Jacuzzi Faucet Kit Installation Instructions Manual
The Water Rainbow fi ll spout/faucet kit is designed
for installation on most Jacuzzi Whirlpool Bath
products or on any bath having suffi cient rim space
for mounting. The installation procedure requires
drilling holes in the bath shell, mounting fi ttings,
and making the proper water supply connections
to the faucet valves and fi ll spout. Hole drilling
templates and instructions are provided here for
this purpose.
Contents of Kit: Water Rainbow fi ll spout as-
sembly, faucet handles with inserts--hot (red dot)
and cold (blue dot), faucet valve assembly (2),
1/4-20 x 1-1/2" hex bolt with/washer and locknut
(2), 1-1/2" diameter. push-on speednut (2), faucet
handle gasket (2), #10-24 x 3/8" PHPM screw (2),
cartridge valve wrench with instructions.
Preparation
Locate the area on the bath or spa rim where
the Water Rainbow and faucet valves are to be
installed. For separated valve installations, refer to
illustrations B and G; for paired valve installations,
refer to illustrations C and H.
For installation on all baths, locate the Water Rain-
bow fi ll spout and valves on a level surface which
will allow water to clear the rim and fl ow directly into
the bath (see illustration A). Also be certain the fi ll
spout has easy access and that there is adequate
space for plumbing connections to the fi ll spout,
both before and after installation. (Refer to plumb-
ing instructions regarding top access installation,
illustration M.)
Dry fi t the Water Rainbow fi ll spout and valves in
the desired area (before drilling holes) to be sure
the location is appropriate.
Drilling Holes
Detach the templates (on back page) and tape
them onto the acrylic surface of the bath rim, lo-
cating the center lines of the fi ll spout and valve
holes according to appropriate dimensions given
in Illustration B or C.
Note: To insure template has been printed to
scale, measure the 2 1/2" spacing from center
Fill Spout mark and 9/32" hole mark for the 1/4
- 20 Hex Bolt anchors.
IMPORTANT: Read all instructions before beginning installation. Consult local codes for requirements.
Water Rainbow™ Fill Spout/Faucet Kit
Installation Instructions
LOCATE FILL SPOUT
ON TOP OF BATH
RIM TO ALLOW
DIRECT WATER
FLOW INTO BATH
INSIDE OF
BATH
RIM
1/4" MIN.
A
INTERIOR OF
BATH OR SPA
1-1/2" DIA.
1/2"
15/64" DIA.
1-3/8" DIA.
15/64" DIA.
2-1/2"
2-1/2"
1/2"
9/32" DIA.
15-64"
HOLE DRILLING SCHEME FOR WATER RAINBOW
SPOUT AND FAUCETS - PAIRED VALVE CONFIGURATION
C
1-1/2" DIA.
15/64"
3"
11/16"
COLD
HOT
FAUCET
HOLES
9/32" DIA.
7"
HOLE FOR
FILL SPOUT
INTERIOR OF
BATH OR SPA
1-1/2" DIA.
1/2"
15/64" DIA.
15/64" DIA.
1-3/8" DIA.
15/64" DIA.
7"
2-1/2"
2-1/2"
7"
11/16"
15/64" DIA.
15/64" DIA.
15/64" DIA.
1-1/2" DIA.
HOT WATER
FAUCET HOLE
9/32" DIA.
9/32" DIA.
15/64" DIA.
COLD WATER
FAUCET HOLE
HOLE FOR FILL SPOUT
HOLE DRILLING SCHEME FOR WATER RAINBOW
SPOUT AND FAUCETS - SEPERATE VALVE CONFIGURATION
B
1/2"
WATER RAINBOW FILL SPOUT
AND FAUCET HANDLES
Jacuzzi Whirlpool Bath 6683000G 8/06