- DL manuals
- Jacobsen
- Lawn Mower
- Fairway 67978
- Parts & Maintenance Manual
Jacobsen Fairway 67978 Parts & Maintenance Manual - Notice
LDU 3
en-13
3.1.5 Maintenance Mode
Maintenance Mode is used by the superintendent to set
and adjust functional values for the mower. LCD displays
available in Maintenance Mode are, calibrate pedal, set
max mow speed, set travel speed, and set reverse
speed.
To enter Maintenance Mode, press black button (V) until
Traction Configuration screen is on the display. Press
and hold the black button until enter PIN screen is on
display. Use the joystick (H) to increase or decrease, and
the black button (J) to enter the digits for the Mechanic
Mode pin.
NOTE: The PIN for Superintendent Mode is 1234.
Operator must be on seat, parking brake switch
Engaged, mow switch OFF, and traction pedal in Neutral
to enter Maintenance Mode.
Calibrate Pedal: To calibrate the traction pedal, press
forward or backward on the joystick (H) until the calibrate
pedal screen is on the LCD display. With traction pedal in
Neutral, press the black button (J) to enter set mode.
Press traction pedal all the way in the forward direction
and check value displayed. Adjust forward pedal stop (S)
until value displayed is between 200 and 205, and press
black button (J).
Press traction pedal all the way in the reverse direction
and check value displayed. Adjust reverse pedal stop (T)
until value displayed is between 200 and 205, and press
the black button (J). Pedal calibration is complete.
Figure 3E
Mow Speed: To set the maximum mow speed, press
forward or backward on the joystick (H) until the set max
mow speed screen is on the LCD display. Press the black
button (J) to enter set mode. Pull back on the joystick to
raise or push forward on joystick to lowerthe maximum
mow speed to the desired speed. press the black button
to set speed.
Maximum mow speed is adjustable between 3 and 8
MPH (4.8 and 12.8 kph), in 0.5 MPH (0.8 kph)
increments. Factory default is 8 MPH.
Travel Speed: To set the maximum mow speed, press
forward or backward on the joystick (H) until the set max
travel speed screen is on the LCD display. Press the
black button (J) to enter set mode. Pull back on the
joystick to raise or push forward on joystick to lowerthe
maximum mow speed to the desired speed. Press the
black button to set speed.
Maximum travel speed is adjustable between 3 and
12 MPH (4.8 and 19.3 kph), in 0.5 MPH (0.8 kph)
increments. Factory default is 12 MPH.
Cruise Control: To enable or disable cruise control
function, press forward or backward on the joystick (H)
until one of the Cruise Control screens is on the LCD
display. Press the black button (J) to toggle display
between Enabled and Disabled.
Traction Mode: To set the traction mode, press forward
or backward on the joystick (H) until one of the traction
configuration setting screens is on the LCD display.
Press the black button (J) to toggle between traction
mode on and off.
Units Selection: To set the units displayed on the LDU,
press forward or backward on the joystick (H) until the
units setting screen is on the LCD display. Press the
black button (J) to toggle between English or Metric units.
Switch Status: Displays the current switch settings and
is used to diagnose switch problems. A status of 0
indicates the switch is in the OFF position. A status of 1
indicates the switch is in the ON position. Check the
wiring and operation of any switch that is not displaying
the correct status.
The Switches are broken up into three sets of numbers,
with a gap between each set.
The first set of numbers displays the status of the
traction pedal (0=Neutral), reel level switch, seat
switch, and backlap switch.
The second set of numbers displays the status of the
cruise control switch, brake switch, and starter
switch.
The third set of numbers displays the status of the
mow switch, horn switch, and head light switch.
NOTICE
Before accepting, and moving to the next screen, check
value listed on bottom of display. Maximum value that will
be accepted by the controller is 216, for both the forward
and reverse setting. If value is greater than 216, check
pedal for proper stop adjustment before continuing.
S
T
Summary of Fairway 67978
Page 1
When performance matters. ™ gb united kingdom es spain lightweight fairway mower with rops cortacésped ligero para calle de campo de golf con protección antivuelco (rops) 67978 – lf 550 ™ , kubota v1505-e3b, 5 gang 2wd 67979 – lf 550 ™ , kubota v1505-e3b, 5 gang 4wd 67981 – lf 570 ™ , kubota v1505-e...
Page 2
© copyright 2010, jacobsen, a textron company. “all rights reserved, including the right to reproduce this material or portions thereof in any form.” this manual contains adjustment, maintenance, troubleshooting instructions and parts list for your new jacobsen machine. This manual should be stored ...
Page 3: Table Of Contents
En-3 table of contents 1 safety 1.1 operating safety ............................................ 4 1.2 important safety notes ..................................5 2 specifications 2.1 product identification .....................................6 2.2 v1505-e3b engine ....................................
Page 4: Warning
1 safety en-4 1 safety 1.1 operating safety ______________________________________________________ 1. Safety is dependent upon the awareness, concern, and prudence of those who operate or service the equipment. Never allow minors to operate any equipment. 2. It is your responsibility to read this ma...
Page 5: Warning
Safety 1 en-5 1.2 important safety notes ________________________________________________ this safety alert symbol is used to alert you to potential hazards. Danger - indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Warning - indicates a pote...
Page 6
2 specifications en-6 2 specifications 2.1 product identification _________________________________________________ 67978 ........................... Lf 550, 2wd with rops, uses 5 in. (127 mm) diameter reel 67979 ........................... Lf 550, 4wd with rops, uses 5 in. (127 mm) diameter reel 67...
Page 7
Specifications 2 en-7 2.4 mower__________________________________________________________________ tires: front .........................26.5 x 14 - 12: (4 ply) rear (s/n 1651~2499)......18 x 9.5 - 8: (4 ply) rear (s/n 2500 and up)........20 x 10 - 8: (4 ply) pressure ....................10-12 psi (6...
Page 8
2 specifications en-8 2.8 declaration of conformity ____________________________________________ declaration of conformity prohlÁenÍ o shod overensstemmelseserklÆring conformiteitsverklaring vastavusdeklaratsioon vaatimustenmukaisuusvakuutus declaration de conformite konformitÄtserklÄrung megfelels...
Page 9
Specifications 2 en-9 uk notified body for 2000/14/ec [® ¯ 2000/14/° Úad certifikovaný podle smrnice ~. 2000/14/ec det britiske bemyndigede organ for 2001/14/ef engels adviesorgaan voor 2000/14/eg Ühendkuningriigi teavitatud asutus direktiivi 2000/14/eÜ mõistes direktiivin 2000/14/ey mukainen i...
Page 10: Caution
2 specifications en-10 2.9 accessories ___________________________________________________________ refer to the parts catalog and contact your area jacobsen dealer for a complete listing of accessories and attachments. Mower orange touch-up paint (12 oz. Spray) .............. 554598 canopy / sunshad...
Page 11: Caution
Ldu 3 en-11 3 ldu 3.1 lcd display unit (ldu) ___________________________________________________ the ldu displays current functional values for the operation of the mower, has indicator lights, and sounds audible warning alerts. The ldu operates in one of two modes, operator mode (default) and maint...
Page 12
3 ldu en-12 3.1.2 alarm codes _____________________ in addition to the lights on the ldu, there are eight screen displays that are used to alert the operator or mechanic of a problem the needs to be corrected. Figure 3b low oil pressure screen is shown, alarm sounds, reels stop and raise to full up ...
Page 13: Notice
Ldu 3 en-13 3.1.5 maintenance mode maintenance mode is used by the superintendent to set and adjust functional values for the mower. Lcd displays available in maintenance mode are, calibrate pedal, set max mow speed, set travel speed, and set reverse speed. To enter maintenance mode, press black but...
Page 14
3 ldu en-14 figure 3f engine temp 120f 50c pedal reverse 000 traction configuration. Calibrate reverse pedal movement. Calibrate traction pedal. Calibrate forward pedal movement. Press and hold black button. Enter pin. Change max mow speed. Mow speed setting. Mow speed set max mow speed enter pin? 1...
Page 15: Warning
Adjustments 4 en-15 4 adjustments 4.1 general ________________________________________________________________ 1. Adjustments and maintenance should always be performed by a qualified technician. If proper adjustment cannot be made, contact an authorized jacobsen dealer. 2. Replace, do not adjust, w...
Page 16: Caution
4 adjustments en-16 4.3 bedknife adjustment __________________________________________________ read section 4.2 before making the adjustment. Start adjustment at leading end of reel, followed by the trailing end. The leading end of the reel blade is that end which passes over the bedknife first duri...
Page 17
Adjustments 4 en-17 4.5 flash attach ™ __________________________________________________________ installing cutting units 1. Place each cutting unit in front of its respective lift arm. Raise lift arm and position cutting unit so that yoke (t) is in line with swivel housing (s). Carefully lower arm...
Page 18: Notice
4 adjustments en-18 4.7 belt ____________________________________________________________________ inspect and adjust new belt after first ten hours of operation. Adjust every 100 hours thereafter. Adjust alternator pulley so belt deflects 1/4 to 5/16 in. (6 to 8 mm) with a 20 lb. Push at midpoint be...
Page 19
Adjustments 4 en-19 4.9 steering toe-in _________________________________________________________ 1. Turn wheels to straight ahead position. 2. Loosen jam nuts (j) on both sides of tie rod (m). 3. Turn tie rod (m) to provide proper toe-in. Toe-in must not exceed +1/16 in. (1.5 mm) (k). Retighten jam...
Page 20
4 adjustments en-20 4.11 armrest pivot__________________________________________________________ 1. Tighten or loosen pivot plunger (w) as required so plunger button stops the armrest at both ends of armrest pivot slots, and plunger body does not contact armrest pivot. Do not use plunger to increase...
Page 21: Notice
Adjustments 4 en-21 4.12 torque specification ___________________________________________________ jacobsen uses grade 5 plated bolts as standard, unless otherwise noted. For tightening plated bolts, use the value given for lubricated. Notice all torque values included in these charts are approximate...
Page 22: Warning
5 maintenance en-22 5 maintenance 5.1 general ________________________________________________________________ 1. Adjustment and maintenance should always be performed by a qualified technician. If proper adjustments cannot be made, contact an authorized jacobsen dealer. 2. Inspect the equipment on ...
Page 23: Warning
Maintenance 5 en-23 5.4 air filter _______________________________________________________________ check the service indicator daily. If red band appears in the window (b) replace the element. Do not remove the element for inspection or cleaning. Unnecessary removal of the filter increases the risk ...
Page 24: Caution
5 maintenance en-24 5.7 battery ________________________________________________________________ make absolutely certain the ignition switch is off and the key has been removed before servicing the battery. Tighten cables securely to battery terminals and apply a light coat of silicone dielectric gr...
Page 25: Warning
Maintenance 5 en-25 5.10 muffler and exhaust ___________________________________________________ to protect from carbon monoxide poisoning, inspect the complete exhaust system regularly, and always replace a defective muffler. If you notice a change in the color or sound of the exhaust, stop the eng...
Page 26: Notice
5 maintenance en-26 5.13 hydraulic filters ______________________________________________________ the hydraulic system is protected by two 10 micron filters, a charge filter (b) and return line filter (a). Flow though the filters is monitored during operation. When pressure drop across the filters i...
Page 27: Warning
Maintenance 5 en-27 5.15 radiator _______________________________________________________________ check coolant level daily. Radiator should be full and recovery bottle should be up to the cold mark. Drain and refill annually. Remove the radiator cap, open the engine block drain, and the radiator dr...
Page 28: Warning
5 maintenance en-28 5.18 wheel mounting procedure ____________________________________________ 1. Remove dirt, grease, and oil from stud thread. Do not lubricate threads. 2. Position wheel on hub and inspect to insure full contact between mounting surface of wheel and hub or brake drum. 3. Finger ti...
Page 29: Warning
Maintenance 5 en-29 5.20 reel backlapping ______________________________________________________ check the reel and bedknife to determine if backlapping or grinding will restore the cutting edge. If wear or damage is beyond the point where the cutting edges can be corrected by the lapping process, t...
Page 30: Caution
5 maintenance en-30 5.21 storage ________________________________________________________________ general 1. Wash the mower thoroughly and lubricate. Repair and paint damaged or exposed metal. 2. Inspect the mower, tighten all hardware, and replace worn or damaged components. 3. Drain and refill rad...
Page 31
Troubleshooting 6 en-31 6 troubleshooting 6.1 general ________________________________________________________________ the troubleshooting chart below lists basic problems that may occur during start-up and operation. For more detailed information regarding the hydraulic and electrical systems conta...
Page 32: Warning
7 maintenance & lubrication charts en-32 7 maintenance & lubrication charts 7.1 general ________________________________________________________________ 1. Always clean grease fittings before and after lubrication. 2. Lubricate with grease that meets or exceeds nlgi grade 2 lb specifications. Apply ...
Page 33
Maintenance & lubrication charts 7 en-33 7.3 lubrication chart______________________________________________________ 2 3 3 5 6 7 7 8 8 9 10 12 12 11 13 11 13 14 14 14 4 15 1 9 grease fittings f1 - 50 hours (every week) 1 swivel housing 2 lift arm 3 lift cylinders 4 lift arm pivot 5 brake pedal pivot...
Page 34
8 parts catalog en-34 8 parts catalog 8.1 how to use the parts catalog _________________________________________ abbreviations n/s -not serviced separately, can only be obtained by ordering main component or kit. Ar - variable quantity or measurement is required to obtain correct adjustment. Symbols...
Page 35
Parts catalog 8 en-35 8.3 table of contents______________________________________________________ 1.1 .........Decals ..................................................................... 36 2.1 .........Hood ....................................................................... 38 3.1 .........Sea...
Page 36
Este manual contiene instrucciones de ajustes, mantenimiento, resolución de problemas y una lista de piezas de su nueva máquina jacobsen. Este manual debe con el equipo para poder consultarlo si es necesario. Antes de utilizar la máquina es necesario que usted y los operarios que usen la máquina lea...
Page 37: Índice
Es-3 Índice 1 seguridad 1.1 manipulación segura .......................................... 4 1.2 notas importantes sobre seguridad ................... 5 2 especificaciones 2.1 identificación del producto .................................. 6 2.2 motor v1505-e3b ..........................................
Page 38: Advertencia
1 seguridad es-4 1 seguridad 1.1 manipulaciÓn segura __________________________________________________ 1. La seguridad depende del conocimiento, la preocupación y la prudencia de aquellos que manipulen o pongan en servicio el equipo. Nunca se debe permitir a menores manipular ningún equipo. 2. Debe...
Page 39: Advertencia
Seguridad 1 es-5 1.2 notas importantes sobre seguridad ___________________________________ este símbolo de seguridad sirve para alertarle de posibles peligros. Peligro - indica una situación de inminente peligro que, de no ser evitada, provocarÁ la muerte o graves lesiones. Advertencia - indica una ...
Page 40
2 especificaciones es-6 2 especificaciones 2.1 identificaciÓn del producto___________________________________________ 67978 .............................. Lf 550, 2wd con rops, molinete de 5" (127 mm) de diámetro 67979 .............................. Lf 550, 4wd con rops, molinete de 5" (127 mm) de d...
Page 41
Especificaciones 2 es-7 2.4 cortacÉsped ___________________________________________________________ llantas: delanteras ................26,5 x 14 - 12: (4 capas) traseras (1651~2499)....18 x 9.5 - 8: (4 capas) traseras (2500~ )...........20 x 10 - 8: (4 capas) presión ......................69-83 kpa...
Page 42
2 especificaciones es-8 2.8 declaraciÓn de conformidad __________________________________________ declaration of conformity prohlÁenÍ o shod overensstemmelseserklÆring conformiteitsverklaring vastavusdeklaratsioon vaatimustenmukaisuusvakuutus declaration de conformite konformitÄtserklÄrung megfelel...
Page 43
Especificaciones 2 es-9 uk notified body for 2000/14/ec [® ¯ 2000/14/° Úad certifikovaný podle smrnice ~. 2000/14/ec det britiske bemyndigede organ for 2001/14/ef engels adviesorgaan voor 2000/14/eg Ühendkuningriigi teavitatud asutus direktiivi 2000/14/eÜ mõistes direktiivin 2000/14/ey mukainen...
Page 44: Precaución
2 especificaciones es-10 2.9 accesorios ____________________________________________________________ consultar el catálogo de piezas y ponerse en contacto con su distribuidor jacobsen para recibir una lista completa de accesorios y herramientas . Cortacésped pintura para retoques naranja (pulverizad...
Page 45: Precaución
Ldu 3 es-11 3 ldu 3.1 pantalla lcd (ldu)______________________________________________________ la pantalla lcd muestra los valores funcionales actuales para la utilización del cortacésped, tiene luces indicadoras y alertas de advertencia sonoras. La pantalla lcd tiene dos modos de funcionamiento: mo...
Page 46
3 ldu es-12 3.1.2 códigos de alarma ________________ además de las luces de la pantalla lcd, existen ocho pantallas utilizadas para alertar al operario o mecánico de un problema que debe solucionarse. Figura 3b se muestra la pantallapresión de aceite baja suena la alarma, se detiene el molinete y se...
Page 47: Aviso
Ldu 3 es-13 3.1.5 modo de mantenimiento ___________ el modo de mantenimiento es utilizado por el encargado para establecer y ajustar los valores funcionales del cortacésped. Las pantallas lcd disponibles en el modo de mantenimiento son las de calibrar el pedal, configurar la velocidad de sesgado máx...
Page 48
3 ldu es-14 figura 3f engine temp 120f 50c pedal reverse 000 configuración de tracción. Calibrar el movimiento del pedal marcha atrás. Calibrar el pedal de tracción. Calibrar el movimiento del pedal hacia delante. Mantenga pulsado el btón negro. Escriba el pin. Cambiar velocidad máxima de corte. Aju...
Page 49: Advertencia
Ajustes 4 es-15 4 ajustes 4.1 generalidades _________________________________________________________ 1. Los ajustes y las tareas de mantenimiento siempre deben ser acometidas por un técnico cualificado. Si no se puede realizar el ajuste deseado, póngase en con- tacto con un distribuidor jacobsen au...
Page 50: Precaución
4 ajustes es-16 4.3 ajuste de la cuchilla fija _____________________________________________ lea la sección 4.2 antes de realizar ningún ajuste. Comience el ajuste en el extremo de ataque del molinete y después en el extremo de cola. El extremo de ataque de las cuchillas de los molinetes es aquel qu...
Page 51
Ajustes 4 es-17 4.5 flash attach ___________________________________________________________ instalación de las unidades de corte 1. Colocar la unidad de corte frente a su respectivo brazo de elevación. Levantar el brazo de elevación y poner la unidad de corte para que el yugo (t) esté en línea con ...
Page 52: Aviso
4 ajustes es-18 4.7 correa_________________________________________________________________ revisar y ajustar la correa al cabo de las primeras diez horas de operación. Después ajustar cada 100 horas. Ajustar la polea del alternador para que la correa tenga una holgura de 6 - 8 mm, con 10 kg apretar...
Page 53
Ajustes 4 es-19 4.9 convergencia de la direcciÓn__________________________________________ 1. Poner las ruedas en dirección hacia delante. 2. Aflojar las contratuercas (j) a ambos lados en el tirante (m). 3. Girar el tirante (m) para que se pueda remolcar correctamente. El remolque no debe exceder 1...
Page 54
4 ajustes es-20 4.11 pivote del reposabrazos ______________________________________________ 1. Apriete o afloje el émbolo (w) lo necesario para que el pomo del émbolo detenga el reposabrazos en los dos extremos de las ranuras de pivote y que el cuerpo del émbolo no toque el pivote del reposabrazos. ...
Page 55: Aviso
Ajustes 4 es-21 4.12 especificaciones del par de torsiÓn ___________________________________ jacobsen utiliza pernos metalizados grado 5 de serie, a menos que se cite lo contrario. Para tensar pernos metalizados, utilice el valor dado para los lubricados. Aviso los valores de par de torsión de estas...
Page 56: Advertencia
5 mantenimiento es-22 5 mantenimiento 5.1 generalidades _________________________________________________________ 1. Los ajustes y las tareas de mantenimiento siempre deben ser acometidas por un técnico cualificado. Si no es posible realizar los ajustes deseados, póngase en contacto con un distribui...
Page 57: Advertencia
Mantenimiento 5 es-23 5.4 filtro de aire __________________________________________________________ compruebe el indicador de mantenimiento diariamente. Si en la ventana (b) aparece la banda roja reemplace el filtro. No extraiga el filtro para inspeccionarlo o limpiarlo. Si se extrae innecesariament...
Page 58: Precaución
5 mantenimiento es-24 5.7 baterÍa_________________________________________________________________ esté absolutamente seguro de que el interruptor de encendido esté apagado y que se haya retirado la llave de contacto antes de poner en servicio la batería. Apriete los cables a los terminales de la ba...
Page 59: Advertencia
Mantenimiento 5 es-25 5.10 escape y silenciador __________________________________________________ para protegerse del monóxido de carbono, inspeccione todo el sistema de escape regularmente y sustituya siempre el silenciador si está dañado. Si advierte un cambio de color y de sonido del escape, par...
Page 60: Aviso
5 mantenimiento es-26 5.13 filtros hidrÁulicos ____________________________________________________ el sistema hidráulico está protegido por dos filtros de 10 micrones; un filtro de carga (b) y un filtro del manguito de retorno (a). El caudal por los filtros está controlado durante la operación. Cua...
Page 61: Advertencia
Mantenimiento 5 es-27 5.15 radiador _______________________________________________________________ revisar el nivel del refrigerante diariamente. El radiador deberá estar lleno y la botella de recuperación hasta la marca frío. Vaciar y rellenar anualmente. Quitar la tapa del radiador, abrir el tapó...
Page 62: Advertencia
5 mantenimiento es-28 5.18 montaje de las ruedas_________________________________________________ 1. Limpie la suciedad, la grasa y el aceite de la rosca de los pernos sin cabeza. No lubrique las roscas. 2. Coloque la rueda en el cubo y preste atención para que la superficie de la rueda esté totalme...
Page 63: Advertencia
Mantenimiento 5 es-29 5.20 esmerilado del molinete _______________________________________________ revisar el molinete y la cuchilla fija para determinar si el esmerilado o afilado restauran el filo. Si el desgaste o daño es superior al punto donde el filo se puede corregir por el proceso de esmeril...
Page 64: Precaución
5 mantenimiento es-30 5.21 almacenamiento _______________________________________________________ generalidades 1. Lave el cortacésped a fondo y lubríquelo. Repare y pinte el metal dañado o desnudo. 2. Inspeccione el cortacésped, apriete todos los elementos, sustituya los componentes desgastados o d...
Page 65
ResoluciÓn de problemas 6 es-31 6 resoluciÓn de problemas 6.1 generalidades _________________________________________________________ en el siguiente cuadro se enumeran los problemas más comunes que pueden ocurrir durante el arranque y funcionamiento. Para más información detallada acerca de los sis...
Page 66: Advertencia
7 cuadros de mantenimiento y lubricaciÓn es-32 7 cuadros de mantenimiento y lubricaciÓn 7.1 generalidades _________________________________________________________ 1. Limpie siempre el accesorio engrasador antes y después de lubricar. 2. Use grasa que cumpla o supere las especificaciones nlgi grado ...
Page 67
Cuadros de mantenimiento y lubricaciÓn 7 es-33 7.3 cuadro de lubricaciÓn _________________________________________________ 2 3 3 5 6 7 7 8 8 9 10 12 12 11 13 11 13 14 14 14 4 15 1 9 accesorios de engrase f1 - 50 horas (cada semana) 1 bastidor giratorio 2 brazo elevación 3 cilindros elevación 4 pivot...
Page 68
8 catÁlogo de piezas es-34 8 catÁlogo de piezas 8.1 cÓmo usar el catÁlogo de piezas ______________________________________ abreviaciones n/s - no revisado por separado, sólo se puede obtener pidiendo el componente principal o el juego. Ar - es necesaria cantidad o medida variable para obtener el aju...
Page 69
CatÁlogo de piezas 8 es-35.
Page 70: Lf 550
36 2 2 6 3 4 5 5 6 7 10 12 11 15 3 8 14 14 13 15 16 16 17 17 17 1 1 3 9 b io d e g radable flu id manufactured under one or more of the following u.S. Patents: xxxxxx xxxxxx xxxxxx xxxxxx 4181865 ® a textron company 838363 4199140 lf 550 lf 550 4wd lf 550 4wd turbo lf 570 lf 570 4wd lf 570 4wd turbo...
Page 71: 105
37 > change from previous revision 7 4 3 10 13 9 11 3008683 3008522 3008521 3008682 105 db l w a ! 4131663 12 4181864 4181862 4181861 lf 570 item part no. Qty. Description serial numbers/notes 1 4111408 2 decal, bio fluid 2 3008930 1 decal, flash attach 3 3008683 2 decal, backlap located on front ax...
Page 72: Lf 550
38 1 2 17 22 5 4 26 27 9 3 18 15 17 20 22 16 16 19 29 29 23 24 7 16 28 10 11 12 12 14 21 25 8 16 15 6 lf 550 2.1 hood serial no. All lf34-1.
Page 73: Lf 570
39 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4210824 1 hood assembly includes items 8 on illustration 1.1 2 4218040 1 • foam, front 3 4218042 1 • foam, right side 4 4218043 1 • foam, left side 5 4218041 1 • foam, top 6 4130360 ar • seal, trim 5 foot...
Page 74: Lf 550
40 8 3 19 5 6 9 4 30 16 24 25 2 6 9 22 23 18 6 9 10 10 10 1 20 34 21 12 7 14 15 13 11 26 27 17 8 28 29 29 8 33 31 32 lf 550 3.1 seat pan harita seat serial no. All.
Page 75: Lf 570
41 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 1004279 1 floor pan 2 4218500 1 seat pan 3 4217621 1 support, seat 4 4210561 1 adjuster, double latching 5 4222229 1 plug, 2 x 2” tube 6 400258 9 screw, 3/8-16 x 3/4” hex head 7 441602 4 carriage bolt, 5/...
Page 76: Lf 550
42 1 2 3 4 5 6 7 8 9 10 11 12 13 lf 550 4.1 armrest support serial no. All.
Page 77: Lf 570
43 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 ref 1 armrest assembly 2 4188380 1 support, upper armrest 3 4189843 4 screw, m6-1 x 65 mm hex head 4 4188484 4 flange, m6 body fastener 5 473211 4 spacer, black neoprene 6 4209240 1 pivot, lower armrest s...
Page 78: Lf 550
44 1 2 3 4 5 6 7 8 9 10 11 12 36 36 37 38 38 13 14 15 16 17 17 18 19 ldu joystick mow light horn horn l reel r reel c reel key switches accessory outlet 20 35 21 22 23 23 39 24 25 26 26 27 28 29 30 31 32 33 33 34 34 lf 550 5.1 armrest serial no. All.
Page 79: Lf 570
45 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4233480 1 armrest, upper 2 4168560 1 armrest, lower 3 4189540 8 screw, m4-0.7 x 20 mm torx 4 4188480 8 flange, m4 x 4 mm body 5 4188482 8 spacer, black neoprene 6 4219300 1 harness, ldu 7 843942 1 • socke...
Page 80: Lf 550
46 1 2 3 4 5 6 8 9 9 10 10 10 11 11 12 13 14 15 16 17 18 19 7 lf 550 6.1 traction pedal serial no. All.
Page 81: Lf 570
47 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4218260 1 pedal, traction reference u3, see 47.1 2 4235560 1 plate, pedal support 3 400128 4 screw, 1/4-20 x 3-1/2” hex head 4 453023 4 flat washer, 1/4 5 4233220 4 spacer 6 446130 4 lockwasher, 1/4 heavy...
Page 82: Lf 550
48 4 5 6 7 8 9 13 16 17 20 22 1 2 3 18 10 30 10 23 23 20 16 17 24 25 26 26 21 14 11 12 15 26 26 27 27 28 29 19 25 10 22 lf 550 7.1 frame and front axle serial no. All.
Page 83: Lf 570
49 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4236060 2 tire, 26.5 x 14-12 4 ply 2 4210442 2 rim, 12 x 10.5 3 360111 2 valve, inflation 4 4209440 2 wheel motor see 42.1 4222844 1 • seal kit 4222842 1 • shaft, module 4222843 1 • brake module 5 4222840...
Page 84: Lf 550
50 1 2 3 4 4 5 5 6 6 lf 550 8.1 rops serial no. All.
Page 85: Lf 570
51 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4218320 1 rops 2 5000465 8 screw, 1/2-13 x 1-1/4” hex gr 8 3 446154 8 lockwasher, 1/2 heavy 4 4193182 1 seat belt kit 5 400370 2 screw, 7/16-20 x 1” hex head 6 446148 2 lockwasher, 7/16 heavy.
Page 86: Lf 550
52 1 2 3 4 5 6 7 8 9 10 12 11 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 9 9 9 4 16 15 17 15 20 15 25 29 31 31 26 32 34 35 36 37 lf 550 9.1 2wd steering 2wd units only serial no. 67978 - all serial no. 67981 - all.
Page 87: Lf 570
53 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4219320 2 tire, 18 x 9.5-8 treaded 4-ply s/n 1651 ~ 2499 for all models 1 4236061 2 tire, 20 x 10-8 treaded 4-ply s/n 2500 and up for all models 2 4236021 2 rim 3 360111 2 inflation valve 4 361648 6 washe...
Page 88: Lf 550
54 15 13 9 8 20 6 14 11 11 38 12 9 17 16 10 17 15 30 36 34 1 26 7 4 9 9 4 5 4 31 30 3 2 24 33 32 19 22 22 23 21 21 18 29 35 37 25 16 20 28 27 39 39 40 40 41 41 lf 550 10.1 4wd steering 4wd units only serial no. 67979 - all serial no. 67980 - all serial no. 67982 - all serial no. 67983 - all lf34-8.
Page 89: Lf 570
55 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4219320 2 tire, 18 x 9.5-8 treaded 4-ply s/n 1651 ~ 2499 for all models 1 4236061 2 tire, 20 x 10-8 treaded 4-ply s/n 2500 and up for all models 2 4236021 2 rim 3 360111 2 inflation valve 4 361648 6 washe...
Page 90: Lf 550
56 1 2 3 4 5 6 7 7 8 9 10 12 11 13 25 14 15 16 17 18 19 20 21 22 23 24 11 11 26 27 28 29 30 lf 550 11.1 tilt steering serial no. All.
Page 91: Lf 570
57 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 5002918 1 actuator, gas spring 2 5002919 1 cable, actuator 3 4217626 1 tower, steering 4 4212981 1 valve, steering 4197940 1 • seal kit 339908 2 • o-ring, -4 orfs 339909 3 • o-ring, -6 orfs 5 4211400 4 sp...
Page 92: Lf 550
58 1 2 3 4 5 6 7 7 8 8 9 10 11 11 12 12 12 13 14 15 16 17 18 19 22 21 20 lf 550 12.1 throttle lever serial no. All.
Page 93: Lf 570
59 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4215661 1 bracket, throttle support includes item 8 2 434003 2 screw, 5/16-18 x 1” socket head 3 453009 2 flat washer, 5/16 4 446136 2 lockwasher, 5/16 heavy 5 443106 2 nut, 5/16-18 hex 6 4217280 1 handle...
Page 94: Lf 550
60 2 3 5 8 9 10 12 13 14 16 18 19 21 22 24 28 30 23 4 17 26 26 1 11 22 22 28 30 26 24 20 28 26 30 6 7 11 27 31 25 32 29 33 15 28 26 30 lf 550 13.1 radiator and air cleaner non-turbo units serial no. 67978 - all serial no. 67979 - all serial no. 67981 - all serial no. 67982 - all.
Page 95: Lf 570
61 lf 570 item part no. Qty. Description serial numbers/notes 1 3001965 1 air filter 5000919 1 • air cleaner element 5000920 1 • cover 5000921 1 • valve 2 3001388 1 bracket, air filter 3 4138381 1 shroud, rear frame 4 4121722 1 bracket, air cleaner mounting 5 4218562 1 shroud, radiator fan includes ...
Page 96: Lf 550
62 2 3 5 6 7 8 9 10 11 13 14 16 18 19 21 22 23 27 31 34 4 17 15 26 25 35 26 32 32 1 11 22 12 22 22 24 20 29 33 37 28 26 36 30 28 26 30 28 26 30 28 30 lf 550 14.1 radiator and air cleaner turbo units serial no. 67980 - all serial no. 67983 - all.
Page 97: Lf 570
63 lf 570 item part no. Qty. Description serial numbers/notes 1 3001965 1 air filter 5000919 1 • air cleaner element 5000920 1 • cover 5000921 1 • valve 2 3001388 1 bracket, air filter 3 4119873 1 shroud, rear frame 4 4121722 1 bracket, air cleaner mounting 5 4234763 1 shroud, radiator fan includes ...
Page 98: Lf 550
64 1 2 3 4 5 6 7 8 8 9 9 10 11 12 13 14 15 lf 550 15.1 remote oil cooler turbo units only serial no. 67980 - all serial no. 67983 - all.
Page 99: Lf 570
65 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4162421 1 engine, kubota v1505-t-e3b 2 4177262 1 • oil filter 3 4233320 1 adapter, oil cooler 4 n/s 1 • center post 5 4237531 1 fitting, 3/8 npt x -8 orfs straight 339910 1 • o-ring, -8 orfs 6 4137099 1 f...
Page 100: Lf 550
66 ref. Negative battery cable 1 2 3 14 26 18 19 20 21 22 23 24 25 27 28 29 30 31 24 24 6 7 10 12 13 21 16 17 4/5 16 17 8 9 11 22 30 2 20 a a 32 33 34 turbo engine lf 550 16.1 engine assembly and mounting serial no. All.
Page 101: Lf 570
67 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4162400 1 engine, kubota v1505-e3b lf 550, lf 570 1 4162421 1 engine, kubota v1505-t-e3b lf 550 turbo, lf 570 turbo 2 366879 3 isolator, engine 3 1003239 1 front engine mount 4 1003260 1 left side engine ...
Page 102: Lf 550
68 3 5 6 7 8 9 13 1 4 4 12 2 10 11 16 14 15 17 18 19 20 21 22 23 20 lf 550 17.1 engine exhaust and pump serial no. All.
Page 103: Lf 570
69 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4209500 1 pump, traction 5003034 1 • seal kit 5003433 1 • shaft seal kit 5003434 2 • system relief kit 4224120 1 • charge relief kit 4224121 1 • o-ring, charge relief 4224140 1 • edc kit 4224180 1 • o-rin...
Page 104: Lf 550
70 a a b b connect to engine fuel injector overflow. Connect to engine fuel pump 1 2 3 4 5 6 7 9 10 8 12 11 13 14 15 16 17 18 19 19 20 21 22 19 18 18 18 13 15 17 18 18 23 24 25 26 27 28 lf 550 18.1 fuel and hydraulic tanks serial no. All.
Page 105: Lf 570
71 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 132647 1 valve, shut off 2 3001279 1 switch, float reference sw-9, see 47.1 3 3002397 1 plug, magnetic 339899 1 • o-ring 4 4237504 1 fuel tank 5 3005871 1 hydraulic tank 6 3005872 1 shell, tank cover 7 30...
Page 106: Lf 550
72 1 2 3 4 4 5 7 6 8 5 12 8 6 6 15 6 7 7 7 9 10 11 5 14 13 lf 550 19.1 hydraulic components serial no. All.
Page 107: Lf 570
73 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 123015 1 charge filter see 24.1 and 27.1 556417 1 • head 2811255 1 • oil filter cartridge 556419 1 • charge pressure switch reference sw-1, see 47.1 2 132704 1 return filter see 25.1 557772 1 • oil filter...
Page 108: Lf 550
74 1 2 3 4 5 12 14 13 5 5 6 6 6 6 6 6 7 7 8 9 10 11 lf 550 20.1 pump hydraulics serial no. All.
Page 109: Lf 570
75 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 3005871 1 tank, hydraulic see 18.1 2 365959 1 strainer, tank 2812075 1 • o-ring 3 340090 1 fitting, 24-24 90° 339915 1 • o-ring, -24 orfs 339903 1 • o-ring, -24 orb 4 1003992 1 tube, gear pump suction 5 4...
Page 110: Lf 550
76 1 2 2 3 4 4 5 5 5 5 6 6 7 17 16 7 8 9 9 10 10 11 12 13 14 14 15 ▲ ▲ ▲ 17 18 lf 550 21.1 2wd traction hydraulics serial no. 67978 - all serial no. 67981 - all.
Page 111: Lf 570
77 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4209500 1 pump, traction see 17.1 2 339999 2 fitting, 16-16 straight 339913 1 • o-ring, -16 orfs 339901 1 • o-ring, -16 orb 3 4213140 1 tube, forward traction traction pump port a 339913 2 • o-ring, -16 o...
Page 112: Lf 550
78 1 2 2 3 4 4 5 5 5 5 6 6 7 7 8 9 9 10 10 11 12 13 14 16 15 18 17 ▲ ▲ ▲ lf 550 22.1 front 4wd traction hydraulics serial no. 67979 - all serial no. 67980 - all serial no. 67982 - all serial no. 67983 - all.
Page 113: Lf 570
79 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4209500 1 pump, traction see 17.1 2 339999 2 fitting, 16-16 straight 339913 1 • o-ring, -16 orfs 339901 1 • o-ring, -16 orb 3 4213140 1 tube, forward traction traction pump port a 339913 2 • o-ring, -16 o...
Page 114: Lf 550
80 1 2 3 3 4 4 4 5 6 7 7 7 7 8 9 10 11 12 13 14 15 15 16 16 17 18 19 19 lf 550 23.1 rear 4wd traction hydraulics serial no. 67979 - all serial no. 67980 - all serial no. 67982 - all serial no. 67983 - all.
Page 115: Lf 570
81 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4209283 1 tube, left 4wd forward traction 4wd valve port lf, see 22.1 2 4210280 1 tube, right 4wd forward traction 4wd valve port rf, see 22.1 3 339994 2 fitting, 12-12 straight 339912 1 • o-ring, -12 orf...
Page 116: Lf 550
82 1 2 3 4 5 6 6 7 7 8 9 10 11 12 13 14 15 16 17 17 18 18 19 20 21 lf 550 24.1 charge and brake release hydraulics serial no. All.
Page 117: Lf 570
83 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 123015 1 charge filter see 19.1 556417 1 • filter head 2811255 1 • filter element cartridge 556419 1 • 25 psi charge pressure switch 2 340011 1 fitting, 10-16 straight 339911 1 • o-ring, -10 orfs 339901 1...
Page 118: Lf 550
84 1 2 2 3 4 5 6 7 8 9 10 11 11 12 13 lf 550 25.1 return hydraulics serial no. All.
Page 119: Lf 570
85 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4217400 1 tube, return filter see 26.1 and 29.1 for connecting tubes 339912 1 • o-ring, -12 orfs 339913 1 • o-ring, -16 orfs 2 339999 2 fitting, 16-16 straight 339913 1 • o-ring, -16 orfs 339901 1 • o-rin...
Page 120: Lf 550
86 1 10 3 4 5 6 7 7 8 9 2 2 31 31 9 9 10 10 10 10 10 10 10 11 11 11 12 13 13 14 15 16 17 18 19 19 19 20 25 20 21 22 23 24 reel motor tubes 26 27 28 29 ◆ ◆ ◆ ◆ lf 550 26.1 front reel hydraulics serial no. All.
Page 121: Lf 570
87 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 1002154 1 gear pump see 17.1 2 340292 4 union, -10 orfs x -10 orfs straight 339911 2 • o-ring, -10 orfs 3 4244263 1 hose, pump to front reel valve 4 339990 1 fitting, -10 orfs x -12 orb straight 339911 1 ...
Page 122: Lf 550
88 1 2 3 4 5 5 6 7 8 8 8 9 10 10 10 10 11 11 11 11 12 12 13 14 15 16 17 18 18 19 19 20 21 22 reel motor tubes 23 24 25 26 ◆ ◆ ◆ lf 550 27.1 rear reel hydraulics serial no. All.
Page 123: Lf 570
89 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 1002154 1 gear pump see 17.1 2 340033 1 fitting, -10 orfs x -10 orb 45° 339911 1 • o-ring, -10 orfs 339899 1 • o-ring, -10 orb 3 4244264 1 tube, pump to rear reel valve 4 340071 1 fitting, -10 orfs x -12 ...
Page 124: Lf 550
90 1 2 3 4 4 20 21 5 6 6 7 7 8 9 10 11 11 11 11 11 12 12 13 14 15 16 17 17 18 18 19 lf 550 28.1 front lift hydraulics serial no. All.
Page 125: Lf 570
91 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4212981 1 steering valve see 11.1 2 1003339 1 hose, steering valve to lift valve steering valve port t, lift valve port t 3 1003340 1 hose, steering valve to lift valve steering valve port e, lift valve p...
Page 126: Lf 550
92 1 2 3 4 4 4 22 4 5 6 6 7 8 9 10 10 11 11 12 13 14 15 16 17 18 19 20 lf 550 29.1 rear lift hydraulics serial no. All.
Page 127: Lf 570
93 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4195081 1 lift valve see 19.1 2 337317 1 fitting, -6 orb one way restrictor lift valve port 4 3 353190 1 plate, 0.026” orifice 4 339979 4 fitting, 6-6 straight lift valve port 6, cylinders 339909 1 • o-ri...
Page 128: Lf 550
94 a a attaches to left side engine mount attaches to stud welded on frame 1 2 3 4 5 6 7 8 8 9 23 22 10 11 12 12 13 14 14 15 15 16 17 18 19 20 21 lf 550 30.1 steering hydraulics serial no. All.
Page 129: Lf 570
95 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 1002154 1 gear pump see 17.1 2 340274 1 tee, 8-10-8 straight run 339910 2 • o-ring, -8 orfs 339898 1 • o-ring, -10 orb 3 364945 1 fitting, -8 orfs diagnostic 4 363030 1 dust cover 5 1003334 1 hose, pump t...
Page 130: Lf 550
96 rear lift tubes rear lift tubes reel motor tubes reel motor tubes reel motor tubes steering tubes steering tubes pump intake tube 1 1 2 2 3 19 3 4 4 18 5 6 8 ★ 8 8 9 9 ★ attaches to weld stud on frame. 10 9 12 7 13 14 15 16 17 22 21 4 4wd tubes 14 11 brake valve tubes brake valve tube 14 20 ★ ree...
Page 131: Lf 570
97 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 400118 4 screw, 1/4-20 x 1” 2 3003110 5 clamp, double 5/8” tube see 26.1 and 27.1 3 366811 6 clamp, 3/8” tube see 26.1 and 27.1 4 444708 6 locknut, 1/4-20 center 5 400264 1 screw, 3/8-16 x 1-1/4” hex head...
Page 132: Lf 550
98 30 outside yokes only. 31 32 32 1 2 5 6 7 8 9 12 11 13 14 15 16 17 18 19 20 21 22 24 25 26 27 28 29 18 11 11 6 6 17 19 7 7 8 8 10 17 19 28 17 19 9 19 32 19 19 32 32 3 4 10 11 11 8 8 7 7 19 19 6 6 32 17 19 6 32 17 31 30 23 33 34 lf 550 32.1 lift arms serial no. All.
Page 133: Lf 570
99 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 4170623 1 left front lift arm 2 4170624 1 right front lift arm 3 4170626 1 left rear lift arm 4 4170627 1 right rear lift arm 5 4170625 1 center lift arm 6 3006539 10 • bushing 2 per lift arm 7 1002498 5 ...
Page 134: Lf 550
100 a b c d e f g h j k l m a - headlight b - lift arm limit switch c - fuel level sender/ instrument panel d - seat switch e - oil float switch f - glow plugs g - fuel solenoid h - charge filter switch j - engine oil pressure switch k - temperature sender l - 4wd valve (4wd only) m - reel valve 11 ...
Page 135: Lf 570
101 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 ------------ 1 tray, battery see 7.1 2 4122840 2 headlight 4123183 1 • bulb reference l-1 and l-2, see 47.1 3 4216680 1 controller reference u-6, see 47.1 4 5003282 2 • fuse, 20 amp reference f-1 & f-2, ...
Page 136: Lf 550
102 2 3 5 6 7 8 9 12 11 13 14 16 18 18 19 20 21 22 23 24 27 28 29 31 33 4 17 15 25 26 34 32 1 35 36 37 10 30 2 3 4181863 4182520 manufactured under one or more of the following u.S. Patents: xxxxxx xxxxxx lf 550 34.1 five inch reel assembly lf 550 serial no. 67984 - all serial no. 67985 - all.
Page 137: Lf 570
103 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 5003087 1 frame, reel 2 4182520 2 • decal, danger 3 4181863 1 • decal, warning 4 5003053 1 7 blade left hand reel used on 67984 4 5003054 1 7 blade right hand reel used on 67985 5 1004786 1 bearing housi...
Page 138: Lf 550
104 2 3 5 6 7 8 9 10 12 11 13 14 16 18 19 20 21/22 23 24 4 17 15 25 26/27 1 12 8 19 lf 550 35.1 five inch reel assembly lf 550 serial no. 67984 - all serial no. 67985 - all.
Page 139: Lf 570
105 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 1000770 1 rear roller see 39.1 2 1002224 2 zerk bolt 3 446142 2 lockwasher, 3/8 heavy 4 400264 2 screw, 3/8-16 x 1-1/4” hex head 5 453011 2 flat washer, 3/8 6 345510 2 spacer 7 2000065 1 casting, counter...
Page 140: Lf 550
106 2 3 3 5 6 7 8 9 10 12 11 13 14 16 18 19 22 20 21 40 23 24 27 28 29 30 31 33 4 17 15 25 26 34 37 38 39 35 36 32 1 18 18 34 27 38 39 33 35 36 26 14 4182520 lf 550 36.1 seven inch reel assembly lf 570 serial no. 67986 - all serial no. 67987 - all.
Page 141: Lf 570
107 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 2810472 1 reel, 11 blade used on 67986 1 2810471 1 reel, 9 blade used on 67987 2 5002609 1 frame, 7” reel 3 4182520 2 • decal, danger 4 2811399 1 bedknife backing assembly 455066 ar • shim 5 503460 1 • b...
Page 142: Lf 550
108 3 5 7 12 13 18 19 20 21 22 4 17 25 2 1 6 8 9 10 11 13 14 16 23 24 27 28 29 26 30 lf 550 37.1 seven inch reel assembly lf 570 serial no. 67986 - all serial no. 67987 - all.
Page 143: Lf 570
109 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 445525 2 palnut, 1/4 2 445795 2 nut, 5/16-18 spiralock flange 3 1002226 2 zerk bolt 4 3004738 2 front roller adjuster 5 3005209 1 shield 6 3009280 1 scraper, 22” rear roller 7 3009281 1 spring, 22” rear ...
Page 144: Lf 550
110 > change from previous revision 2 3 5 6 7 8 9 10 11 4 1 lf 550 38.1 down pressure spring serial no. All item part no. Qty. Description serial numbers/notes 1 461397 1 roll pin, 1/4 x 1-1/4” 2 453017 1 flat washer, 1/2 3 400268 1 screw, 3/8-16 x 1-3/4” hex head 4 3008593 1 tube, down pressure 5 4...
Page 145: Lf 570
111 > change from previous revision lf 570 item part no. Qty. Description serial numbers/notes 1 3001654 1 shaft, roller 2 3001655 1 tube, roller 3 3001656 2 seal, grease 4 5000625 2 bearing, cup and cone 5 3000983 2 seal, grease 6 3001762 2 sleeve, wear 7 445801 2 nut, 5/8-18 hex jam lock 8 3000698...
Page 146: Lf 550
112 > change from previous revision 1 2 3 4 5 / 8 6 7 lf 550 40.1 brake valve part number 4211880 serial no. All item part no. Qty. Description serial numbers/notes 1 4216690 1 direction control valve, manual 4219540 1 • seal kit 2 4237106 1 • handle kit 3 4216691 1 check valve 4219420 1 • seal kit ...
Page 147: Lf 570
113 > change from previous revision 1 2 10 3 4 5 5 6 6 7 8 9 lf 570 41.1 reel valve part number 4195041 serial no. All item part no. Qty. Description serial numbers/notes 1 5003080 1 flow control 5003579 1 • flow control seal kit 2 4136815 1 solenoid valve 339909 4 • o-ring 3 4135552 1 coil referenc...
Page 148: Lf 550
114 > change from previous revision 1 2 3 lf 550 42.1 front wheel motor part number 4209440 serial no. All item part no. Qty. Description serial numbers/notes 1 4222840 1 parallel key 2 4222841 1 nut, 1-20 slotted hex 3 4222842 1 shaft module 4 4222843 1 brake module not shown 4222844 1 seal kit.
Page 149: Lf 570
115 > change from previous revision 1 2 3 4 5 6 7 8 2 2 2 9 10 11 lf 570 43.1 rear wheel motor part number 4178560 serial no. All item part no. Qty. Description serial numbers/notes 1 1 seal exclusion 2 4 seal, 3” i.D. 3 1 back up ring 4 1 shaft seal 5 5003384 1 shaft and bearing kit 6 554780 1 key ...
Page 150: Lf 550
116 > change from previous revision p t t g 10 9 8 1 2 3 4 6 front top rear 2 / 7 3 4 4 5 6 6 8 1 lf 550 44.1 lift valve part number 4195081 serial no. All item part no. Qty. Description serial numbers/notes 1 5003144 1 relief valve 5003579 1 • relief valve seal kit 2 5001355 3 pilot operated check ...
Page 151: Lf 570
117 > change from previous revision 1 2 3 4 4 5 5 item part no. Qty. Description serial numbers/notes 1 4216685 1 plug, orifice 2 4216681 2 check valve 4219520 1 • seal kit 3 4216686 1 sequence valve 4219540 1 • seal kit 4 4216689 2 relief valve 4219520 1 • seal kit 5 4216684 6 plug, -6 tapered lf 5...
Page 152: Lf 550
118 > change from previous revision 1 2 3 lf 550 43.1 reel motor part number 2822503 (five inch reel) serial no. All item part no. Qty. Description serial numbers/notes 1 845279 1 o-ring 2 5003140 2 relief valve 3 5003688 1 face plate 5003589 1 seal kit.
Page 153: Lf 570
119 > change from previous revision lf 570 44.1 reel motor part number 1002620 (seven inch reel) serial no. All item part no. Qty. Description serial numbers/notes 1 3006021 1 o-ring 2 5003140 2 relief valve 3 5003485 1 face plate 4 5003031 1 seal kit not shown 5 4102440 1 shaft, output 1 2 3 used o...
Page 154: Lf 550
120 a b p g t .5 ci .5 ci .5 ci gear pump rear reel valve front reel valve 1167 psi 1167 psi lr reel motor rr reel motor * * 1167 psi lf reel motor * 1167 psi c reel motor * 1167 psi rf reel motor * reel diag. Reel diag. Strg. Diag. 10 micron 25 psi crack bypass 25 psi crack bypass 100 mesh screen r...
Page 155: Lf 570
121 1 2 3 4 6 8 9 10 g chg st br drn p t t left front cylinder center cylinder left rear cylinder right rear cylinder right front cylinder 450 psi .055 .026 .040 .040 .040 .040 .040 .040 .040 .040 25 psi 25 psi 10 micron charge filter front wheel motors lift valve strg. Diag a b c d e f g h 19.23 ci...
Page 156: Lf 550
122 a b p g t .5 ci .5 ci .5 ci 3625 psi 3625 psi 285 psi 2.81 ci tow valve reverse diag. Forward diag 3000 rpm a b traction pump gear pump rear reel valve front reel valve 1167 psi 1167 psi lr reel motor rr reel motor * * 1167 psi lf reel motor * 1167 psi c reel motor * 1167 psi rf reel motor * ree...
Page 157: Lf 570
123 1 2 3 4 6 8 9 10 g chg st br lf rf rev drn lrr lrf rrr rrf drn p t t left front cylinder center cylinder left rear cylinder right rear cylinder right front cylinder 450 psi .040 .040 .040 .040 .040 .040 .040 .040 .040 25 psi 25 psi 10 micron charge filter left front wheel motor right front wheel...
Page 158: Lf 3400 / 3800
124 30 86 85 87 87a 30 86 85 87 87a j1-1 j1-2 spare input j1-3 j1-4 j1-5 j1-6 program select #2 j1-7 j1-8 j1-9 j1-10 backlap hydraulic oil level program select #1 engine oil pressure j1-11 program select #3 j1-12 j2-1 j2-2 j2-3 j2-4 j2-5 j2-6 j2-7 j2-8 j2-9 j2-10 j2-11 j2-12 seat can low can high ch...
Page 159: Lf 3400 / 3800
125 2 3 2 3 2 3 2 3 j8-1 j8-2 j8-3 j8-4 j8-5 j8-6 p3-1 p3-2 430- rd 445- rd rd - 431 436 - gy/rd 435 - gy/rd 444 - wh 442 - y e 441 - gn 434 - bk rd - 50e rd - 80b y e - 410b gn - 400b rd - 80b rd - 50e wh - 100i ye - 410c gn - 400c 410a - ye 400a - gn bk - 20e 465 - bk 438 - wh 45 9 - rd 453 - rd 4...
Page 160: Lf 3400 / 3800
126 lf 3400 / 3800 item reference illustration part number description serial numbers/notes b1 see 33.1 n/s battery cb1 see 33.1 361439 50 amp circuit breaker (alternator) f1 see 5.1 836892 10 amp fuse (power outlet) f2 not shown 836892 10 amp fuse (deluxe seat) k1 see 33.1 4193880 glow plug relay k...
Page 161: Fluids And Compounds
Fluids and compounds * refer to the operator’s manual or the parts & maintenance manual for the correct hydraulic oil requirements for your machine. Jacobsen offers a high usage parts catalog illustrating commonly used parts through easy to read line drawings. See your local jacobsen dealer for a co...
Page 162: Index
128 index 1000480.....................103 1000770.....................105 1002031.......................53 1002032.......................53 1002154.... 69 , 87 , 89 , 95 1002224.....................105 1002226.....................109 1002498.......................99 1002532.....................107 1...
Page 163: Index
129 index 358794 ........................ 99 359615 .................. 61 , 63 360111 ............ 49 , 53 , 55 361064 ........................ 97 361117 ........................ 71 361439 ...................... 101 361451 ........................ 55 361647 .................. 53 , 55 361648 ...........
Page 164: Index
130 index 4210561.......................41 4210682.......................41 4210685.......................41 4210701.......................55 4210824.......................39 4211101.......................41 4211400.......................57 4211401.......................57 4211880.................73...
Page 165: Index
131 index 450171 ........................ 47 450193 ........................ 43 450321 ........................ 45 450323 ............ 47 , 61 , 63 450334 ........................ 43 450399 ............ 47 , 61 , 63 450408 ........................ 45 450410 ...... 47 , 57 , 61 , 63 450411 .............
Page 167
When performance matters. ™ jacobsen, a textron company 11108 quality drive, charlotte, nc 28273, ee.Uu. Www.Jacobsen.Com 800-848-1636 ransomes jacobsen limited west road, ransomes europark, ipswich, ip3 9tt, inglaterra número de registro de empresa en inglaterra: 1070731 www.Ransomesjacobsen.Com +4...