Jacuzzi 4242N Installation Instructions Manual

Summary of 4242N

  • Page 1

    Illustration shown here features a right hand seat wall unit with all options. Use installation instructions provided with product. Product specifications are subject to change without notice. Whirlpool bath r neo angle shower system without body spray or with body spray installation instructions ba...

  • Page 2

    Installation instructions important: read complete instructions before beginning installation. Review instructions for all optional items being considered for installation before completing rough-in. The successful installation of the options may require some modifications to be made to the custom s...

  • Page 3

    Step 2. Rough-in plumbing a. Install water lines and rough plumbing. Valve should be located between 36" and 48" from the floor. Use blocking and secure with pipe straps. B. If stationary shower is used, install shower riser. Suggested shower head location is 78" from the floor (above the endwall). ...

  • Page 4

    Step 4. Back or body spray installation a. Attach the pins to the wall, (5) per side. B. Temporarily place wall in position on the base and against the corner stud wall. C. Temporarily place the shelf wall and seat wall in position by engaging the pins and holes. D. Line up system walls and base at ...

  • Page 5

    Washer nameplate lag screw secure flange to studs with drywall screws 1/2" bead of construction adhesive at 1" centers construction adhesive needs to bond studs to stiffeners stud back stiffener step 6. Shelf wall installation caulking accessory bracket front notch caulking a. Attach the accessory b...

  • Page 6

    Jacuzzi whirlpool bath national headquarters p.O. Drawer j, walnut creek, ca 94596 (925) 938-7070 service support: call (800) 288-4002 jacuzzi whirlpool bath regional offices ©1997 jacuzzi whirlpool bath m903000 b 12/02 printed on recycled paper printed in u.S.A . Product specifications are subject ...

  • Page 7: Shower System Product

    Jacuzzi whirlpool bath limited warranty shower system product warranty coverage jacuzzi whirlpool bath (the “company”) offers the following express limited warranty to the original purchaser of any jacuzzi whirlpool bath shower system product (“unit”) who purchases the product for personal or single...

  • Page 8

    Responsibilities of others inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user. They are responsible for ensuring the unit is free of defect or damage. Notices are placed on and in the unit and on the shipping carton ...