 5, 2007 p/n 7610-011-35-10 (revis...

  • Page 3

    Revision/ page revision date made by applicable ecn details i 03-16-04 maw n/a, 6935 added both chemical feeder pump rollers. Added ecolab #96582747. Converted to the new layout. Added viton pump seal 5330-002-87-16 j 04-26-04 maw n/a added ecolab numbers. K 08-31-04 maw n/a added es-2000hh and es-2...

  • Page 4

    Ii nomenclature for the models covered in this manual es-2000-v es = door type, chemical sanitizing 2000 = single rack dishmachine 4000 = dual rack dishmachine cs = omega design cdl = corner model with left hand entry cdr = corner model with right hand entry hh = higher hood hhv = higher hood with v...

  • Page 5

    Section description page i. Specification information specifications of the es-2000 series models 2 specifications of the es-4000 series models 3 dimensions (es-2000/es-2000xsp/es-2000xsp-ph) 4 dimensions (es-2000-cs) 5 dimensions (es-2000hh) 6 dimensions (es-4000/es-4000xsp) 7 dimensions (es-4000cd...

  • Page 6

    Section description page miscellaneous parts (es-2000 & es-4000) 66 door assemblies (es-2000) 67 door assemblies (es-4000) 68 false panel option 69 es-4000cdl assembly options 70 es-4000cdr assembly options 72 vapor vent option assembly (revision a) 74 vapor vent option assembly (revision b) 75 sdi ...

  • Page 7: Section 1:

    1 section 1: specification information.

  • Page 8

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 1: specification information es-2000 series specifications 2 performance/capabilities operating capacity (es-2000’s) (racks/hour) racks per hour 40 racks per hour (option) 48 dishes per hour...

  • Page 9

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 1: specification information es-4000 series specifications 3 performance/capabilities operating capacity (racks/hour) racks per hour 80 racks per hour (option) 96 dishes per hour 2000 glasse...

  • Page 10

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 1: specification information dimensions es-2000/es-2000xsp-ph 4 4” min. Es-2000/xsp 25 1/4” es-2000xsp-ph 25 3/4” top view rack guides in straight through configuration 5” min top view rack ...

  • Page 11

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 1: specification information dimensions es-2000-cs 5 legend a - water inlet (1/2”npt) b - electrical connection point c - drain (2” npt) d - standard clearance between machine and wall (with...

  • Page 12

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 1: specification information dimensions es-2000hh 6 4” min. Top view rack guides in straight through configuration 5” min top view rack guides in corner configuration 12” 24 1/4” doors 27” m...

  • Page 13

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 1: specification information dimensions es-4000/es-4000xsp 7 top view front view right side view a - drain connection - 2” npt b - electrical connection c - water inlet - 3/4” npt d - servic...

  • Page 14

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 1: specification information dimensions es-4000cdl 8 20 3/4” opening 4 1/2” minimum 2 1/2” 1 1/2” 5” 19” opening 20 3/4” opening 2 1/2” 3 1/2” 4” minimum 2 1/2 “ a - drain-gravity 2” npt b -...

  • Page 15

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 1: specification information dimensions es-4000cdr 9 19” opening 12 3/8” 2 1/2” 5” 2 1/2” 20 3/4” opening 4 1/2” minimum 1 1/2” 20 3/4” opening 2 1/2” 4” minimum 3 1/2” a.- drain-gravity 2” ...

  • Page 16

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 1: specification information table dimensions 10 table dimensions corner installation table dimensions connection to dishmachine table dimensions straight through installation 20 1/2” openin...

  • Page 17: Section 2:

    11 section 2: installation/operation instructions.

  • Page 18

    Visual inspection: before installing the unit, check the container and machine for damage. A damaged container is an indi- cator that there may be some damage to the machine. If there is damage to both the container and machine, do not throw away the container. The dishmachine has been inspected and...

  • Page 19

    Electrical power connection: electrical and grounding connections must comply with the applicable portions of the national electrical code ansi/nfpa 70 (latest edition) and/or other electrical codes. Disconnect electrical power supply and place a tag at the disconnect switch to indi- cate that you a...

  • Page 20

    Preparation: before proceeding with start-up verify the following: a. Sump strainer is in place. B. Drain stopper is installed. C. Check that the wash arms are securely screwed into the stationary bases and rotate freely. Also check that the end plugs are securely screwed into the ends of all wash a...

  • Page 21

    Warning: certain materials, including silver, silver plate, aluminum and pewter, are attacked by sodium hypochlorite sanitiz- ers (bleach). Preparing dishes: preparation of the ware will help ensure good results and less re-washes. If not done properly the dish- es will not be clean and will reduce ...

  • Page 22

    To prepare pumps for operation the es-2000/es-4000 dishmachines are supplied with detergent, rinse additive and sanitizer dispensing chemical feeder pumps. Locate the open ends of the chemical tubes with the tube stiffeners and place each one in the appropriate container. A. Red tubing = detergent b...

  • Page 23

    Machines that are equipped with the xsp package have a unique feature over other ecolab models such as the es-2000 or es-4000: the xsp machines use solid, rather than liquid detergent and rinse aid products (all machines use liquid sanitizing agents). The solid product dispensing system is self-cont...

  • Page 24

    Note: the sanitizer chemical feeder pump requires priming when the machine is first installed or when air enters the sanitizer agent line. Sanitizer pumps are normally locat- ed on the lower half of the machine and the prime switch will be nearby. Note: water must be in the sump and wash tank prior ...

  • Page 25

    1. Set the detergent feed time to four seconds for es-2000xsp(ph), or six seconds for the es-4000xsp. Adjust the detergent cam timer so that the four or six second detergent spray begins immediately after the wash cycle starts. 2. Set the flush time (detergent flush cam) to 10 seconds. The flush mus...

  • Page 26

    1. Set rinse aid feed time to four seconds for the es-2000xsp(ph) or six seconds for the es-4000xsp. If the account has very hot water temperature (160 ° f or greater), use one or two seconds as a starting point instead of the normal four to six seconds. Adjust the rinse aid cam timer so that the ri...

  • Page 27

    The es-2000/es-4000 cam timer is a 1 minute, 30 second, 8-cam timer that controls the operation of the dishmachine. The fol- lowing is a description of the set points for each cam and the function of each switch. Note: the es-2000-v has an additional time circuit which adds 30 seconds to the end of ...

  • Page 28

    Cam 6: cam 6 is an adjustable can and controls the detergent pump. Function: the detergent pump cam works off the normally closed contacts of cam 6. This requires the switch arm to be held open by the cam and allowed to drop into the notch to operate the pump. The time that the detergent pump will r...

  • Page 29: Section 3:

    23 section 3: preventative maintenance.

  • Page 30

    The dishmachines covered in this manual are designed to operate with a minimum of interaction with the operator. However, this does not mean that some items will not wear out in time. There are many things that operators can do to prevent catastrophic damage to the dishmachine. One of the major caus...

  • Page 31: Section 4:

    25 section 4: troubleshooting.

  • Page 32

    Warning: inspection, testing and repair of electrical equipment should be performed only by qualified service per- sonnel. Certain procedures in this section require electrical tests or measurements while power is applied to the machine. Exercise extreme caution at all times. If test points are not ...

  • Page 33

    Problem: dishmachine will not fill, though other functions work. 1. Y-strainer on incoming water line plugged or clogged. Remove strainer and clean out. 2. Water supply valve(s) turned off. Turn the valve(s) on. 3. Faulty solenoid valve diaphragm. Replace diaphragm, clean foreign material out of val...

  • Page 34

    Problem: dishmachine runs with the door open. 1. The door switch may be shorted out. With the machine off, open the doors, and with both wires to the door switch unplugged, measure the continuity between the wires on the switch. If there is continuity, replace the switch. 2. Faulty wash relay. Turn ...

  • Page 35

    White/red wires to the delime switch. If it reads 120 volts, replace the switch. Problem: sanitizer pump doesn’t run during the cycle or through the prime switch. 1. Loose sanitizer pump motor wire. Verify and tighten connections to the motor. 2. Faulty sanitizer pump motor. If you read 120 volts at...

  • Page 36

    Xsp units only! Problem: es-2000xsp/es-2000xsp-ph machine will not run. Wash motor will run if wash relay is depressed manual- ly (nothing else works). 1. Open detergent safety switch. With door closed and detergent capsule in place, measure for voltage between the white/black and orange/blue wires ...

  • Page 37: Section 5:

    31 section 5: service procedures.

  • Page 38

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 5: service procedures rinse solenoid valve repair parts kit 32 these dishmachines are equipped with electrical solenoid valves to allow for automatic fill and rinse. These valves are designe...

  • Page 39

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 5: service procedures rinse solenoid valve repair parts kit (continued) 33 4. When replacing the coil, ensure that when removing the coil wire cover that care is taken not to damage the wire...

  • Page 40

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 5: service procedures rinse solenoid valve repair parts kit (continued) 34 13. Slowly remove the valve bonnet. Note: the spring for the plunger is located directly under the bonnet and may c...

  • Page 41

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 5: service procedures rinse solenoid valve repair parts kit (continued) 35 19. Using the small flathead screwdriver, lift out the screen retainer. Verify that the holes in it are free of clo...

  • Page 42

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 5: service procedures vacuum breaker repair parts kit 36 these dishmachines are equipped with vacuum breakers to serve as back-flow prevention devices. Asse requirements specify what type of...

  • Page 43

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 5: service procedures vacuum breaker repair parts kit (continued) 37 6. Your repair kit comes with a new plunger. Examine the old one and ensure that the mating surface is not damaged or cut...

  • Page 44: Section 6:

    38 section 6: parts section.

  • Page 45

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section standard parts 39 hardware- stainless steel ecolab no. Description jackson no. 96023832 screw 4-40x1/4" 05305-002-32-38 96584354 screw 4-40x3/8" n/a 88120365 screw 4-40x1/2"...

  • Page 46

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section standard parts (continued) 40 88429113 nut lock 1/4-20 05310-374-01-00 88419056 nut lock 5/16-18 n/a 88419007 nut lock 3/8-16 05310-011-72-55 88520000 washer flat 1/4 05311-...

  • Page 47

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section standard parts (continued) 41 96570221 terminal spade #10hole 14-16ga n/a 96032271 terminal spade .25hole 12-10ga n/a 96032701 terminal spade .25hole 16-14ga n/a 83100073 te...

  • Page 48

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section chemical feeder pump assembly 42 roller, red (detergent/sanitizer) ecolab no.: 96037924 mfg. No.: 04320-111-36-70 roller, white (rinse aid) ecolab no.: 84800041 mfg. No.: 04...

  • Page 49

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section solenoid valve 43 screw data plate 110/240 volt coil & housing only ecolab no.: 85289411 mfg. No.: n/a valve bonnet diaphragm retainer diaphragm o-ring plunger spring screen...

  • Page 50

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section vacuum breaker repair parts kits 44 1/2” complete vacuum breaker assembly ecolab no.: 85242543 mfg. No.: 04820-003-06-13 3/4” complete vacuum breaker assembly ecolab no.: 85...

  • Page 51

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section control box assembly 45 item qty description ecolab no. Mfg. No. 1 1 contactor, motor 83008250 05945-109-05-69 2 1 ground lug 83118000 05940-200-76-00 3 7 locknut, 10-24, s/...

  • Page 52

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section control box assembly (continued) 46 item qty description ecolab no. Mfg. No. 1 terminal block spacer 96025127 05700-011-40-05 10 1 control relay (es-2000) 96582895 05945-111...

  • Page 53

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section hood assemblies es-2000 47 item qty description ecolab no. Mfg. No. 1 1 hood weldment (es-2000) 96581962 05700-031-37-57 1 1 hood weldment (es-2000 27”) n/a 05700-031-42-44 ...

  • Page 54

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section hood assembly & associated parts es-2000-cs 48 gasket, rinse plumbing ecolab no.: 96020482 mfg. No.: 5330-111-42-81 air gap weldment ecolab no.: 96028063 mfg. No.: 05700-002...

  • Page 55

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section es-2000hh series hood assemblies 49 es-2000hh hood weldment ecolab no.: n/a mfg. No.: 05700-002-97-77 right/left front outer door guide ecolab no.: n/a mfg. No.: 05700-031-7...

  • Page 56

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section hood assembly es-4000 50 item qty description ecolab no. Mfg. No. 1 1 hood weldment, es-4000 old style 96550389 05700-041-45-37 1 1 hood weldment, es-4000 new style n/a 0570...

  • Page 57

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section cantilever arm (double bracket mount) 51 3 5 2 1 6 9 15, 16 17, 18 19, 11, 12 20 21, 25 22 25, 26 23, 18 7 8 4 24, 18 14 13 10, 11, 12 detail of yoke assembly.

  • Page 58

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section cantilever arm (double bracket mount) (continued) 52 item qty description ecolab no. Mfg. No. 1 1 arm, cantilever es-2000/es-2000-cs 96581277 05700-031-50-67 1 1 arm, cantil...

  • Page 59

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section es-2000hh series cantilever arm/door assemblies 17, 18 31, 24 33, 34 6 3, 4, 5 2 1 7 28 27, 22 29, 30 17, 18 26 25, 4, 5 23, 4, 24 10 9 19, 20 17, 18 32, 22 21, 22 kit, door...

  • Page 60

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section es-2000hh cantilever arm/door assemblies (continued) 54 item qty description ecolab no. Mfg. No. 1 1 cantilever arm n/a 05700-031-92-44 2 2 sleeve, cantilever arm 96582770 0...

  • Page 61

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section cantilever arm assembly (single bracket mount) 55 item qty description ecolab no. Mfg. No. 1 1 hex nut, 1/4”-20 with nylon insert 88429113 05310-374-01-00 2 1 wear strip, uh...

  • Page 62

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section tub assembly es-2000 56 see page entitled “pump & motor assembly” 23 2 3 4 5, 1 see page entitled “wash manifold assembly” 7 8 9 10 12 24* 13 14, 6* 19 15 18* 21 22 17* 16 1...

  • Page 63

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section tub assembly (left front view) es-4000 57 * represents an item not shown. Item qty description ecolab no. Mfg. No. 1 2 lower wash manifold weldment 96583596 05700-031-46-00 ...

  • Page 64

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section tub assembly (right front view) es-4000 58 item qty description ecolab no. Mfg. No. 1 7 locknut, 10-24 s/s hex with nylon insert 88429063 05310-373-01-00 2 1 drain solenoid ...

  • Page 65

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section es-2000 & es-4000 frame & accumulator assemblies 59 es-2000xsp-ph frame weldment double bracket ecolab no.: n/a mfg. No.: 05700-002-23-31 es-2000xsp-ph casting, bottle holde...

  • Page 66

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section tub & frame assemblies es-2000-cs 60 strainer, accumulator weldment ecolab no.: 96028725 mfg. No.: 05700-002-20-45 accumulator weldment ecolab no.: 96028717 mfg. No.: 05700-...

  • Page 67

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section incoming plumbing assembly es-2000 & es-4000 series 61 1 2 3 4** 6 7 8 9 for xsp and xsp-ph units, replace item 8 with items 12 & 13. 4** note: depending on how old your es-...

  • Page 68

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section es-2000-cs incoming plumbing assembly & misc. Parts 62 y-strainer, 1/2" ecolab no.: 96027024 mfg. No.: 04730-217-01-10 nipple, 1/2” close 2 per ecolab no.: 85141208 mfg. No....

  • Page 69

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section wash manifold assembly es-2000 & es-4000 63 gasket, wash manifold 1 per es-2000 assembly 2 per es-4000 assembly ecolab no.: 96552864 mfg. No.: 05700-111-35-03 weldment, lowe...

  • Page 70

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section 64 pump & motor assembly item qty description ecolab no. Mfg. No. 1 2 pipe plug, 1/4” npt, brass 86135019 04730-209-01-00 2 1 volute (only available as an assembly, see item...

  • Page 71

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section es-2000-cs motor & pump assembly 65 impeller assembly ecolab no.: 96582103 mfg. No.: 05700-002-81-86 mechanical seal ecolab no.: 96582026 mfg. No.: 05330-002-34-22 other par...

  • Page 72

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section miscellaneous parts es-2000 & es-4000 66 stand pipe weldment ecolab no.: 96582747 mfg. No.: 05700-021-33-29 es-4000 intake pump strainer weldment ecolab no.: 96580170 mfg. N...

  • Page 73

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section es-2000 series door assemblies 67 es-2000 & es-2000 27” left door weldment ecolab no.: 96041108 mfg. No.: 05700-002-38-36 es-2000xsp-ph left door weldment ecolab no.: 965837...

  • Page 74

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 12-05-2007 revised: n/a section 6: parts section es-4000 door assemblies 68 left door weldment ecolab no.: 96041108 mfg. No.: 05700-002-38-36 front door weldment ecolab no.: 96583604 mfg. No.: 05700-002-38-40 right door ec...

  • Page 75

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section false panel installation 69 1. Loosen the rack assembly from the unit. 2. False panel will mount to the rack; inside the dishmachine. 3. Position panel in unit on side to be...

  • Page 76

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section es-4000cdl assembly options 70 1 2 2 6 9 12 21 22 23 24, 25 13 19 20 11 7 10 3 a 4 5 a 8 14 15 16 17 18.

  • Page 77

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section es-4000cdl assembly options (continued) 71 item qty description ecolab no. Mfg. No. 1 1 front door assembly n/a 05700-003-02-57 1 front door n/a 05700-003-02-56 2 door glide...

  • Page 78

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section es-4000cdr assembly options 72 1 3 19 11 10 9 20 21 22 16 17 18 5 4 4 23 2 a 6 7 a 8 11 13 12 14 15.

  • Page 79

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section es-4000cdr assembly options (continued) 73 item qty description ecolab no. Mfg. No. 1 1 hood weldment 96041033 05700-002-07-72 2 1 cantilever arm assembly n/a 05700-002-07-7...

  • Page 80

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section vapor vent option assembly (revision a) 74 nut, wing, nylon, 1/4”-20 2 per assembly ecolab no.: 96024005 mfg. No.: 05310-994-01-00 jet, full, 1/8” hhss6sq 2 per assembly eco...

  • Page 81

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section vapor vent option assembly (revision b) 75 nut, wing, nylon, 1/4”-20 2 per assembly ecolab no.: 96024005 mfg. No.: 05310-994-01-00 vapor vent (plastic vent only) 1 per assem...

  • Page 82

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section es-2000hhv sdi option 76 hood weldment for es-20000hhv interlock frame ecolab no.: n/a mfg. No.: 05700-002-92-30 interlock solenoid link ecolab no.: n/a mfg. No.: 05700-002-...

  • Page 83

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section 77 xsp dispenser assembly item qty description ecolab no. Mfg. No. 1 1 rinse aid cylinder 92381292 05700-021-60-28 2 1 rinse aid hopper screen 96200324 05700-011-48-91 3 1 d...

  • Page 84

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 6: parts section xsp solenoid mounting plate assembly 78 1 2, 3 4 5 6 7 8 8 9 10 11 12 13 14 15 17 16 18 item qty description ecolab no. Mfg. No. 1 1 xsp controller weldment 92387604 05700-0...

  • Page 85: Section 7:

    79 section 7: electrical schematics.

  • Page 86

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 7: electrical schematics es-2000/es-2000-cs (115 volt, 60hz, single phase) 80

  • Page 87

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 7: electrical schematics es-2000-v/es-2000hhv (115 volt, 60hz, single phase) 81.

  • Page 88

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 7: electrical schematics es-2000xsp/es-2000xsp-ph (115 volt, 60hz, single phase) 82 9905-031-50-20

  • Page 89

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 7: electrical schematics es-4000 (115 volt, 60hz, single phase) 83.

  • Page 90

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 7: electrical schematics es-4000cdl/es-4000cdr (115 volt, 60hz, single phase) 84.

  • Page 91

    Es-2000 & es-4000 series installation/operation manual 7610-011-35-10 issued: 10-29-2007 revised: n/a section 7: electrical schematics es-4000xsp (115 volt, 60hz, single phase) 85.