Jacto HD-400 Operator's Manual

STATEMENT OF LIMITED WARRANTY

MÁQUINAS AGRÍCOLAS JACTO S.A. shall warrant the equipment described in this 

manual and shall repair or replace parts and components which, under normal ope-

ration and wear, in accordance with technical recommendations, show DEFECTS IN 

MATERIAL OR WORKMANSHIP, based on the following conditions.

WARRANTY PERIOD

- 01 (one) year from the date of sale to the original purchaser.

WARRANTY APPLICATION

- JACTO shall honor this warranty, free of charge, if any part or component shows 

defect in  MATERIAL OR WORKMANSHIP, after final analysis at the factory.

THIS WARRANTY SHALL BE NULL & VOID IN CASE OF:

- Misuse of the equipment against specifications in the OPERATOR'S MANUAL, 

overwork or accidents.

- Preventive/remedial maintenance performed by unauthorized people.

- Use of parts and components not supplied by JACTO.

- Modification of the equipment or any characteristic of the original design.

THIS WARRANTY SHALL EXCLUDE:

- Parts which show wear and tear due to use, UNLESS THEY SHOW DEFECTS IN 

WORKMANSHIP, ASSEMBLY OR MATERIAL.

- Damages resulting from accidents.

- Transportation or freight of the equipment, parts and components in case such war-

ranty is not approved.

- Transportation and mobilization of technicians.

GENERAL INFORMATION:

- Parts replaced within the warranty period shall be property of JACTO.

- The warranty on replaced parts and components shall expire together with the equip-

ment warranty period.

- Eventual delays in performing services shall not give the owner right either to indem-

nity or to extension of the warranty period.

- JACTO reserves the right to modify its products or to interrupt the manufacture wi-

thout prior notice.

09/2012  - 1173656 - 0479-MI_USA

1- INTRODUCTION

This manual contains information for the proper assembly, operation and care of 

your HD400 sprayer.

Carefully read and follow the instructions contained in this manual before using 

your sprayer.

Tank

Lever

Lance

Trigger 

valve

Diaphragm

Chamber

Nozzle

Lid

2- SPRAYER VIEW

3- SPECIFICATIONS

Pump

- Type ................................. Piston

- Material ............................ Polypropylene

- Working pressure (max.) . 65 psi

Lance length ...................... 18 in.

Hose length ....................... 53 in.

Nozzle fitted ....................... JD 12 P

Model ......................... HD400

Net weight.................. 8.16 lbs

Tank

- Capacity .................. 4 gallons

- Material .................... Polypropylene

- Fill opening diameter 4.5 in.

JACTO INC.

19217 SW 119

 th 

Ave.

Tualatin, Oregon 97062

Tel: (503) 885-8723

Fax: (800) 511-3671

Toll free: (800) 522-8610

E-mail: info@jacto.com

Home page: www.jacto.com

OPERATOR'S MANUAL

HD-400