Important safety instruction when using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: z do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink ...
Accessories & content the following items are included in the package of jacob jensen tm telephone 10, with interchangeable speaker-cover/battery door and country adaptor (optional): 1. Telephone handset 2. Base station 3. Table stand 4. Screws and plugs 5. Power supply unit 6. Li-ion 3.7v 650mah ba...
Illustration diagram handset 1. Earpiece 2. Rear speaker 3. Lcd screen 4. Function keys 5. Dial number keys 6. Microphone 7. Changeable speaker-cover and battery compartment (user handset) 8. Handset charging contact base 9. Base charge contacts 10. Charge indicator 11. Page key.
Main feature list z 12 hours talk time z 7 days standby time z indoor range 50m z outdoor range 300m z low radiation z lcd type, 14 digit x 3 line + icons z flash selectable 80 ~ 800ms z caller id type 1 & 2 and dtmf z call log list z hands-free z speaker and ringer volume z 100 phonebook memory loc...
A. Installation and start-up............................................................................ 7 b. Display symbols and their indication ................................................ 12 c. Buttons and their functions................................................................... 13 ...
Congratulations with your new jacob jensen tm telephone. The telephone 10 is designed in denmark by jacob jensen, whose products have gained international recognition for their original, simple and classic design. It is a state of art device created with consideration of form and function. The telep...
A. Installation and start-up the cordless phone system can only work under constant power supply to the base station. It is advisable that another corded phone (works without main power supply) is connected to your phone system for emergency call purpose in case of power failure. Caution z use only ...
3. Plug the power supply into the main wall outlet and connect the other end to the red jack of the combo jack 4. Connect one end of the telephone line cord to the black jack of the combo jack; connect the other end of the telephone line cord to the country telephone plug adaptor (optional). 5. Conn...
2. Pull the combo cord downwards through the groove in order to let it out at the bottom and connect it to the combo jack. 3. Mount the base station by the enclosed screws and plugs for 6mm drill. A.3 fixing battery 1. On the handset, firmly slide and remove the handset back cover, install the recha...
Caution z risk of explosion if battery is replaced by an incorrect type. Use only the rtx battery model 60020437 , 3.7v 650mah li-ion rechargeable battery pack. Z dispose of used batteries according to the instructions. Z you must install the handset batteries before using the cordless handset. Z li...
Press and press 3 times to select display Æ press Æ press twice to select select lang. Press Æ press to select your desired language: english, deutch, francais, italiano, nederlands, espanol, dansk, svenska, türkse, norsk and press a.5 replacement of batteries depending on your usage, it is recommen...
B. Display symbols and their indication in standby/idle mode:.
C. Buttons and their functions before going through the following keypad functions, it is a good idea to understand multiple functions may be assigned to a single button in order to reduce buttons cluster. To some buttons, short and long pushes on one button give you different functions in different...
D. Preparation before use attention your dect phone is protected by pins (personal identification numbers). Never change the pins of your handset nor base unit unless you are familiar with electronics products and you have a real need to protect your phone by special pins. A forgotten pin could stop...
Phone in country with fsk caller id system as date/time information will be received automatically from caller id signal. For use in country with dtmf caller id system (or countries with fsk system where date/time is not sent from telephone operator), go through the following procedures to set date/...
Button to answer a call, even if a handset is on the base or charger. The default setting is “on”. Press the button to return to standby mode. D.6 sound enhancer you can adjust the audio tone of the earpiece. Your phone gives you four audio tone options: normal, bass, alto, or treble. 1. Press butto...
D.8 appointment the date and time must be set before you can access the calendar menu option. To set date and time, see the section of setting date and time. Your phone allows you to set 5 personalized date and time appointments. 1. Press the button to access the main menu. 2. Press / button to sele...
D.10 handset name you can select the type of information displayed during a call – the time or the call or the caller’s number (if available). The default setting is time. Key map:- Æ display – Æ talk displayÆ Æ select time/numberÆ 1. Press the button to access the main menu. 2. Press / button to se...
D.12 dial mode you can set your phone to use either tone or pulse dialing. The pre-set setting is tone dialing, where you will hear a tone beep each time you dial a number. Most modern exchanges and switchboards use tone dialing, so you should not need to change this setting. Only change it if your ...
Key map:- Æ base settings – Æ additionalÆ Æ prefix dialÆ Æ enter the number Æ Æ store 1. Press the button to access the main menu. 2. Press / button to select “base settings”. Press button. 3. Press / button to select “additional” . Press button. 4. Press / button to select “prefix dial” .Press butt...
E. Normal operation e.1 to make a new call 1. You can only make call with your handset. You cannot make call from your base unit. 2. On the handset, press the button and the when you hear the dial tone, enter the telephone number to be called. Entered number will be dialed automatically. After a sho...
Your handset is given an individual extension number. This individual extension number will be used when making intercom, call transfer & conference conversation. Extension number for handset(s) starts from 1 to 6. In a standard package, your phone comes with one handset and one base unit. E.4 to ma...
3. When the called handset answers, press the button to transfer the call. If the called handset does not answer, press the button to return to the external caller. Conference call you can hold a 3 way conversation (conference call) between your handset, an external caller and another internal hands...
F. Phone book there are 100 phone book memory banks built inside this dect phone (13 characters & 24 digits). You may store frequently used number into these memory banks. If more than one handset comes with your product package (refer to information on package), phone book memories are independent ...
Button once. Store to phbk is displayed. Press . Enter a name using the keypad and press button to confirm. If you enter a name that is already stored in the phonebook, you will be prompted to enter another name. 2. The number is displayed. To confirm and save the entry to the phonebook, press to co...
You will be asked to confirm permanent deletion of phone book record. To confirm, push again and the selected phone book record is deleted and a long beep will be heard. F.5 to change phone book memory 1. Use the / buttons to scroll until desired name is shown on the screen. 2. Push to confirm. 3. Y...
G. Caller identification memory (caller id) if caller id service is available from your service operator and you have subscribed to this service, telephone number of the caller will be shown on the screens of handset when there is an incoming call. In fsk caller id system, name of the caller and dat...
G.3 to store a number from caller id records to phone book memory you may store a number from the caller id record to a new phone book memory. Please refer to phone book section for details. G.4 to delete caller id memory you may delete either a single or all records in the caller id memory. On the ...
H. Personalizing your phone this dect phone is built with features to offer you personalized settings, such as ringing melody, ringing volume, key click and key lock. Referring to the description of menu button in previous section, all those personalized settings can be programmed via menu programmi...
3. Press / button to select the “external”, “internal”, “paging”, “alarm”, or “appointment” and press to confirm. 4. Press / button to select the melody you want. (you will hear a sample of each as you scroll through), then press to confirm your selection. 5. Press button to exit and return to stand...
I. Advanced operation special attention!!! Following sections are only for users who are familiar with electronics products. Failure in following steps correctly may stop your dect phone from normal operation. I.1 registering a new handset when you register a new handset to your base, you will be as...
The handset will automatically be allocated with the next available handset number. If registration is unsuccessful, the display will show “not registered” and you will need to follow the registration procedure again. I.2 deregistering a handset or a base if you have more than one handset registered...
I.4 selecting a base you can register the handset with up to 4 bases, e.G. One at work and one at home or one upstairs and one in the garage, and switch between them. Once your handset is registered with other bases, you can either specify the base you want to use or, select “automatic” for your han...
5. Press the button to exit and return to standby. For the handset: key map:- Æ add. Settings – Æ reset handsetÆ Æ select yesÆ 1. Press button to access the main menu. 2. Press / button to select “add. Settings” and press . 3. Press / button to display “reset handset” press to confirm. 4. Press / bu...
J. Reverting to factory default setting you may change all setting in your dect phone back to factory default setting. The only way to reset the handset or base is to go into the menu and choose “handset reset” or “base reset”. Please refer to the above section of “resetting your phone”. All program...
K. Maintenance 1. Do not expose this product to dust, strong sun light, humidity, high temperature, or mechanical shock. 2. Do not use corrosive or abrasive cleansers on this product. Keep the unit dust free by wiping it with a soft, dry cloth. 3. Do not disassemble this product, it contains no user...
L. Troibleshooting q1. My phone does not work! A1. Make sure if you have not locked your keypad of your handset. When keypad lock is turned on, a symbol will show on the screen. To remove the keypad lock, push and hold the button on your handset for approximately 2 seconds and release the button. A1...
Registered more than 1 base unit to your handset. Q3. The phone book memories do not work as expected! A3. Make sure you do not enter telephone number longer than limits mentioned in the phone book section. A3. If your phone is connected behind a pabx system, consult your system provider for informa...
M. Safety precautions when using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: z do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laun...
N. Warrantry and service warranty the warranty is the only warranty applicable to this product. All other warranties, express or implied (including all implied warranties of merchantability or fitness for a particular purpose) are hereby disclaimed. No verbal or written information given by bell xpr...
O. Fcc compliance your telephone equipment is approved for connection to the public switched telephone network and is in compliance with parts 15 and 68, fcc rules and regulations and the technical requirements for telephone terminal equipment published by acta. United states fc compliance this equi...
Consumer information: a) this equipment complies with part 68 of the fcc rules and the requirements adopted by the acta. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format us:t7hw400brtx3072. If requested, this number must be provide...
This is your guarantee of an authentic jacob jensen tm telephone. The individual number below matchs the one on your telephone. Individual no. …………………………………………………………………………………………….. Name: …………………………………………………………………………………………….. …………………………………………………………………………………………….. Address: …………………………………………………………………………...
