Jacto CD 400 Operator's Manual

Summary of CD 400

  • Page 1

    Tank lever rod chamber nozzle 2- sprayer view 1- introduction this manual contains information for the proper assembly, operation and care of your sprayer. Carefully read and follow the instructions contained in this manual before using your sprayer. 3- specifications model ............................

  • Page 2

    Llm-438 contents of the plastic bag attention: be careful taking the sprayer out of the carton as the lever is shipped loose and can cause damage. 4- assembly procedures remove from the sprayer carton the following parts: 02 rod tank lance 5- installing the shaft - insert the shaft (1) into the free...

  • Page 3

    - lightly grease the orifice on the pump lever. Fit a flat washer on the rod end. - lightly grease the orifice on the chamber top. - fit a flat washer on the shaft and rod. - for easy assembly, install the lever on the shaft and the rod on the chamber top at the same time. - install the other flat w...

  • Page 4

    10- adjusting the shoulder strap the tank is contoured for the operator comfort. The shoulder straps can be quickly adjusted to properly position the sprayer on the operator's back. See below. Tightening - hold the strap buckle firmly with one hand, and pull the handle downward with the other hand. ...

  • Page 5

    12 - remove the shaft (7) and detach the shoulder straps (8) from both sides. - invert the positions as shown in the figure below (to install the shaft, follows ins- tructions of the item 05). -install the washers and pumping lever on the rod so as to be operated with the right hand. Locking ring (1...

  • Page 6

    06 - do not eat, drink or smoke while spraying. - do not pollute the environment. - keep the pro- ducts out of reach of children and animals. Attention: the clothing used during the application must be washed separate from other clothes of ordinary use. - after finishing the spray application, take ...

  • Page 7

    Safety precautions - read carefully the chemicals manufacturer's label. - use of individual protective clothing and safety equipment is required. Attention - wash hands and other parts of the body that have touched chemicals before starting to spray. Chemical product - stir until it becomes an homog...

  • Page 8

    Spray nozzles flat fan identification (part no. - description) nozzle type (1197536) jef 11002 yellow (1197535) jef 110015 green (1197537) jef 11003 blue herbicides cone cone flat fan deflector adjustable cone agrochemicals and foliar fertili- zers. 90º cone and concentrated jet 45 0.16 45 0.21 45 0...