Assembly, use and care manual manual for models: jls400-lp model names: lux series 2 burner pedestal model for outdoor use only danger if you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open lid. 4. If odor continues, keep away from the appliance and immediately cal...
2 table of contents messages to our users -----------------2 installer final check list-------------------14 important ------------------------------------4 grill lighting instructions-------------------14 installation safety precautions---------5 operation instructions-----------------------16 expl...
A special message to our customers: thank you for choosing the jackson grill for your new gas grill. This appliance is designed with quality components and we are confident that it will provide you with years of excellent operation. Please take the time to read the whole manual and familiarize yours...
4 important the symbols and boxes shown below explain what each symbol means. Read and follow every message found in this manual. !!! Danger !!! Danger: indicates an imminently hazardous situation which will result in death or serious bodily injury if not followed. !!! Warning !!! Warning: warning o...
5 installation safety precautions !!! Warning !!! Do not try to install t his appliance without reading the “installation safety precautions ” section of this manual. 1. This grill is designed to use l.P. Gas only. Only use this grill with l.P. Gas and the regulator assembly supplied by the manufact...
6 exploded view & parts list.
7 exploded view & parts list ** part number format for ordering replacement parts is as follows: jls400-ref# example: jls400-45 : lux 400 control panel ref# description q ’ty ref# description q ’ty 01 thermometer 1 27 ball head nuts 4 02 hood rubber bumpers 2 28 step bolts 4 03 black insulator 2 29 ...
8 assembly instructions please ensure the proper tools are used for ease of installation. Please remove all components from the packaging and inspect all components to ensure there is no damage to any components in the packaging. Please remove all packaging from all components of the gas grill befor...
9 flame diffusers, cooking grids installation: 1. Remove the flame diffusers form the packaging. Please ensure that all protective plastic has been removed from these parts. These flame diffusers should be placed on the ledge installed on the firebox front and rear. Ensure that all of the flame di...
10 for your safety: ensure that the black plastic grommets of the regulator provided are in place and that the hose does not come into contact with the heat shield or the grill head. connect the regulator to the l.P. Tank: very important: a. The regulator shall incorporate in such a location that ...
11 because surplus gas may leak from safety relief valve. The safety relief valve on a l.P. Tank could activate to release gas and cause a fire. 3. The spare l.P. Tank must have safety caps installed on the l.P. Tank outlet. 4. If any gas leaks are found on the spare l.P. Tank, immediately go away f...
12 4. After all the propane orifices are removed from the grill place them in a safe spot away from your work area. This will ensure you do not re-install the propane orifices. 5. Using an approved thread sealant, replace the main burner orifices with the new natural gas orifices supplied. 6. Before...
13 leak testing general although all gas connections on the grill are leak tested at the factory prior to shipment, a complete gas tightness check must be performed at the installation site due to possible mishandling in shipment, or excessive pressure unknowingly being applied to the unit. Period...
14 installer final check list at least 36 ” clearance maintained from combustible constructions to the sides and back of this grill. There is no unprotected combustible construction over the grill. All internal packaging removed. Burners are sitting properly on orifices. Knobs turn freely. The regul...
15 to light rear burner of the grill: the warming rack must be removed before lighting the rear burner! 1. Read instructions before lighting. 2. Turn all knobs to “off” then open the l.P. Tank valve. Always keep your face and body as far from the grill as possible when lighting 3. Open lid during ...
16 operation instructions !!! Caution !!! 1. Clean your grill often. Failing to do so may cause a grease fire that may damage the grill. Please clean your grill frequently. 2. Never leave the grill unattended while using. 3. Do not use water to extinguish a grease fire, it may cause body injury. Tur...
17 using the grill: grilling require s high heat for searing and proper browning. Most foods are cooked at the “hi” heat setting for the entire cooking time. However, when grilling large pieces of meat or poultry, it may be necessary to turn the heat to a lower setting after the initial browning. ...
18 care & maintenance maintenance 1. Keep the grill area clear and free from combustible materials, gasoline and other flammable vapors and liquids. 2. Keep the holes in the three sides of the cart clear and free from debris, thus ensure the flow of combustion and ventilation air is unobstructed. ...
19 troubleshooting spider and insect warning spiders and insects can nest in the burners after storing, these nest can cause fires inside the tube or beneath the grill. This is very dangerous condition. So always clean the burners before use after storing. when to look for spiders inspect the bu...
20 grilling tips 1. The doneness of meat, whether rare, medium, or well done, is affected by the thickness to a large extent. 2. The cooking time is affected by the kind of meat, the size and shape of the cut, the temperature of the meat when cooking begins, and the degree of doneness desired. 3. De...
21 limited lifetime warranty model no.: jls400 (lux series 2 burner) jackson grills inc. Warrants the following materials and workmanship to be free of defects for as long as you own the grill. This covers the following components: main stainless steel outer hood, outer pedestal system, stainless st...
