1. DL manuals
  2. Jackson Grills
  3. Grill
  4. 700 Series
  5. Owner's Manual

Jackson Grills 700 Series Owner's Manual

Other manuals for 700 Series: Owner's Manual
Manual is about: Jackson Outdoor Gas Barbeque Owner's Manual

Summary of 700 Series

  • Page 1

    Outdoor gas barbeque owner’s manual this manual is for use with 700, 700bi and 850bi series grills warning: please read and understand the contents of this manual fully before operating. Failure to do so may result in fire or explosion. Homeowners should retain these instructions. All barbecues and ...

  • Page 2: Table of Contents:

    2 table of contents: safety. 3 lp gas cylinder replacement. 4-5 opd equipped cylinder. 6 hose and regulator. 6 leak testing. 7 installation. 8 clearances. 9 assembly. 10-13 getting to know your grill 14 lighting instructions. 15 gas conversion. 16-18 maintenance. 19 grilling tips and techniques. 20 ...

  • Page 3: Safety:

    3 safety: your new jackson grill barbeque is a safe, convenient appliance when used and maintained properly. As with all gas-fired appliances, certain safety precautions must be observed. Failure to follow these precautions may result in damage or injury. If you have any questions or concerns regard...

  • Page 4: Lp Gas Cylinder Placement:

    4 lp gas cylinder placement: cylinders must be installed according to assembly instructions. Install the gas cylinder into the tank hole inside of the jackson pedestal. Lp gas cylinder: qcc-1 quick closing coupling your grill is designed to be used with an lp gas cylinder equipped with the new qcc-1...

  • Page 5: Handling:

    5 handling: 1. Government regulations prohibit shipping full lp gas cylinders. You must take your new cylinder to an lp gas dealer for filling. 2. A filled lp gas cylinder is under very high pressure. Always handle with care and transport in the upright position. Protect the valve from accidental da...

  • Page 6: Opd Equipped Cylinder:

    6 opd equipped cylinder: effective january 1, 1998, the standard for outdoor gas appliances, ansi z21.58/can cga-1.6, requires that appliances are to be used with cylinders equipped with an overfill prevention device (opd). The opd is designed to reduce the potential for the overfilling of propane c...

  • Page 7: Leak Test:

    7 4. Leak test the connection. See “leak test”. 5. Refer to lighting instructions. To avoid activating the flow limiting device when lighting, open the cylinder valve slowly with the appliance valves off. If the flow limiting device is accidentally activated, turn off cylinder valve and appliance va...

  • Page 8: Installation:

    8 installation: in canada, this appliance must be installed in accordance with the local code and relevant cga standards: can/cga-b149.1 lp gas/propane installation code and latest codes where applicable. In the usa, this appliance must be installed in accordance with the local code and relevant nat...

  • Page 9

    9 installing 700bi / 850bi into a non combustible island. All dimensions are in inches: 700bi 850 bi a 32.5 39.5 b 9.25” 9.25” c 17” 17” d 10.25” 10.25” e 3” 3” f 17.25” 17.25” g 24.25” 24.25” h 24” min. 24” min. I 18.5” 18.5” j 5.5” min 5.5” min installing 700bi / 850bi into a combustible island. N...

  • Page 10: Assembly:

    10 assembly: please ensure the proper tools are used for ease of installation. Some assembly will be required if this unit is installed in a pedestal. Please remove all components from the packaging and inspect all components to ensure there is no damage to any components in the packaging. If damage...

  • Page 11

    11 secure the condiment bins to the display panel using the screws from the securing plates. After the side shelves have been installed, ensure the grill head is pushed back in the pedestal as far as possible. With the screws removed from the securing straps, place a screw through the side of the co...

  • Page 12

    12 rotisserie rod bushing placed on the cut out provided on the inner hood rotisserie kit completed installation upper flavor shield, cooking grid installation. Remove the upper flavor shields form the packaging. Please ensure that all protective plastic has been removed from these parts. These uppe...

  • Page 13

    13 main gas line connections for propane gas and natural gas. The main fuel supply gas line is connected to a manifold tee securely mounted inside the pedestal located on the left hand side of the pedestal. Remove the propane hose and regulator assembly from the packaging. Please ensure that there i...

  • Page 14: Getting to Know Your Grill.

    14 getting to know your grill. 1 outer hood handle 11 pull out grease tray 2 hood thermometer 12 main control knobs / display panel 3 outer hood 13 electronic ignition 4 cooking grids 14 side burner side shelf 5 side shelf 15 warming rack 6 condiment bins x 2 16 infrared rear burner 7 pedestal 8 ped...

  • Page 15

    15 h i me d lo w hi m ed lo w main burner lighting to light the main burners always start with the left hand burner first. Turn the left hand control knob to hi and depress the igniter button. Once this burner has lit, simply turn the next control knob to the right to high and this burner will light...

  • Page 16: Operating The Rear Burner

    16 operating the rear burner when operating the rear burner please ensure that the warming rack is removed. The warming rack will become damaged if not removed while the rear infrared burner is in use. The rear burner is specially designed to be used with the rotisserie kit, and should only be used ...

  • Page 17: Rear Burner.

    17 4 using a 13 mm wrench undo all of the main burner orifices from the underside of the display panel. Place then aside form any other orifices included in the natural gas conversion kit. 5 using an approved thread sealant, replace the main burner orifices with the new natural gas orifices supplied...

  • Page 18: Side Burner

    18 side burner 1 open the side burner lid and remove the grate over the burner head. 2 undo the 2 phillips head screws that hold the flame thrower (burner ignition) and very carefully move away from the burner head. 3 undo the 3 screws that hold the burner head onto the side shelf base. 4 remove the...

  • Page 19: Gas Line

    19 gas line remove the 3/8” flare fitting that attaches the propane hose from the manifold block inside of the pedestal and replace with an approved 10’ natural gas hose neoprene hose. Part # nghose remember to leak check all fittings and orifices after all of the conversion is completed, leak check...

  • Page 20: Rotisserie Cooking:

    20 food safety tips and techniques we want to enjoy healthy and safe grill cooking, so here are some tips for basic barbecue hygiene: bacteria are living organisms that grow and multiply rapidly in warm moist foods. Marinate meat in the refrigerator and take it out one half hour before grilling, if ...

  • Page 21

    21 trouble shooting problem possible causes solution low heat or low flame when valve turned to high. For propane – improper lighting procedure. Ensure lighting procedure is followed carefully. All gas grill valves must be in the off position when the tank valve is turned on. Turn tank on for all pr...

  • Page 22: -  Parts List

    22 - parts list part number part description quantity 1 07-400 outer hood 1 2 04-3403 warming rack bracket 2 3 07-402 hood handle 1 4 07-4505 thermometer 1 5 07-403 inner hood 1 6 07-404 rear burner mount 1 7 07-4508 inner hood back cover 1 8 07-405 warming rack 1 9 04-34510 collector box 1 10 07-45...

  • Page 23: Exploded View

    23 exploded view 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 41 42 25 1 2 3 4 5 6 7 8 12 2 14 18 50 26 28 9 10 11 13 16 24 30 30

  • Page 24

    24 jackson grills limited lifetime warranty jackson grills inc. Warrants the following materials and workmanship to be free of defects for as long as you own the grill. This covers the following components: main stainless steel outer hood, stainless steel cooking grills, stainless steel outer pedest...

  • Page 25

    25 a special message to our customers thank you for choosing the jackson grill for your new gas grill. This appliance is designed with quality components and we are confident that it will provide you with years of excellent operation. Please take the time to read the whole manual and familiarize you...