1. DL manuals
  2. Jacobsen
  3. Lawn Mower
  4. Super LF 1880
  5. Parts & Maintenance Manual

Jacobsen Super LF 1880 Parts & Maintenance Manual - 2    Specifications

Manual is about: Fairway Mower

Summary of Super LF 1880

  • Page 1

    Parts & maintenance manual ersatzteil- und wartungshandbuch when performance matters. ™ gb de german 19 17 18 13 6 5 9 15 16 7 8 10 4 3 11 1 - includes items 3 - 16 achtung wenn diese maschine nicht ordnungsgemäß verwendet wird, können ernsthafte verletzungen verursacht werden. Personen, die diese m...

  • Page 2

    © copyright 2008, textron inc. “all rights reserved, including the right to reproduce this material or portions thereof in any form.” this manual contains adjustment, maintenance, troubleshooting instructions, and parts list for your new jacobsen machine. This manual should be stored with the equipm...

  • Page 3

    3 table of contents 1 safety 1.1 operating safety .................................................. 4 1.2 important safety notes .........................................5 2 specifications 2.1 product identification............................................ 6 2.2 kubota d1105-e engine ..............

  • Page 4: 1    Safety

    1 safety 4 1 safety 1.1 operating safety ______________________________________________________ 1. Safety is dependent upon the awareness, concern, and prudence of those who operate or service the equipment. Never allow minors to operate any equipment. 2. It is your responsibility to read this manua...

  • Page 5: Safety    1

    Safety 1 5 1.2 important safety notes ________________________________________________ this safety alert symbol is used to alert you to potential hazards. Danger - indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Warning - indicates a potenti...

  • Page 6: 2    Specifications

    2 specifications 6 2 specifications 2.1 product identification _________________________________________________ 67955 .............................. Super lf 1880 2wd with rops 67956 .............................. Super lf 1880 4wd with rops 67957 .............................. Super lf 1880 turbo ...

  • Page 7: Specifications    2

    Specifications 2 7 2.4 cutting units: __________________________________________________________ reel................................. 5 reels, 18 in. (457 mm) wide reel diameter ................. 5 in. (127 mm) blade options ................. 8 or 11 blades cutting height ................. 0.30 to ...

  • Page 8: 3    Adjustments

    3 adjustments 8 3 adjustments 3.1 general ________________________________________________________________ 1. Adjustments and maintenance should always be performed by a qualified technician. If proper adjustment cannot be made, contact an authorized jacobsen dealer. 2. Replace, do not adjust, worn ...

  • Page 9: Adjustments    3

    Adjustments 3 9 3.4 neutral switch and 4wd cut-out switch________________________________ the traction pedal is designed to return to neutral whenever the forward or reverse foot pedals are released. If the mower continues to creep after the traction pedal is released, check neutral adjustment and a...

  • Page 10: 3    Adjustments

    3 adjustments 10 3.6 traction pedal speed limiter __________________________________________ cutting quality is better at speeds well below the transport speed of the mower. An initial mow speed of 6 mph is set at the factory and should be satisfactory for most cutting conditions. Local turf conditi...

  • Page 11: Adjustments    3

    Adjustments 3 11 3.9 steering adjustments__________________________________________________ 1. Turn wheels to straight ahead position. 2. Loosen jam nuts (q) on both sides of tie rod (r). 3. Turn tie rod (r) to provide proper toe-in. Toe-in must not exceed +1/16” (1.5 mm) (s). Align ball joints and ...

  • Page 12: 3    Adjustments

    3 adjustments 12 3.11 bedknife-to-reel _______________________________________________________ (pre-adjustment check) 1. Check the reel bearings for end play or radial play. There should be no end play or radial play. See section 3.14. 2. Inspect the reel blades and bedknife to insure good sharp edg...

  • Page 13: Adjustments    3

    Adjustments 3 13 3.13 cutting height _________________________________________________________ note: always make the reel to bedknife adjustment before adjusting height of cut. (sections 3.11 and 3.12). 1. Raise mowers to transport position then engage the parking brake, stop engine, and remove key ...

  • Page 14: 3    Adjustments

    3 adjustments 14 3.15 flash attach___________________________________________________________ installing cutting units 1. Place each cutting unit in front of its respective lift arm. Raise lift arm and position cutting unit so that yoke (r) is in line with swivel housing (q). Carefully lower arm ont...

  • Page 15: Adjustments    3

    Adjustments 3 15 3.17 torque specification ___________________________________________________ jacobsen uses grade 5 bolts as standard, unless otherwise noted. 3.18 specific torque ________________________________________________________ 1. Ball joints: 30-35 ft-lb (40.5 - 47.2 nm). 2. Bedknife shoe...

  • Page 16: 4    Maintenance

    4 maintenance 16 4 maintenance 4.1 general ________________________________________________________________ 1. Adjustment and maintenance should always be performed by a qualified technician. If proper adjustments cannot be made, contact an authorized jacobsen dealer. 2. Inspect the equipment on a r...

  • Page 17: Maintenance    4

    Maintenance 4 17 4.4 air filter _______________________________________________________________ check the service indicator daily. If red band appears in the window (a) replace the element. Do not remove the element for inspection or cleaning. Unnecessary removal of the filter increases the risk of ...

  • Page 18: 4    Maintenance

    4 maintenance 18 4.7 battery ________________________________________________________________ make absolutely certain the ignition switch is off and the key has been removed before servicing the battery. Tighten cables securely to battery terminals and apply a light coat of silicone dielectric greas...

  • Page 19: Maintenance    4

    Maintenance 4 19 4.10 hydraulic hoses _______________________________________________________ 1. Always lower implements to ground, disengage all drives, engage parking brake, stop engine, and remove key before inspecting or disconnecting hydraulic lines or hoses. 2. Check visible hoses and tubes da...

  • Page 20: 4    Maintenance

    4 maintenance 20 4.12 electrical system _____________________________________________________ general precautions that can be taken to reduce electrical problems are listed below. 1. Make certain all terminals and connections are clean and properly secured. 2. Check the interlock system and fuses re...

  • Page 21: Maintenance    4

    Maintenance 4 21 4.13 muffler and exhaust ___________________________________________________ to protect from carbon monoxide poisoning, inspect the complete exhaust system regularly and always replace a defective muffler. If you notice a change in the color or sound of the exhaust, stop the engine ...

  • Page 22: 4    Maintenance

    4 maintenance 22 4.17 care and cleaning _____________________________________________________ wash the mower and implements after each use. Keep the equipment clean. Note: do not wash any portion of the equipment while it is hot. Do not use high pressure spray or steam. Use cold water and automotive...

  • Page 23: Maintenance    4

    Maintenance 4 23 4.19 backlapping____________________________________________________________ check the reel and bedknife to determine if backlapping or grinding will restore the cutting edge. If wear or damage is beyond the point where the cutting edges can be corrected by the lapping process, they...

  • Page 24: 4    Maintenance

    4 maintenance 24 4.20 storage________________________________________________________________ general 1. Wash the mower thoroughly and lubricate. Repair and paint damaged or exposed metal. 2. Inspect the mower, tighten all hardware, replace worn or damaged components. 3. Drain and refill radiator. 4...

  • Page 25: Troubleshooting    5

    Troubleshooting 5 25 5 troubleshooting 5.1 general troubleshooting _____________________________________________ the troubleshooting chart below lists basic problems that may occur during start-up and operation. For more detailed information regarding the hydraulic and electrical systems contact you...

  • Page 26: Warning

    6 maintenance & lubrication charts 26 6 maintenance & lubrication charts 6.1 general ________________________________________________________________ 1. Always clean the grease fitting before and after lubricating. 2. Lubricate with grease that meets or exceeds nlgi grade 2 lb specifications. Apply ...

  • Page 27

    Maintenance & lubrication charts 6 27 6.3 maintenance charts ___________________________________________________ a - add or adjust c - clean i - inspect l- lubricate r - replace ar - as required * indicates initial service for new machines. ** or every two years whichever comes first. *** inspect vi...

  • Page 28: 7    Parts Catalog

    7 parts catalog 28 7 parts catalog 7.1 how to use the parts catalog _________________________________________ abbreviations n/s - not serviced separately, can only be obtained by ordering main component or kit. Ar -variable quantity or measurement is required to obtain correct adjustment. Symbols su...

  • Page 30

    © copyright 2008, textron inc. "alle rechte vorbehalten, einschließlich des rechts, dieses material oder teile davon auf irgendeine weise zu reproduzieren." dieses handbuch enthält die einstell-, wartungs- und fehlersuchanleitung und eine ersatzteilliste für ihr neues jacobsen-gerät. Dieses handbuch...

  • Page 31

    3 inhalt 1 sicherheit 1.1 betriebssicherheit............................................... 4 1.2 wichtige hinweise zur sicherheit .......................5 2 technische daten 2.1 produktkennzeichnung....................................... 6 2.2 kubota d1105-e3b motor ...................................

  • Page 32: 1    Sicherheit

    1 sicherheit 4 1 sicherheit 1.1 betriebssicherheit ____________________________________________________ 1. Sicherheit hängt vom bewusstsein, der vorsorge und vorsicht derer, die die maschine bedienen oder warten ab. Minderjährige sollten nie irgendwelche maschinen bedienen dürfen. 2. Sie sind dafür ...

  • Page 33: Sicherheit    1

    Sicherheit 1 5 1.2 wichtige hinweise zur sicherheit _______________________________________ dieses warnsymbol wird verwendet, um sie auf potentielle gefahren aufmerksam zu machen. Gefahr - weist auf eine sofortige gefahrensituation hin, die einen todesfall oder eine ernsthafte verletzung zur folge h...

  • Page 34: 2    Technische Daten

    2 technische daten 6 2 technische daten 2.1 produktkennzeichnung ________________________________________________ 67955.............................. Super lf 1880 2wd 67956.............................. Super lf 1880 4wd 67957.............................. Super lf 1880 turbo 4wd seriennummer ........

  • Page 35: Technische Daten    2

    Technische daten 2 7 2.4 schneidvorrichtungen _________________________________________________ schneidzylinder............... 5 schneidzylinder, 457 mm breit. Durchmesser des schneidzylinders............. 127 mm messeroptionen .............. 8 oder 11 messer schnitthöhe ..................... 7,6 - ...

  • Page 36: 3    Einstellungen

    3 einstellungen 8 3 einstellungen 3.1 allgemeines ___________________________________________________________ 1. Die einstellungen und wartungsarbeiten müssen immer von einem qualifizierten techniker durchgeführt werden. Wenn es nicht möglich ist, die richtige einstellung vorzunehmen, wenden sie sic...

  • Page 37: Einstellungen    3

    Einstellungen 3 9 3.4 schalter fÜr neutral und schalter zum abstellen des vierradantriebs ________________________________________ das fahrpedal ist so konstruiert, dass es immer dann, wenn die fußpedale für vorwärts oder rückwärts losgelassen werden, in die stellung neutral zurückgeht. Kriecht der ...

  • Page 38: 3    Einstellungen

    3 einstellungen 10 3.6 geschwindigkeitsbegrenzer fahrpedal _______________________________ die schnittqualität ist bei geschwindigkeiten deutlich unterhalb der transportgeschwindigkeit des traktors besser. Eine anfängliche mähgeschwindigkeit von ca. 10 km/h wurde im werk eingestellt und dürfte für d...

  • Page 39: Einstellungen    3

    Einstellungen 3 11 3.9 einstellungen der lenkung ____________________________________________ 1. Drehen sie die räder gerade nach vor. 2. Lösen sie die kontermuttern (q) auf beiden seiten der spurstange (r). 3. Drehen sie die spurstange (r) entsprechend für die benötigte spur. Die spur darf 1,5 mm (...

  • Page 40: 3    Einstellungen

    3 einstellungen 12 3.11 trommel-untermesser _________________________________________________ (prüfung vor der einstellung) 1. Die lager der schneidzylinder auf längs- oder radialspiel überprüfen. Es darf kein längs- oder radialspiel vorhanden sein (siehe abschnitt 3.14). 2. Überprüfen, dass die tro...

  • Page 41: Einstellungen    3

    Einstellungen 3 13 3.13 schnitthÖhe ____________________________________________________________ hinweis: die einstellung von schneidzylinder zu untermesser muß vor der einstellung der schnitthöhe durchgeführt werden (siehe abschnitt 3.11 und 3.12). 1. Die mähvorrichtungen zur transportposition anhe...

  • Page 42: 3    Einstellungen

    3 einstellungen 14 3.15 flash attach___________________________________________________________ einbau der schneidvorrichtungen 1. Jede schneidvorrichtung vor ihren entsprechenden hebelarm plazieren. Den hebelarm anheben und die schneidvorrichtung so positionieren, daß sich der kragen (r) mit dem dr...

  • Page 43: Einstellungen    3

    Einstellungen 3 15 3.17 drehmomentdaten _____________________________________________________ jacobsen verwendet standardmäßig plattierte schrauben der festigkeitsklasse 5, wenn nicht anders angegeben. 3.18 anzugsdrehmomente ___________________________________________________ 1. Kugelgelenke: 40,5 -...

  • Page 44: 4    Wartung

    4 wartung 16 4 wartung 4.1 allgemeines ___________________________________________________________ 1. Die einstellung und wartungsarbeiten müssen immer von einem qualifizierten techniker durchgeführt werden. Wenn keine ordnungsgemäßen einstellungen vorgenommen werden können, wenden sie sich bitte an...

  • Page 45: Wartung    4

    Wartung 4 17 4.4 luftfilter ______________________________________________________________ die wartungsanzeige täglich prüfen. Das luftreiniger- element sofort austauschen, wenn der rote streifen sichtbar wird (a). Das element zur prüfung oder reinigung nicht entfernen. Ein unnötiges entfernen des f...

  • Page 46: 4    Wartung

    4 wartung 18 4.7 batterie _______________________________________________________________ unbedingt sicherstellen, daß der zündschalter auf off (aus) ist und der zündschlüssel abgezogen ist, bevor man an der batterie arbeitet. Die kabel sicher an den batterieklemmen anschließen und eine dünne schich...

  • Page 47: Wartung    4

    Wartung 4 19 4.10 hydraulikschlÄuche ___________________________________________________ 1. Vor dem prüfen oder trennen von hydraulikleitungen oder -schläuchen die vorrichtungen immer auf den boden senken, alle antriebe lösen, die feststellbremse anziehen, den motor abstellen und den zündschlüssel a...

  • Page 48: 4    Wartung

    4 wartung 20 4.12 elektrisches system___________________________________________________ es folgen allgemeine vorsichtsmaßnahmen, die zum reduzieren von problemen mit dem elektrischen system getroffen werden können. 1. Sicherstellen, daß alle anschlußklemmen und verbindungen sauber und richtig befes...

  • Page 49: Wartung    4

    Wartung 4 21 4.13 gerÄuschdÄmpfer und auspuff ________________________________________ um eine vergiftung durch kohlenmonoxid zu verhindern, das komplette auspuffsystem regelmäßig prüfen und einen fehlerhaften geräuschdämpfer immer auswechseln. Wenn festgestellt wird, daß sich die farbe oder der ton...

  • Page 50: 4    Wartung

    4 wartung 22 4.17 pflege und reinigung __________________________________________________ den traktor und die vorrichtungen nach jedem gebrauch abwaschen. Die ausrüstung sauber halten. Hinweis: keinen teil der ausrüstung abwaschen, wenn sie heiß ist. Keine hochdruckspritzvorrichtung oder dampf verwe...

  • Page 51: Wartung    4

    Wartung 4 23 4.19 rÜcklÄppen ____________________________________________________________ den schneidzylinder und das untermesser prüfen, um festzustellen, ob die schneidkante durch rückläppen oder schleifen wiederhergestellt werden kann. Wenn der verschleiß oder die beschädigung so stark ist, daß d...

  • Page 52: 4    Wartung

    4 wartung 24 4.20 lagerung ______________________________________________________________ allgemeine informationen 1. Den traktor gründlich waschen und schmieren. Beschädigtes und freigelegtes metall reparieren und lackieren. 2. Den traktor überprüfen, alle schrauben anziehen, verschlissene oder bes...

  • Page 53: Fehlersuche    5

    Fehlersuche 5 25 5 fehlersuche 5.1 allgemeines ____________________________________________________________ die folgende fehlersuchtabelle listet die grundsätzlichen probleme auf, die beim anlassen und betrieb entstehen können. Ausführlichere informationen über das hydraulik- und elektrische system ...

  • Page 54: Achtung

    6 wartungs- und schmierplÄne 26 6 wartungs- und schmierplÄne 6.1 allgemeines ___________________________________________________________ 1. Die schmierstellen immer vor und nach dem schmieren reinigen. 2. Zum schmieren eine nlgi-schmiere verwenden, die der lb-spezifikation von klasse 2 gerecht wird ...

  • Page 55

    Wartungs- und schmierplÄne 6 27 6.3 wartungsplÄne ________________________________________________________ a - auffüllen oder einstellen c - reinigen i - inspizieren l - schmieren r - wechseln/ersetzen ar - nach bedarf * bezeichnet erstinspektion bei neuen maschinen . ** oder alle zwei jahre, je nac...

  • Page 56: 7    Ersatzteilkatalog

    7 ersatzteilkatalog 28 7 ersatzteilkatalog 7.1 wie der ersatzteilkatalog zu verwenden ist __________________________ abkürzungen n/s - wird nicht separat gewartet. Ist durch bestellung der hauptkomponente oder des satzes erhältlich. Ar - variable menge oder abmessung ist erforderlich, um die richtig...

  • Page 57: Parts Catalog    7

    Parts catalog 7 29 7.3 parts catalog table of contents______________________________________ 1.1 ......... Decals ................................................................ 30 2.1 ......... Body components ............................................ 32 3.1 ......... Seat and suspension..........

  • Page 58: Lf 1880

    30 4wd 1 2 3 4 5 5 6 7 8 9 10 11 11 12 13 13 15 16 17 18 19 20 21 14 22 23 / 24 25 b io d e g radable flu id 105 db l wa 4181865 lf 1880 1.1 decals serial no. All.

  • Page 59: Lf 1880

    31 > change from previous revision this radiator contains anti-freeze protected to -26°f (-32°c) mix equal parts of clean water and a premium quality ethylene glycol based anti-freeze to maintain the boil over, rust and corrosion protection. Drain and discard coolant yearly. Read manual for addition...

  • Page 60: Lf 1880

    32 2 2 10 3 3 5 6 7 8 9 10 12 12 11 11 13 14 4 4 4 4 1 lf 1880 2.1 body components serial no. All.

  • Page 61: Lf 1880

    33 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 3005638 1 floorboard 2 409812 4 screw, 5/16-18 x 3/4” thread cut 3 403770 2 screw, 5/16-18 x 3/4” hex flange 4 445781 8 nut, 5/16-18 whiz-lock 5 3005650 1 seat pan 6 3007798 2 lock pin 7 4126102 1 hood a...

  • Page 62: Lf 1880

    34 1 2 3 4 5 6 7 8 17 17 1 8 19 19 20 20 21 22 22 2 3 24 24 25 25 25 26 27 27 9 10 11 12 1 3 14 15 14 lf 1880 3.1 seat and rops serial no. All.

  • Page 63: Lf 1880

    35 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 4139433 1 seat assembly suspension 4139450 1 • switch, seat reference sw5, see 49.1 5003769 1 • wire assembly 2 4139169 1 bracket, rear seat 3 4139170 1 bracket, front seat 4 523356 1 adjuster, latching ...

  • Page 64: Lf 1880

    36 1 2 3 4 5 6 30 7 8 9 10 11 12 13 14 15 15 16 17 18 19 20 21 22 23 24 24 25 26 27 29 28 lf 1880 4.1 instrument panel serial no. All.

  • Page 65: Lf 1880

    37 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 1002677 1 throttle handle 2 1002858 1 throttle cable 3 1004290 1 joystick, 1 axis reference sw12, see 49.1 4 162720 1 temperature gauge reference u4, see 49.1 447002 3 • lockwasher, #6 external tooth 444...

  • Page 66: Lf 1880

    38 a a 1 2 3 4 5 6 7 7 37 9 9 10 10 11 12 13 13 13 13 38 38 14 13 15 15 16 17 17 18 18 19 20 21 21 22 23 24 25 26 27 28 28 29 30 31 32 33 34 35 36 8 lf 1880 5.1 traction pedal and linkage serial no. All.

  • Page 67: Lf 1880

    39 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 2810214 1 arm, neutral return 2 461383 1 roll pin, 3/16 x 1” 3 2809632 1 bracket, neutral return 4 4121563 1 rod, neutral return 5 2809634 1 spring, compression 6 2809635 1 spacer 7 2809856 2 guide, spri...

  • Page 68: Lf 1880

    40 a b b a 1 2 3 38 39 39 40 4 4 5 6 7 8 n / s n / s n / s 41 42 41 42 43 43 10 11 12 13 14 15 16 17 18 19 19 20 21 21 21 22 23 23 24 24 25 26 26 27 27 28 29 30 31 32 32 33 33 34 35 36 37 9 44 lf 1880 6.1 parking brake serial no. All.

  • Page 69: Lf 1880

    41 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 1003872 1 pedal, brake 2 2811143 1 brake caliper, left side 3 2811144 1 brake caliper, right side 4 503660 1 • replacement pad set 5 557823 1 • pivot pin 6 557824 1 • pad, support 7 557825 1 • spring, le...

  • Page 70: Lf 1880

    42 1 2 3 4 5 6 7 8 9 10 11 12 13 13 14 15 16 17 18 19 20 20 21 22 22 23 24 25 38 39 40 40 41 26 27 28 28 28 29 29 30 31 32 32 32 32 33 34 35 36 37 38 39 40 40 41 42 43 44 44 44 lf 1880 7.1 frame and front axle serial no. All.

  • Page 71: Lf 1880

    43 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 1003536 1 channel, bumper 2 4182425 2 motor, front wheel see 40.1 3 554780 1 • key 4 554779 1 • nut 5 1004245 2 mount, bumper 6 2809907 2 nut, m10 spiralock flange 7 2811692 1 frame 8 453011 2 flat washe...

  • Page 72: Lf 1880

    44 1 2 3 4 5 6 7 8 9 10 12 11 13 22 14 15 16 17 18 19 20 21 14 11 13 23 lf 1880 8.1 steering tower serial no. All.

  • Page 73: Lf 1880

    45 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 5002918 1 actuator, gas spring 2 5002919 1 cable, actuator 3 2811346 1 tower, steering 4 4101283 1 valve, steering see 42.1 5 443828 1 • nut, 5/8-18 hex jam 6 3010651 1 cover, steering tower 7 3005934 2 ...

  • Page 74: Lf 1880

    46 2 2 3 3 5 6 7 8 9 10 12 11 13 14 16 18 19 19 19 20 21 21 38 38 22 23 26 27 28 29 30 32 32 4 17 15 24 25 33 33 36 37 37 34 35 35 31 1 lf 1880 9.1 2wd steering serial no. All.

  • Page 75: Lf 1880

    47 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 1003027 1 axle, steering 2 3005596 4 • bushing 3 319867 2 • bushing 4 471226 3 • grease fitting 5 4100800 1 tie rod 6 1002031 1 ball joint, l.H. Threaded tie rod 7 445647 1 • nut, 3/8-24 slotted hex 8 47...

  • Page 76: Lf 1880

    48 2 2 3 3 5 6 7 8 9 10 12 11 13 14 16 18 19 19 19 20 21 21 22 22 40 41 42 23 24 27 28 29 30 31 33 4 17 15 25 26 34 37 38 39 35 36 32 1 b b a a lf 1880 10.1 4wd steering serial no. 67956 all serial no. 67957 all.

  • Page 77: Lf 1880

    49 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 1003027 1 axle, steering 2 3005596 4 • bushing 3 319867 2 • bushing 4 471226 3 • grease fitting 5 4100800 1 tie rod 6 1002031 1 ball joint, l.H. Threaded tie rod 7 445647 1 • nut, 3/8-24 slotted hex 8 47...

  • Page 78: Lf 1880

    50 > change from previous revision 1 2 3 4 5 6 lf 1880 11.1 steering axle mounting serial no. All item part no. Qty. Description serial numbers/notes 1 3005667 1 shaft, steering axle mount 2 3005668 1 plate, mounting 3 461202 1 groove pin, 1/4 x 1-3/4” 4 445710 1 nut, 1-14 slotted hex 5 460068 1 cot...

  • Page 79

    51 > change from previous revision item part no. Qty. Description serial numbers/notes 1 445781 2 nut, 5/16-18 whiz-lock 2 365398 1 indicator, air cleaner service 3 3001388 1 bracket, air filter 4 3006096 1 hose, air cleaner inlet 5 3006097 1 hose, engine air intake 67955 and 67956 5 4166481 1 hose,...

  • Page 80: Lf 1880

    52 1 2 3 32 2 3 4 5 6 7 8 8 8 9 10 11 11 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 25 26 27 28 29 30 31 31 lf 1880 13.1 radiator and oil cooler serial no. All.

  • Page 81: Lf 1880

    53 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 1002547 1 shroud, fan 2 452004 6 flat washer, 1/4 3 446130 6 lockwasher, 1/4 heavy 4 400106 5 screw, 1/4-20 x 5/8” hex head 5 1002548 1 radiator 550863 1 • radiator pressure cap 162479 1 • drain cock 6 3...

  • Page 82: Lf 1880

    54 3 7 2 25 20 21 22 8 10 6 3 15 9 4 11 3 6 28 26 21 16 24 27 18 19 5 fuel solenoid 14 16 17 12 13 1 23 lf 1880 14.1 engine serial no. All.

  • Page 83: Lf 1880

    55 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 ref 1 kubota d1105-e 67955 and 67956 1 ref 1 kubota d1105-te 67957 2810346 1 • engine oil filter 2 366879 4 isolator, engine 3 446146 10 lockwasher, 7/16 4 363996 1 switch, temp warning reference sw4, se...

  • Page 84: Lf 1880

    56 1 2 3 4 5 6 7 8 9 9 9 9 10 11 11 12 12 13 14 15 16 17 18 19 20 lf 1880 15.1 engine exhaust serial no. 67955 - all serial no. 67956 - all.

  • Page 85: Lf 1880

    57 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 363586 2 screw, m8-1.25 x 20 mm hex head 2 3005936 1 muffler 3 3006027 1 tail pipe 4 400192 2 screw, 5/16-18 x 1-1/2” hex head 5 5003476 1 gasket, exhaust included with engine 6 4145890 1 fuel filter inc...

  • Page 86: Lf 1880

    58 11 12 14 16 18 17 15 13 a a 4 4 7 6 10 9 1 6 6 5 2 3 8 lf 1880 16.1 turbo engine exhaust serial no. 67957 - all.

  • Page 87: Lf 1880

    59 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 3008220 1 bracket, muffler support 2 3006979 1 muffler, turbo engine 3 3008221 1 tail pipe, turbo engine 4 48540-01 4 clamp, hose 5 363586 5 screw, m8-1.25 x 20 mm hex head 6 446136 7 lockwasher, 5/16 he...

  • Page 88: Lf 1880

    60 12 13 16 16 14 14 9 12 13 9 10 15 19 19 19 19 19 19 20 19 20 19 20 20 19 20 20 20 17 43 18 44 17 18 8 1 2 1 3 41 41 41 41 3 7 20 7 5 6 6 6 6 11 11 22 21 23 11 24 24 16 39 12 13 15 42 42 8 16 14 19 19 19 20 20 20 20 17 18 8 1 2 3 41 41 3 7 19 17 27 26 25 26 16 18 5 6 6 6 6 11 11 22 21 23 11 24 24 ...

  • Page 89: Lf 1880

    61 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 2811191 3 lift arm 2 471214 1 • grease fitting 3 2811198 2 • bushing 4 4174061 2 spring, extension 5 4116814 3 spring arm 6 363539 4 • bushing 7 2811203 3 pin, cylinder float 8 2811244 3 yoke, pivot 9 28...

  • Page 90: Lf 1880

    62 12 13 16 16 14 14 9 10 15 19 19 19 19 19 20 19 20 19 20 20 20 20 17 17 18 18 17 18 8 1 2 1 3 30 30 30 30 3 7 20 7 5 6 6 6 6 11 11 22 21 23 11 24 24 16 28 12 13 15 8 19 17 18 5 6 6 6 6 11 11 22 21 11 24 24 16 4 29 31 31 32 33 27 26 25 26 16 lf 1880 18.1 rear lift arms serial no. All.

  • Page 91: Lf 1880

    63 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 2811191 2 lift arm 2 471214 1 • grease fitting 3 2811198 2 • bushing 4 4174061 1 spring, extension 5 4116814 2 spring arm 6 363539 4 • bushing 7 2811203 2 pin, cylinder float 8 2811244 2 yoke, pivot 9 28...

  • Page 92: Lf 1880

    64 2 3 3 3 5 6 7 8 9 10 12 11 11 14 14 16 18 19 13 13 4 17 15 1 lf 1880 19.1 hydraulic and fuel tanks serial no. All.

  • Page 93: Lf 1880

    65 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 n/s 1 fuel tank assembly, diesel 1004265 1 • fuel tank 3007111 1 • • drop tube 350677 1 • • o-ring 3005996 1 • float, fuel level 5000869 1 • • bushing 2 2721806 1 • cap, diesel fuel 3 361117 3 • bushing ...

  • Page 94: Lf 1880

    66 > change from previous revision 2 2 3 5 6 4 a 3 7 7 8 9 10 10 11 11 12 5 6 4 3 5 6 4 1 a lf 1880 20.1 hydraulic valve mounting serial no. All item part no. Qty. Description serial numbers/notes 1 4135565 1 lift valve see 44.1 2 4135576 2 reel valve see 43.1 3 365466 3 fitting, diagnostic 4 363030...

  • Page 95

    67 > change from previous revision 2 3 5 6 7 4 1 item part no. Qty. Description serial numbers/notes 1 1002807 1 filter, return 5002892 1 • element, filter 2 403769 2 screw, 1/4-20 x 1/2” hex flange 3 1003142 1 4wd valve see 45.1 4 2811860 1 bracket, 4wd valve mounting 5 408858 4 screw, 5/16-18 x 3/...

  • Page 96: Lf 1880

    68 > change from previous revision to pump from pump to steering cylinder in out lt rt (3) (3) (4) 2 2 3 3 8 9 10 11 12 12 8 5 6 7 4 4 1 1 lf 1880 22.1 steering hydraulics serial no. All item part no. Qty. Description serial numbers/notes 1 339974 2 adapter, 4-6 straight 2 339979 2 adapter, 6-6 stra...

  • Page 97

    69 > change from previous revision item part no. Qty. Description serial numbers/notes 1 339989 4 adapter, 10-10 straight 2 340337 2 adapter, 10-10-10 union tee 3 4101040 2 hose, left wheel motor 4 4101033 2 hose, right wheel motor 5 4108361 1 tube, traction pump 6 4108360 1 tube, traction pump 7 33...

  • Page 98: Lf 1880

    70 4 4 6 6 7 8 12 11 12 11 6 2 2 2 2 4 4 1 1 9 10 3 14 13 14 3 2 2 5 13 5 1 1 lf 1880 24.1 4wd hydraulics serial no. All.

  • Page 99: Lf 1880

    71 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 339985 4 adapter, 8-10 straight 2 339989 6 adapter, 10-10 straight 3 340066 2 adapter, 8-8 90° 4 340337 4 adapter, 10-10-10 union tee 5 4101032 2 hose, rear wheel motor 4wd valve port m2 6 4101033 4 hose...

  • Page 100: Lf 1880

    72 > change from previous revision 2 3 3 3 3 3 3 5 6 7 8 9 9 9 10 10 10 4 1 1 1 1 1 1 lf 1880 25.1 front lift hydraulics serial no. All item part no. Qty. Description serial numbers/notes 1 339974 6 adapter, 4-6 straight 2 4100225 1 hose, center cylinder to valve lift valve port 2 3 340057 6 adapter...

  • Page 101

    73 > change from previous revision 2 2 3 5 5 6 7 7 8 9 4 1 1 16 15 11 10 12 13 13 14 14 item part no. Qty. Description serial numbers/notes 1 339979 2 adapter, 6-6 straight 2 340057 4 adapter. 4-6 90° 3 4100223 1 hose, right cylinder to left tee 4 4110942 1 hose, right tee to right cylinder 5 340215...

  • Page 102: Lf 1880

    74 > change from previous revision 2 2 2 4 4 4 4 4 4 5 6 7 8 9 10 11 3 3 1 1 12 lf 1880 27.1 front reel hydraulics serial no. All item part no. Qty. Description serial numbers/notes 1 339961 2 locknut, 11/16-16 bulkhead 2 2822505 3 motor, reel 5001068 1 • o-ring, mount 5002651 1 • seal kit 5003688 1...

  • Page 103

    75 > change from previous revision 2 4 4 2 4 8 8 4 5 5 6 9 7 3 3 1 1 item part no. Qty. Description serial numbers/notes 1 339962 2 locknut, 13/16-16 bulkhead 2 2822505 2 motor, reel 5001068 1 • o-ring, mount 5002651 1 • seal kit 5003688 1 • kit, front cover 3 339985 2 adapter, 8-10 straight 4 34006...

  • Page 104: Lf 1880

    76 > change from previous revision 2 3 6 5 6 6 7 7 7 8 8 9 10 11 11 13 12 4 1 14 lf 1880 29.1 tank hydraulics serial no. All item part no. Qty. Description serial numbers/notes 1 4100773 1 tube, manifold 2 4100765 2 hose, formed gear pump suction 3 4100766 1 hose, charge pump suction 4 4100764 1 hos...

  • Page 105

    77 > change from previous revision 2 3 5 6 7 7 7 7 7 8 9 10 10 12 12 11 4 1 item part no. Qty. Description serial numbers/notes 1 4100778 1 tube, front reel valve return 2 4100777 1 tube, return manifold 3 4100776 1 tube, rear reel valve return 4 4100768 1 hose, formed cooler outlet 5 4100767 1 hose...

  • Page 106: Lf 1880

    78 > change from previous revision 2 3 6 7 12 12 12 9 10 11 13 5 8 4 1 lf 1880 31.1 front return hydraulics serial no. All item part no. Qty. Description serial numbers/notes 1 4110942 1 hose, right wheel motor drain 2 340215 1 adapter, 6-6-6 bulkhead run tee 3 340143 1 adapter, 6-6-6 swivel branch ...

  • Page 107

    79 > change from previous revision 32.1 rear return hydraulics serial no. All item part no. Qty. Description serial numbers/notes 1 4100775 1 tube, tee to tank 2 4100774 1 tube, lift valve to tee 3 4100772 1 hose, left wheel motor drain 4 4177881 1 hose, rear return tee to tank tee 5 339985 1 adapte...

  • Page 108: Lf 1880

    80 13 15 14 right front cylinder hoses traction hoses traction hoses 2wd units 4wd tubes steering hoses 4wd units 13 14 15 traction hoses return manifold tube 4wd units 13 14 15 2 3 5 5 6 7 4 4 1 16 18 23 11 17 19 20 21 22 8 10 12 9 lf 1880 31.1 hydraulic clamping serial no. All.

  • Page 109: Lf 1880

    81 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 3003110 1 clamp, double 5/8” hose 2 400108 2 screw, 1/4-20 x 3/4” hex head 3 400124 1 screw, 1/4-20 x 2-1/2” hex head 4 443102 3 nut, 1/4-20 hex 5 446128 3 lockwasher, 1/4 6 4101001 1 bracket, clamp 7 36...

  • Page 110: Lf 1880

    82 > change from previous revision 2 3 5 6 7 8 4 1 lf 1880 32.1 battery tray serial no. All item part no. Qty. Description serial numbers/notes 1 3000525 1 bracket, battery 2 3005750 2 rod, j hook 3 446130 2 lockwasher, 1/4 heavy 4 443102 2 nut, 1/4-20 hex 5 452004 2 flat washer, 1/4 6 131076 1 cabl...

  • Page 111

    83 > change from previous revision 2 3 3 5 6 7 4 1 item part no. Qty. Description serial numbers/notes 1 ref 1 electrical box see 34.1 2 4139099 1 cover, electrical box 3 409807 4 screw, 1/4-20 x 3/4” thread cut 4 403910 2 screw, #10-24 x 1/2” truss head 5 446116 2 lockwasher, #10 6 444310 2 nut, #1...

  • Page 112: Lf 1880

    84 k20 k18 k17 k14 k13 k21 k7 k6 k3 k4 k2 k1 k22 cb1 sw7 k8 d1 d2 f1 f2 f3 f4 f5 f6 f7 2 3 5 7 8 9 10 12 11 11 11 13 14 16 4 17 17 17 17 15 15 15 15 part of 1 part of 1 part of 1 part of 1 part of 1 6 18 20 19 15 u6 lf 1880 34.1 electrical box serial no. All.

  • Page 113: Lf 1880

    85 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 4135544 1 harness, wire 2 2811376 2 • card, 4 diode reference d1 and d2, see 49.1 3 2811358 2 • clip, mounting 4 2811608 2 • cover, diode 5 4126082 13 relay, spdt with diode reference k1-k3, k6-k8, k13, ...

  • Page 114: Lf 1880

    86 uses steering tower mounting hardware a a s e f g j n m k b c l p r h d a - head lights b - front reel valve c - rear reel valve d - lift valve e - seat switch f - neutral switch g - 4wd switch h - fuel pump j - instrument panel k - glow plugs l - starter m - oil pressure switch n - alternator p ...

  • Page 115: Lf 1880

    87 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 345671 3 clamp, 13/16” wire harness 2 446140 5 lockwasher, 3/8 3 443110 6 nut, 3/8-16 hex 4 1004465 1 pump, fuel reference m2, see 49.1 5 365976 2 elbow, 90° fuel 6 445784 2 nut, 1/4-20 whiz lock 7 40010...

  • Page 116: Lf 1880

    88 2 2 3 3 3 5 6 7 8 9 10 12 11 13 14 16 18 19 20 21 22 23 24 27 28 29 30 31 33 34 4 17 15 25 26 32 1 40 37 38 39 35 36 40 manufactured under one or more of the following u.S. Patents: 4924663 6253533 4181863 4182520 lf 1880 36.1 reel reel drive serial no. All.

  • Page 117: Lf 1880

    89 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 4119514 1 frame, 18” reel 2 4182520 1 • decal, groomer warning 3 4181863 2 • decal, danger 4 4119513 1 reel, 11 blade used on 67932 only 4 4119512 1 reel, 8 blade used on 67933 only 5 1000480 1 housing, ...

  • Page 118: Lf 1880

    90 2 3 5 6 7 8 9 10 12 11 24 13 13 14 16 18 19 19 20 21 21 22 22 23 23 4 17 15 1 lf 1880 37.1 reel shield and rollers serial no. All.

  • Page 119: Lf 1880

    91 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 2811027 1 shield, reel 2 3005692 2 knob, front roller adjusting 3 3008438 1 bracket, roller 4 3008439 1 bracket, roller 5 343616 2 stud, front roller adjusting 6 345510 2 spacer, lift yoke 7 352737 2 set...

  • Page 120: Lf 1880

    92 > change from previous revision 2 3 5 6 7 8 4 1 lf 1880 38.1 rear roller part number 4115860 serial no. All item part no. Qty. Description serial numbers/notes 1 5000625 2 bearing, cup and cone 2 2811039 1 shaft, roller 3 4115557 2 washer 4 3000983 2 oil seal 5 3001656 2 seal, oil 6 3001762 2 sle...

  • Page 121

    93 > change from previous revision 2 3 5 6 7 8 9 10 11 4 1 item part no. Qty. Description serial numbers/notes 1 3008593 1 tube, down pressure 2 352435 1 spacer 3 366974 1 rod end 4 400268 1 screw, 3/8-16 x 1-3/4” hex head 5 4113001 1 spring, down pressure 6 443110 1 nut, 3/8-16 hex 7 443812 1 nut, ...

  • Page 122: Lf 1880

    94 > change from previous revision 1 2 3 4 5 6 7 8 2 2 2 9 10 11 lf 1880 40.1 front wheel motor part number 4182425 serial no. All item part no. Qty. Description serial numbers/notes 1 a 1 seal exclusion 2 a 4 seal, 3” i.D. 3 b 1 back up ring 4 b 1 shaft seal 5 5003384 1 shaft and bearing kit 6 5547...

  • Page 123

    95 > change from previous revision 1 2 3 4 5 6 7 8 2 2 2 9 10 11 item part no. Qty. Description serial numbers/notes 1 a 1 seal exclusion 2 a 4 seal, 3” i.D. 3 b 1 back up ring 4 b 1 shaft seal 5 554781 1 shaft and bearing kit 6 554780 1 key 7 554779 1 hex nut 8 a 1 shaft face seal 9 a 1 inner face ...

  • Page 124: Lf 1880

    96 2 3 5 6 7 8 9 10 12 11 11 11 13 14 16 16 16 16 18 19 20 21 22 23 24 27 28 29 30 31 33 4 17 15 25 26 34 37 35 36 32 1 lf 1880 42.1 steering valve part number 4101283 serial no. All.

  • Page 125: Lf 1880

    97 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 1 443108 4 locknut, 5/16-18 center 2 n/s 1 port cover 3 c 1 seal, o-ring 4 551105 1 drive link 5 c 4 seal, o-ring 6 443828 1 nut, 5/8-18 hex jam 7 5002056 4 special bolt 8 5002060 1 port manifold 9 b 3 • s...

  • Page 126: Lf 1880

    98 > change from previous revision 2 8 3 9 5 5 7 7 6 4 4 1 lf 1880 43.1 reel valve part number 4135576 serial no. All item part no. Qty. Description serial numbers/notes 1 4143172 1 valve, relief 5003579 1 • seal kit 2 5003080 1 flow control 5003579 1 • seal kit 3 4136815 1 solenoid valve 339909 4 •...

  • Page 127

    99 > change from previous revision p t t g 10 9 8 1 2 3 4 6 front top rear 2 / 5 3 6 6 7 8 8 9 10 4 1 item part no. Qty. Description serial numbers/notes 1 5003144 1 relief valve 5003579 1 • seal kit 2 5001355 3 pilot operated check valve 5003578 1 • seal kit 3 4136815 1 solenoid valve 339909 4 • o-...

  • Page 128: Lf 1880

    100 > change from previous revision 2 3 3 4 1 lf 1880 45.1 4wd valve part number 1003142 serial no. All item part no. Qty. Description serial numbers/notes 1 5002944 1 2 position, 3 way solenoid valve 2 5002945 1 coil 3 5001065 3 hex plug 4 5003195 1 nut, coil 5002947 1 seal kit.

  • Page 129

    101 > change from previous revision 2 3 4 1 5 item part no. Qty. Description serial numbers/notes 1 n/s 1 main case and input shaft see 47.1 2 n/s 1 valve plate and charge pump see 48.1 ● 3 n/s 1 gasket, valve plate 4 n/s 4 screw, 3/8-16 x 3-1/2” socket head 5 n/s 2 pin, alignment ● included in seal...

  • Page 130: Lf 1880

    102 2 3 5 6 7 7 8 9 10 12 11 13 14 16 18 19 19 20 20 21 22 23 24 27 28 4 17 15 25 25 26 1 lf 1880 47.1 main case and input shaft part number 4149857 (continued) serial no. All.

  • Page 131: Lf 1880

    103 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 4119328 1 shaft and bearing assembly 1 n/s 1 • driveshaft with sae spline 2 n/s 1 • bearing, front driveshaft 3 n/s 1 • ring, retaining 4 n/s 1 • retainer, seal 5 n/s 1 • ring, bearing retaining ● 6 n/s 1...

  • Page 132: Lf 1880

    104 2 2 3 3 5 6 7 7 8 9 11 10 12 13 15 17 28 29 18 19 19 20 23 24 25 26 4 4 16 14 21 22 22 27 1 lf 1880 48.1 valve plate and charge pump part number 4149857 (continued) serial no. All.

  • Page 133: Lf 1880

    105 > change from previous revision lf 1880 item part no. Qty. Description serial numbers/notes 4119330 1 front valve plate assembly 1 n/s 1 • valve plate 2 n/s 2 • cap, relief valve ● 3 n/s 2 • o-ring 4 n/s 2 • relief valve, 3045 psi 5 n/s 1 • plug, #3 ● 6 n/s 1 • o-ring 7 n/s 2 • pin, locating 500...

  • Page 134: Lf 1880

    106 m1 b s f b ig l u1 r2 k5 h p g bk cb1 f5 r1 30 85 86 87 87a k1 30 85 86 87 87a 30 85 86 87 87a 30 85 86 87 87a k17 30 85 86 87 87a k2 30 85 86 87 87a k3 d1 f6 f7 f1 f2 f3 off - none run - b + i gp - b + i + gp start - b + i + s b i s gp sw1 k20 30 85 86 87 87a k8 30 85 86 87 87a u5 u3 u4 u7 bk b...

  • Page 135: Lf 1880

    107 30 85 86 87 87a k18 30 85 86 87 87a k14 5 3 2 1 u6 d2 30 85 86 87 87a k13 30 85 86 87 87a k7 30 85 86 87 87a k6 og/pk og/pk og/pk og/pk pk pk gy/wh 3 2 1 6 5 4 gy/wh gn/wh gn/wh gy/og gy/og gy/og gy/rd gy/rd gy/rd db/wh db/wh db/wh rd/wh ye/bk bn/ye gn/rd db/rd db/rd tn/bu tn/bu tn/bu db/rd gn/r...

  • Page 136: Lf 1880

    108 lf 1880 item reference illustration part number description serial numbers/notes b1 365099 battery cb1 see 34.1 361439 50 amp circuit breaker (alternator) d1 see 34.1 2811376 diode block (interlock) included in main harness d2 see 34.1 2811376 diode block (lift/lower) included in main harness f1...

  • Page 137: Lf 1880

    109 lf 1880 sw3 see 35.1 4140149 neutral proximity switch sw4 see 14.1 363996 water temperature switch sw5 see 3.1 554390 seat switch sw6 see 4.1 3006449 reel switch sw7 see 34.1 3006447 back lap switch sw8 see 17.1 4140149 reel position proximity switch sw9 see 4.1 3006436 4wd switch 4wd units only...

  • Page 138: Lf 1880

    110 a b p t .39 ci .39 ci .39 ci 3045 psi 1160 psi 3045 psi 58 psi 1.35 ci .425 ci 3000 rpm a b gear pump front reel valve lr reel motor rr reel motor rf reel motor c reel motor lf reel motor 10 micron 25 psi crack bypass 30 psi crack bypass return filter oil cooler a b c d e f g h .60 ci .60 ci .60...

  • Page 139: Lf 1880

    111 > change from previous revision 1 2 3 4 6 8 9 10 g p t t left front cylinder center cylinder left rear cylinder right rear cylinder right front cylinder steering unit in out rt lt 6.6 ci 1750 psi 500 psi .040 .052 .032 .032 .026 .026 .032 one way 19.0 ci 19.0 ci front wheel motors 4wd valve rear...

  • Page 140: Product Name

    112 x w w w x w x w w-x o-ring face seal size o-ring boss dash size w-x o-ring face seal size o-ring boss dash size w-x o-ring face seal size w-x o-ring face seal size o-ring face seal size w-x o-ring face seal size o-ring face seal size o-ring face seal size w-x o-ring face seal size o-ring face se...

  • Page 141: Product Name

    113 > change from previous revision product name adapter part number. Dash size adapter type (w) o-ring (x) o-ring (y) o-ring (z) o-ring 339972 4-4 straight adapter 339908 339896 339974 4-6 straight adapter 339908 339897 339979 6-6 straight adapter 339909 339897 339984 8-8 straight adapter 339910 33...

  • Page 142: Fluids And Compounds

    Fluids and compounds * refer to the parts & maintenance manual for the correct hydraulic oil requirements for your machine. Jacobsen offers a high usage parts catalog illustrating commonly used parts through easy to read line drawings. See your local jacobsen dealer for a copy. Hydraulic fluid* 5001...

  • Page 143: Index

    115 index 1000480 ...................... 89 1001758 ...................... 33 1002031 ................ 47 , 49 1002032 ................ 47 , 49 1002033 ................ 57 , 59 1002224 ...................... 91 1002547 ...................... 53 1002548 ...................... 53 1002655 ................

  • Page 144: Index

    116 index 352435.........................93 352726.........................41 352737.........................91 352901.........................39 353190.........................73 353914...................43 , 49 358794...................61 , 63 358971.........................53 359611.................

  • Page 145: Index

    117 index 5000625 ...................... 92 5000869 ...................... 65 5000919 ...................... 51 5000920 ...................... 51 5000921 ...................... 51 5001065 .............. 98 , 100 5001068 ................ 74 , 75 5001355 ...................... 99 5002051 ................

  • Page 148

    Jacobsen, a textron company 11108 quality drive, charlotte, nc 28273 www.Jacobsen.Com 800-848-1636 when performance matters. ™ qualität, leistung und support von weltklasse world class quality, performance and support equipment from jacobsen is built to exacting standards ensured by iso 9001 and iso...