Jackson Grills JFP-LP Owner's Manual - Certification & Testing:
6
CERTIFICATION & TESTING:
This appliance has been tested by Labtest Certification Inc. (LC), test to ANSIZ271.97-2010 & CSA CAN
1-2.21-M85, Certified for use in Canada and the USA.
PACKAGE CHECK LIST:
PARTS CHECKLIST
:
1
Lid and Tee Handle
1
Wind Guard Ring (Stainless)
1
Base Body with burner
1
Propane Hose & Regulator
1
Log Set
1
Bag of Embers
1 Bungee Cord
1 Owner’s Manual
1
Natural Gas Conversion Orifice
ASSEMBLING YOUR PATIO FIRE:
STEP 1:
Remove the lid by twisting the tee handle counter clockwise until the lid assembly is released from the body.
Set aside the embers for later installation.
STEP 2:
Check that the hose and regulator assembly is securely fastened to the campfire body. (For use with propane
gas).
The LP-gas supply cylinder must be shut off and disconnected when this appliance is not in use.
The LP-gas supply cylinder(s) to be used with this campfire must be arranged for vapor withdrawal and must
include a collar to protect the cylinder valve.
The LP-gas supply cylinder(s) must be constructed and marked in accordance with the specifications for the
LP-gas cylinders Standards, CAN/CSA B339, Cylinders, Spheres and Tubes for Transportation of Dangerous
Goods.
STEP 3:
Place the first log gently over the center tube and alignment pin. The burner ports form an outline of the log; this
will aid in correct alignment. (fig.1 & 2)
Fig. 2
TECH TIP
Logs are fragile!
Handle with care to
avoid breakage.
Fig. 1
TECH TIP
Do not throw away packaging
until you have confirmed that
all parts are present.