1. DL manuals
  2. Jacuzzi
  3. Hot Tub
  4. Allusion 6636
  5. Installation & Operation Instructions

Jacuzzi Allusion 6636 Installation & Operation Instructions

Summary of Allusion 6636

  • Page 1

    Designer/luxury bath series installation / operation instructions installer: leave this manual for homeowner. Homeowner: read this manual and keep for future reference. © 2005 jacuzzi whirlpool bath k339000x 3/06 owner's record save these instructions for future use. Complete and mail-in the product...

  • Page 2: Save These Instructions

    English important safety instructions read and follow all instructions save these instructions instructions pertaining to a risk of fire, electric shock, or injury to persons warning — when using this unit, basic precautions should always be followed, including the following: danger: —to reduce the ...

  • Page 3: Installation  Instructions

    English product specifications are subject to change without notice. Use installation instructions supplied with product. The company has obtained applicable code (standards) listings generally available on a national basis for products of this type. It is the responsibility of the installer/owner t...

  • Page 4: Contents

    English safety instructions _____________________________________________________________________ 2-3 contents _____________________________________________________________________________ 4 specifications _________________________________________________________________________ 5-8 roughing-in refe...

  • Page 5: Specifications

    English important: read complete instructions before beginning installation. Each whirlpool bath arrives ready for installation, completely equipped with motor/pump assembly, heater, plumb- ing, and fittings necessary for whirlpool operation. An optional drain/overflow kit is available for installat...

  • Page 6

    English specifications (rectangular) lh = left hand, rh = right hand for all units: electrical service requirements: all require a dedicated gfci protected separate circuit. Rapidheat tm : 120 vac, 15 amp, 60 hz. Dedicated gfci protected separate circuit. Motor/pump: 120 vac, 20 amp, 60 hz. Dedicate...

  • Page 7

    English oval & round baths drain/overflow a b model product weight operating gallonage total weight/ floor loading dimensions drain/overflow dimensions skirt & mounting cutout cortina™ rh venicia™ rh 72" (1829 mm) l 72" (1829 mm) w 22-1/4" ( 565 mm) h 1293 lb (588 kg)/ 36 lb/ft 2 (176 kg/m 2 ) 100 u...

  • Page 8

    English 8 jacuzzi whirlpool bath k339000x 3/06 corner baths specifications (corner) lh = left hand, rh = right hand model total weight/ floor loading dimensions drain/overflow dimensions cutout bellavista tm corner rh 60" (1524 mm) l 60" (1524 mm) w 21-3/4" ( 553 mm) h 1046 lb (475 kg)/ 42 lb/ft 2 (...

  • Page 9

    English roughing-in reference (rectangular) some tubs are supplied with cutout and/or undermount template. Refer to cutout on pages 6-8 for template part numbers. * add 1/4" to this dimension when roughing-in for 3-wall niche. Note: 1. Measurements inside each unit represent cutout in floor to allow...

  • Page 10

    English roughing-in reference (rectangular) some tubs are supplied with cutout and/or undermount template. Refer to cutout on pages 6-8 for template part numbers. * add 1/4" to this dimension when roughing-in for 3-wall niche. Note: 1. Measurements inside each unit represent cutout in floor to allow...

  • Page 11

    English 10-1/2" 36" 14" 5-1/4" 42" 72" 3" 18" x 4"* motor opt. Service access 12" h x 18" l service access heater reÁl™, right hand sabella™ right hand 72" 10-1/4" 36" 3" 1" 3" 3" 1" 7" 47" 13-3/4" 18" x 4" heater motor opt. Service access 12" h x 18" l service access 72" 36" 18" torretta™ 36, left ...

  • Page 12

    English roughing-in reference (oval) some tubs are supplied with cutout and/or undermount template. Refer to cutout on pages 6-8 for template part numbers. Note: 1. Measurements inside each unit represent cutout in floor to allow for drain/overflow. 2. All measurements are in inches. To convert to m...

  • Page 13

    English roughing-in reference (round, corner) some tubs are supplied with cutout and/or undermount template. Refer to cutout on pages 6-8 for template part numbers. Note: 1. Measurements inside each unit represent cutout in floor to allow for drain/overflow. 2. All measurements are in inches. To con...

  • Page 14: Installation Instructions

    English framing and support the drain/overflow of the bath extends below the bottom of the bath. Note that this requires a cutout in the floor. The floor structure beneath the bath must be able to support a total weight of bath, water, and bather. Refer to the table under total weight for your model...

  • Page 15: Installation Instructions

    English 15 jacuzzi whirlpool bath k339000x 3/06 installation instructions service access for partially or fully sunken installations, allow for ac- cess to service connections. It is the installer's respon- sibility to provide sufficient service access. The recom- mended minimum dimensions allowable...

  • Page 16

    English 16 jacuzzi whirlpool bath k339000x 3/06 installation instructions installation clearance recommendations the installation clearance recommendations below are to ensure that installers have enough space to maneuver and insert tub. The designer/luxury line whirlpool tubs have electrical, plumb...

  • Page 17

    English 17 jacuzzi whirlpool bath k339000x 3/06 installation note that the motor/pump protrudes beyond the bath rim a maxi- mum distance of 1" (25,4 mm). Care should be used when lowering the tub into cutout to prevent injury to installer(s), finished surfaces, or tub and components. Clearance must ...

  • Page 18: Installation Instructions

    English 18 jacuzzi whirlpool bath k339000x 3/06 tm * install seperate gfci protected circuits, duplex recepts not provided heater electrical connection duplex recept.* 15 amp, 3 prong plug (heater) 20 amp, 3 prong plug (pump/motor) 4" min. Or in accordance with local building or electrical codes ele...

  • Page 19: Plumbing and Water Supply

    English 19 jacuzzi whirlpool bath k339000x 3/06 drain information a drain/overflow assembly (sold separately) must be in- stalled on the bath, water tested, and connected to the sani- tary system of the house. After opening the carton, inspect for damage and verify that the kit is of the proper fini...

  • Page 20

    English 20 jacuzzi whirlpool bath k339000x 3/06 operation note: these instructions pertain to all bath products manufactured by jacuzzi whirlpool bath. Not all features dis- cussed in this instruction pamphlet apply to all baths. All baths manufactured by jacuzzi whirlpool bath are designed for "fil...

  • Page 21

    English 21 jacuzzi whirlpool bath k339000x 3/06 electronic control panel operation (with optional chromotherapy/illumatherapy tm lighting) all tubs in this product line come with electronic controls and standard chromotherapy or illumatherapy tm . Read and follow the operation instructions for the c...

  • Page 22

    English 22 jacuzzi whirlpool bath k339000x 3/06 rapidheat tm these units have a rapidheat tm heater installed on the intake or discharge lines. The heater will help maintain the temperature of the water in the bath. Operation with the heater installed and the whirlpool pump is operating, the heating...

  • Page 23

    English 23 jacuzzi whirlpool bath k339000x 3/06 spinning jets maintenance (models equipped with spinning jets) if hair or other kind of debris gets caught in the bearings of these jets, it could cause them to stop spinning. This may require disassembly and cleaning. To do this, simply grab the nozzl...

  • Page 24

    English 24 jacuzzi whirlpool bath k339000x 3/06 suction/intake cover/strainer maintenance clean the suction/intake cover/strainer of hair and debris when necessary. To do this, remove the center screw and detach the square cover. Clean the cover by backflushing debris from the holes. Replace the suc...

  • Page 25

    English 25 jacuzzi whirlpool bath k339000x 3/06 general whirlpool bath troubleshooting guide probable causes problem remedy pump/motor does not start. Pump/motor operates but no fully adjustable jets are functioning. Pump/motor operates but air is not injected into water. Water leakage from pump uni...

  • Page 26: Addendum

    Addendum 8-button electronic control panel for the 240 v control system electrical requirements the addendum for the 8-button electrical control panel is attached to the luxury ® salon ™ installation and operation instructions, el21000b. It provides the electrical requrements for the 240 v control s...

  • Page 27

    Jacuzzi™ addendum, control panel electrical requirements page 2 of 2 publication gr86000a • 08-08 heater h 2" l 4" w blower motor side view end view allusion pump motor, blower service access (required) front heater blower motor heater service area motor service area 12" 18" 18" caution: install all...

  • Page 28

    English 26 jacuzzi whirlpool bath k339000x 3/06 authorized service if you need a referral for a service company near you, or need assistance with operation or maintenance related questions, please call our service support department at 1-800-288-4002. Visit our web site at http://www.Jacuzzi.Com/ fo...

  • Page 29

    Warranty coverage jacuzzi whirlpool bath (the “company”) offers the following express limited warranty to the original purchaser of any jacuzzi whirlpool bath designer collection bath product (“unit”) who purchases the product for personal or single family use (“user”). The company will repair or re...

  • Page 30

    Responsibilities of others inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user. They are responsible for ensuring the unit is free of defect or damage. Notices are placed on and in the unit and on the shipping carton ...