1. DL manuals
  2. Jacuzzi
  3. Hot Tub
  4. Aero Plus C460000
  5. Owner's Manual

Jacuzzi Aero Plus C460000 Owner's Manual

Manual is about: Portable Whirlpool Spa

Summary of Aero Plus C460000

  • Page 1

    Portable whirlpool spa owner's manual whirlpool b ath r the aero plus ™.

  • Page 2

    Owner’s record date purchased __________________________________________________________ purchased from __________________________________________________________ installed by _______________________________ date _________________________ spa serial number __________________________ model no. C46000...

  • Page 3: The Aero Plus

    1 the aero plus ™ portable whirlpool spa owner’s manual model c460000 installation instructions ____________________________________________ 2-7 inspection and shipping claim ________________________________________ 3 unpacking ________________________________________________________ 3 positioning y...

  • Page 4: The Aero Plus

    30" serial number location 84" 76" the aero™ plus—a portable whirlpool spa by jacuzzi whirl- pool bath—is a revolutionary spa of unparalleled design. Its graceful, free-flowing lines provide aesthetic pleasure, and its full-featured elegance provides the comfort and luxurious spa experience you expe...

  • Page 5: Installation Instructions

    3 installation instructions inspection and shipping claim check for shipping damage upon receipt of the spa. Jacuzzi whirlpool bath is not responsible for damage to the spa sustained during shipping. If damage is evident before unpacking, see instructions regarding shipping claims on the outside of ...

  • Page 6: Positioning Your Spa

    4 positioning your spa because your aero plus spa is portable, you can locate it just about anywhere you wish—on a deck,patio, or even indoors. Just be sure to position it above ground in an area with good drainage and on a level, continuous surface which can support the weight of the spa when fille...

  • Page 7: Installation

    5 installation electrical precautions (continued) caution do not apply electrical power to the spa unless it is filled with water to the normal water level, which is approx. 6" below the spa rim (see location of water level indicator on face of skimmer on page 7). If the spa’s motor/pumps are actuat...

  • Page 8: Installation

    Installation indoor installations water which splashes on the floor during use of the spa may cause a walking hazard and/or structural dam- age unless good drainage is provided and proper waterproof building materials are used in the area sur- rounding and beneath the spa. Take into consideration, a...

  • Page 9: Installation

    7 installation equipment set-up 1.Remove the plastic sheet covering the spa. Use care; stepping into the spa with shoes will scratch the acrylic surface. 2.Remove any packing materials from the spa. 3.Remove each filter cartridge from its plastic bag. 4. Pull open each skimmer/filter door by the han...

  • Page 10: Operating Instructions

    8 operating instructions now that your venterra spa is in place, you are probably eager to take advantage of its unique designed-in features—especially the patented jacuzzi whirlpool bath hydromassage performance. Besides being a beautiful addition to your indoor decor or outdoor landscaping, your j...

  • Page 11: Operation

    Operation basic control set-up (continued) • open the skirt door giving access to the electrical cabinet. • your spa is provided with a ground fault circuit inter- rupter (gfci). At initial start-up and at least once a month thereafter, with the plug connected to power, push the test button located ...

  • Page 12: Operation

    Acc (accessory) the acc (accessory) switch controls these func- tions in the continuous sequence indicated: 1. Off 2. Air 3. Air/light 4. Light when the air (blower function is activated, thejets will tyrn off if they have been selected by the system switch. Activating the air function will also tur...

  • Page 13: Temperature Control

    Temperature control turn on the heater by selecting the htr/filter mode with the system switch. With this selection, you can verify that the spa’s heater is operating by viewing the indicator light on the spa control panel. Set the heater knob by rotating it to the desired temperature. When the wate...

  • Page 14: Operation

    Operation normal operation whirlpool system: you can enjoy the aero plus spa with or without activat- ing the whirlpool. Either way, bathing in your spa can be pleasurable, as well as therapeutic. After a busy, stressful day, you can look forward to soaking in your spa in still water with no turbule...

  • Page 15: Maintenance

    Maintenance water quality and water chemistry maintaining water quality and water chemistry in your spa is extremely important and should be a regular part of your spa maintenance program, as a neglected spa can be a breeding place for dangerous bacteria. The water quality of your spa is maintained ...

  • Page 16: Maintenance

    Maintenance water chemistry (continued) disinfecting: when filling the spa for the first time, follow the purge/ sanitizing instructions in the equipment set-up proce- dure of the installation instructions. Add a disinfectant to the water on a regular basis to help control the amount of bacteria, al...

  • Page 17: Filter Maintenance

    Filter maintenance the filters should be checked periodically. In normal use, check the filters at least once a month. Keep the filters clean; obstructed filters reduce water quality and inhibit proper system performance. A removable filter cartridge is located inside each skimmer. To remove it, pul...

  • Page 18: Maintenance

    Maintenance phillips screws skirt section automatic filtration/maintenance if you plan to be away, you should maintain minimum water quality by running the filter system. To do this, set the timer to turn the system on for at least two hours each day. This will cause the filter system to turn on at ...

  • Page 19: Maintenance

    Maintenance spa light two colored lenses are provided with your spa. To change the lens, simply pull the lens out of the fitting and replace it with the desired colored lens. Two replace- ment bulbs (#912) are also included. Put them in a safe place for future use. When a bulb burns out, replace it ...

  • Page 20: Troubleshooting Guide

    2. Heater not functioning. 18 troubleshooting guide problem probable cause *note: the skills and tools necessary for the safe repair of this spa require the services of qualified service personnel. Contact your dealer. A. Actuated too rapidly 3. Heater not functioning but heater light on. A. Heater ...

  • Page 21: Troubleshooting Guide

    Troubleshooting guide problem 7. No water flow from jets. A. Unit not plugged in. B. Selector switch in off. C. House circuit breaker tripped; no power to system. D. Spa circuit breaker tripped. E. High temperature safety switch tripped. F. Gfci tripped. G. Faulty pump or motor. A. Plug unit in. B. ...

  • Page 22: Troubleshooting Guide

    I. Subnormal voltage. J. Locked shaft or impeller. K. Motor windings burned out. L. Defective starting switch inside motor. 11. Motor stops. A. Motor overload condition. B. Selector switch failure. C. Relay failure. D. Inadequate supply wiring. E. High temperature safety switch tripped. 12. Air blow...

  • Page 23

    Alternate use of water rainbow spout as fill spout you can use your water rainbow spout as a fill spout by permanently plumbing it to a fresh water supply if local codes permit. Local plumbing codes may require the use of an anti-siphon valve for such a connection. Do not interconnect water supply w...

  • Page 24

    Jacuzzi whirlpool bath has obtained applicable code (standards) listings generally available on a national basis for products of this type. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product. Jacuzzi whirlpool bath makes n...