Jackson Grills milan Assembly Instructions - page 2
2
Parts Included:
JA-60 - Granite tabletop
– Not shown (1)
JA-61 - Fire base shelf (1)
JA-62
– legs (4)
JA-63 - side panels (4)
Philip screw and nut combinations - for firebase shelf (8)
Philip screws - for legs (24)
Tools Needed:
S2 Phillips screwdriver
Crescent wrench OR 10mm wrench
Step One:
Screw in side panel to leg using the individual screws using a Philips
Screw Driver. Note: the face of the panel will hide screws from sight once
assembled.
Step Two:
Screw each leg to the black panels
to form a ‘U’ with the ridged ends facing
each other as seen to the right.
Step Three:
Fit the Fire base shelf in between the side panels. Use an S2 Phillips
screwdriver on the outer end and a crescent wrench or 10mm wrench to
tighten the screw and nuts together (below).