Jackson Grills JGSBDBL-LP Owner's Manual

Summary of JGSBDBL-LP

  • Page 1

    1 models: jgsbdbl-lp (propane) jgsbdbl-ng (natural gas) version: oct 2015 owner’s manual: double side burner !Important notice! Please read all safety notices on pp. 2 before assembling or operating this side burner.

  • Page 2: !safety Warnings!

    2 !Danger! If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open lid. 4. If the odor continues, keep away from appliance and immediately call your gas supplier or your fire department. !Warning! 1. Do not store or use gasoline or other flammable liquids or vapors ...

  • Page 3: Certification & Testing

    3 certification & testing this side burner has been tested by labtest certification (lc) and has been tested to ansi z21.58b-2012 & csa 1.6b-2012, and certified for canada and the usa. Note: the use and installation of this product must conform to local codes. In the absence of local codes, use the ...

  • Page 4

    4 flexible fuel line: jf-83 cook grids: jg-19 x 2 control heat shields: jh-156 x 2 burners: jb-22 x 2 electrodes: je-14 x 2 manifold: jf-86 gas valve: jf-100 x 2 control knob: jk-14 x 2 chrome bezels: jk-17 x 2 exploded diagram & parts list: orifice sizes: propane: jf-141 (x 2) #64 (11” w.C.) natura...

  • Page 5

    5 tech tip it is recommend that a certified gas fitter be used to install fuel lines and other fuel related components. Figure 1 installation into built-in cabinet *: *note: this side burner kit does not fit jackson cart model barbeques. Step 1 cut hole in cabinet to size as shown: (figure 1: j,k,l ...

  • Page 6: Clearance To Combustibles:

    6 clearance to combustibles: a) top: from top of grate to any *combustibles above unit: 5 feet minimum *such as decks, ceilings, hanging plants, etc. B) rear: from rear of unit to any combustibles behind unit: 1 inch minimum c) side: from the outside edges the unit to any adjacent combustibles: 1 in...

  • Page 7

    7 gas conversion*: (optional orifice not included) 1. Remove the cook grids, control heat shield, and burners. 2. Remove the original orifices (2) , using a ¼” socket wrench, with an extension and 7mm socket (fig. 3) 3. Lightly coat threads of the replacement orifices* with teflon tape or gas fittin...

  • Page 8: Limited Warranty:

    8 limited warranty: model: jgsbdbl-lp & jgsbdbl-ng side burner jackson grills warrants the materials and workmanship in this accessory to be free of defects for two (2) years from the date of purchase. Limited warranty subject to the following conditions & limitations: note1: shipping and labor char...