- DL manuals
- Jacuzzi
- Hot Tub
- J - 400 SERIES J - 465
- Owner's Manual
Jacuzzi J - 400 SERIES J - 465 Owner's Manual
Summary of J - 400 SERIES J - 465
Page 1
Owner’s manual j - 4 0 0 ™ s e r i e s j - 460 j - 465 j - 470 j - 480 2530-442u rev. A.
Page 2: Addendum
Addendum jacuzzi j-400 series owners manual, #2530-442u your new hot tub includes one of two stereo remote styles. Both remotes function 100% identically and contain only minor cosmetic differences outlined below: style a style b 6530-822 rev.A = cosmetic differences between remotes 1. The hand held...
Page 3: Automated Spa Operations
Attention new spa owner! Congratulations on the purchase of your new jacuzzi® spa! The following is a list of automated functions performed by your spa. These functions are listed below in an attempt to suppress any operational concerns you may have during the first 24 hours of ownership! Also liste...
Page 4
Table of contents 1.0 important spa owner information ......................................................... 1 2.0 fcc notice ............................................................................................... 1 2.1 industry canada (ic) information .......................................
Page 5
11.0 heating modes ....................................................................................... 37 11.1 standard mode (factory default) ............................................................ 37 11.2 economy mode...........................................................................
Page 6: J-400 Series
Page 1 j-400 series 1.0 important spa owner information your jacuzzi® spa is constructed to the highest standards and is capable of providing many years of trouble-free use. However, because heat retentive materials are utilized to insulate the spa for efficient operation, an uncovered spa surface d...
Page 7: J-400 Series
Page 2 j-400 series 3.0 important safety instructions for all spa owners read and follow all instructions carefully! This spa was manufactured to meet the standards and specifications outlined in the “virginia graeme baker pool and spa safety act” (vgb safety act). When installing and using this spa...
Page 8: J-400 Series
Page 3 j-400 series on the grounding lug, inside the equipment compartment on the equipment box. A grounding wire connector is provided on this unit to connect a • minimum no. 8 awg (8.4 mm²) solid copper conductor between this unit and any metal equipment, metal enclosures of electrical equipment, ...
Page 9: J-400 Series
Page 4 j-400 series 6. ! Warning: risk of severe injury or death! Since excessive water temperatures have a high potential for causing • fetal damage during the early months of pregnancy, if pregnant or possibly pregnant, consult your physician before using a spa. Pregnant or possibly pregnant women...
Page 10: J-400 Series
Page 5 j-400 series 9. Caution: to decrease risk of product damage. Maintain water chemistry in accordance with manufacturer’s • instructions. Proper chemical maintenance of spa water is necessary to maintain • safe water and prevent possible damage to spa components. 10. Note: this spa is not inten...
Page 11: J-400 Series
Page 6 j-400 series 3.1 entrapment risk the consumer products safety commission/usa has reported that users of pools and spas have become entrapped (stuck) to drain and/or suction fittings causing death, drowning, or serious injury (see diagram below). This spa was manufactured to meet the standards...
Page 12: J-400 Series
Page 7 j-400 series 3. ! Danger: risk of severe injury or drowning! Body entrapment: may occur when part of the torso becomes entrapped, inserted or sucked into a suction or outlet opening. Never allow children to play or get near the suction fittings, suction • covers, filter, filter lid or skimmer...
Page 13: J-400 Series
Page 8 j-400 series 3.3 important csa safety instructions (canada only) when using this electrical equipment, basic safety precautions should always be followed, including the following: 1. Read and follow all instructions. 2. A green colored terminal or a terminal marked g, gr, ground, grounding or...
Page 14: J-400 Series
Page 9 j-400 series warning: for spas that are to rest on balconies, roofs or other platforms not specifically tied into main structural support, consult a professional structural engineer with experience in this type of application. ! The spa must be installed in such a manner as to provide drainag...
Page 15: J-400 Series
Page 10 j-400 series 4.2 indoor location for indoor installations many factors need to be considered before installing a spa indoors. Proper foundation: • consult a structural engineer when considering a foundation that will adequately support the spa the entire time it is in place. Proper support i...
Page 16: J-400 Series
Page 11 j-400 series 5.0 general electrical safety instructions your new jacuzzi® spa is equipped with the j-1000™ system. It contains the most advanced safety and self- protective equipment in the industry. Nonetheless, this spa must be installed properly to ensure dependable usage. Please contact ...
Page 17: J-400 Series
Page 12 j-400 series all wiring must be copper to ensure proper connections. • do not use aluminum wire. When using wire larger than #6 (10 mm²), add a junction box near • the spa and reduce to short lengths of #8 (8.4 mm²) wire to connect to the spa. 4. The electrical supply for this product must i...
Page 18: J-400 Series
Page 13 j-400 series figure a equipment area 10 4 2 2 flow note: pump locations vary by model 5 6 6 9 8 7 6 3 1 11 1. Control box 2. Power supply entrance(s) 3. Jet pump #1 4. Heater 5. Spa drain valve 6. Pump drain plugs(s) 7. Jets pump #2 8. Filter/circulation pump 9. Optional cd ozonator (purchas...
Page 19: J-400 Series
Page 14 j-400 series blk red red red blk blk 1 2 figure-c tb1 to circuit board power in green tb3 1 2 blue blue brown brown figure-d tb1 to circuit board power in green tb3 all north american 240v models: 240 vac, 3-wire connection 60 hz all export models: 230 vac, 3-wire connection 50 hz 7.0 power ...
Page 20: J-400 Series
Page 15 j-400 series export j-460/j-465/j-470/j-480 models (50hz) voltage: 230 vac 230 vac 230 vac max. Current draw: 16a 21a 29a frequency: 50 hz 50 hz 50 hz number of wires: 3 3 3 circuit breaker (2-pole): 20a* 30a** 40a*** * in 20a configuration, the heater will not operate while either jets pump...
Page 21: J-400 Series
Page 16 j-400 series • ! Warning: to decrease risk of infection or disease. Fill hot tub with clean tap water from garden hose, to reduce risk of contracting a waterborne illness (e.G. An infection, bacteria or virus) and/or respiratory ailments. Fill until water covers all jets but does not touch t...
Page 22: J-400 Series
Page 17 j-400 series 7. Set spa to heat to warm spa water to a comfortable temperature, follow these steps: • the lcd display on the control panel displays the actual temperature of the spa water. Press either the cooler or warmer button once to display the “set” temperature for 5 seconds. If you wa...
Page 23: J-400 Series
Page 18 j-400 series 1. Add 2.5 ounces of sodium dichlor for every 100 gallons of water. Refer to the table below for approximate water fill volume by model. Caution: risk of personal injury or spa damage! Never add chlorine tablets (trichlor) or acid to your hot tub for any reason! These chemical m...
Page 24: J-400 Series
Page 19 j-400 series caution: to decrease build up on components and minimize acrylic damage. Never fill with water from a water softener. If your water is extremely “hard”, it is preferable to fill half-way with hard water and the rest of the way with softened water. You may fill entirely with hard...
Page 25: J-400 Series
Page 20 j-400 series 9.0 control functions 9.1 control panel a. Select button: filter cycle programming features. Pressing the select button also allows you to turn on/off the circulation pump, when it is in an off state. If the circulation pump was turned on automatically, it cannot be manually tur...
Page 26: J-400 Series
Page 21 j-400 series 9.2 lcd display = lock: indicates panel, set temperature, or filter cycle programming is locked. = heat: indicates heater is on. = ozone: indicates optional cd ozonator is on. = adjust filter cycle: indicates filter cycle programming feature is accessed. = filter cycle number: i...
Page 27: J-400 Series
Page 22 j-400 series 9.3 j-480 spa features 1 2 3 4 5 9 10 11 7 3 4 5 12 13 8 5 5 4 4 3 7 6 6 6 6 14 15 19 18 16 24 3 22 25 21 21 21 21 17 17 17 20 20 23 control panel 1. Waterfall control valve 2. Air control valves (4 ea.) introduce 3. Air to specified jet groups (page 30) optional audio system sp...
Page 28: J-400 Series
Page 23 j-400 series 9.4 j-470 spa features control panel 1. Waterfall control valve 2. Air control valves (4 ea.) introduce 3. Air to specified jet groups (page 32) optional audio system speakers 4. (4 ea.) adjustable pillows (4 ea.) 5. Lighted cup holders ( 6. 4 ea.) massage selectors (2 ea.) cont...
Page 29: J-400 Series
Page 24 j-400 series control panel 1. Waterfall control valve 2. Air control valves (3 ea.) introduce 3. Air to specified jet groups (page 34) optional audio system speakers 4. (4 ea.) adjustable pillows (4 ea.) 5. Lighted cup holders ( 6. 3 ea.) massage selectors (1 ea.) controls 7. Specified jet g...
Page 30: J-400 Series
Page 25 j-400 series control panel 1. Waterfall control valve 2. Air control valves (4 ea.) introduce 3. Air to specified jet groups (page 36) optional audio system speakers 4. (4 ea.) adjustable pillows (4 ea.) 5. Lighted cup holders ( 6. 2 ea.) massage selector (1 ea.) controls 7. Specified jet gr...
Page 31: J-400 Series
Page 26 j-400 series 10.0 operating instructions your jacuzzi® spa has a touch-sensitive control panel, massage selectors, and air control knobs located on the top rim of the spa (pages 22-25). These controls let you operate many of the special functions of your jacuzzi spa. By familiarizing yoursel...
Page 32: J-400 Series
Page 27 j-400 series 10.6 light mode button this button offers 4 light modes for your enjoyment. Press this button to select your favorite lighting effect as follows: press once press again press again press again solid color mode: selects one of 7 solid (high-intensity) colors of choice. Amber (x7)...
Page 33: J-400 Series
Page 28 j-400 series 10.10 watercolour™ waterfall control turn waterfall control valve (pages 29-36) counterclockwise to increase waterfall output. Turn control valve clockwise to decrease or turn off waterfalls. 10.11 air controls certain jet systems have their own air control. Each control introdu...
Page 34: J-400 Series
Page 29 j-400 series 1a 1a 1b 2b 2b 2a 2a 2a 1 3 3 5 5 5 2 4 4 massage selectors (1-2) • massageselector1divertspump2outputbetweenjetsgroups1a-1b. • massageselector2divertspump1outputbetweenjetgroups2a-2b. Waterfall selector (3) • waterfallselector3controlscirculationpumpoutputtowaterfalls. Massage ...
Page 35: J-400 Series
Page 30 j-400 series 1 1 2 2 2 2 3 4 4 4 4 4 3 1 2 3 4 air controls operation • rotate air controls 1-4 to add air to designated jet groups. • center footwell ix jet draws air at all times when jets pump 1 is running. This jet has no air control. 10.14 j-480 air controls diagram spa operation subjec...
Page 36: J-400 Series
Page 31 j-400 series 1a 1b 2b 2b 2a 2a 1 3 3 5 5 5 2 4 4 massage selectors (1-2) • massageselector1divertspump2outputbetweenjetsgroups1a-1b. • massageselector2divertspump1outputbetweenjetgroups2a-2b. Waterfall selector (3) • waterfallselector3controlscirculationpumpoutputtowaterfalls. Massage select...
Page 37: J-400 Series
Page 32 j-400 series 1 2 3 4 4 3 1 2 3 1 1 4 1 air controls operation • rotate air controls 1-4 to add air to designated jet groups. • center footwell ix jet draws air at all times when jets pump 1 is running. This jet has no air control. 10.16 j-470 air controls diagram spa operation subject to cha...
Page 38: J-400 Series
Page 33 j-400 series 1a 1b 1b 1b 4 4 4 4 4 1 2 3 3 2 massage selectors (1) • massageselector1divertspump1outputbetweenjetsgroups1a-1b. Massage selector (2) • massageselector2controlspump1outputtofootwellixjet. Waterfall selector (3) • waterfallselector3controlscirculationpumpoutputtowaterfall. Jets ...
Page 39: J-400 Series
Page 34 j-400 series 1 1 2 2 2 2 2 3 3 3 1 3 2 air controls operation • rotate air controls 1-3 to add air to designated jet groups. 10.18 j-465 air controls diagram spa operation subject to change without notice..
Page 40: J-400 Series
Page 35 j-400 series 1a 1b l k 1 4 4 1a 4 4 4 3 3 2 2 massage selector (1) • massageselector1divertspump1outputbetweenjetsgroups1a-1b. Massage selector (2) • massageselector2controlspump1outputtofootwellixjet. Waterfall selector (3) • waterfallselector3controlscirculationpumpoutputtowaterfall. Jets ...
Page 41: J-400 Series
Page 36 j-400 series l k 4 4 3 3 5 3 3 1 1 2 2 2 4 air controls operation • rotate air controls 1-4 to add air to designated jet groups. • center footwell ix jet (5) draws air at all times when jets pump 1 is running. This jet has no air control. 10.20 j-460 air controls diagram spa operation subjec...
Page 42: J-400 Series
Page 37 j-400 series 11.0 heating modes the control system in your spa activates a programmable “standard” or “economy” mode which effects when the heater operates. Refer to sections 11.1 and 11.2 below for additional information. 11.1 standard mode (factory default) standard mode is typically selec...
Page 43: J-400 Series
Page 38 j-400 series 12.0 programming instructions 12.1 programming filter/circulation pump run time the sentry control system allows you to easily adjust two separate aspects of filter/circulation pump operation: 1. The time of day (start time) the filter/circulation pump turns on. 2. The length of...
Page 44: J-400 Series
Page 39 j-400 series when in a summer logic condition is active (see note below), the filter/ circulation pump will turn on for all programmed filter cycles. Summer logic: in warm weather, the water temperature in the spa may exceed the set temperature. This condition may occur due to heat transfere...
Page 45: J-400 Series
Page 40 j-400 series when a programmed filter/heating cycle activates, the lcd screen displays the following message: 1* at any time, you may check the programming of any aspect of any filter/ heating cycle by first pressing cycle button then moving through the menu by pressing either cycle or selec...
Page 46: J-400 Series
Page 41 j-400 series 12.5 locking filter cycles you may keep all filter cycle programs from being inadvertently altered by electronically “locking” them. • to lock all filter cycles: press cycle button, then within 30 seconds, press display , mode and warmer buttons within five seconds each. A padlo...
Page 47: J-400 Series
Page 42 j-400 series programming instructions 1. Press the cycle button 2 times. The main display reads “fil” indicating the “change filter” display program has been accessed. 2. Press select button once to display the currently programmed duration or to view days elapsed since last filter cleaning ...
Page 48: J-400 Series
Page 43 j-400 series 13.0 spa maintenance proper and regular maintenance of your spa will help it retain its beauty and performance. Your authorized jacuzzi dealer can supply you with all the information, supplies, and accessory products you will need to accomplish this. Danger: risk of severe injur...
Page 49: J-400 Series
Page 44 j-400 series to ensure optimum performance, the 24-hour proclear™ ii skimming filter cartridge (a) must be cleaned every three months and replaced once a year. The secondary proclear™ plus polishing filter bag (b) should be emptied weekly and replaced every 3 months. The proclear™ ii filter ...
Page 50: J-400 Series
Page 45 j-400 series 6. Clean the proclear filter cartridges with a garden hose and high pressure nozzle. Rinse debris from the filter pleats beginning at the top and working your way downward. Continue, one section at a time until you have cleaned all debris from the filter pleats. When replacing t...
Page 51: J-400 Series
Page 46 j-400 series 5. Pull the larger (rear) body outward as shown to open drain. 6. After the spa drains, perform steps 2-5 in reverse order to close the drain prior to refilling spa. After refilling, turn on power to the spa and follow the steps listed under “spa fill up procedures.” (page 15). ...
Page 52: J-400 Series
Page 47 j-400 series against deterioration caused by uv rays from the sun. Never allow anyone to stand or sit on the cover, and avoid dragging it across rough surfaces. 13.7 winterizing your jacuzzi spa is designed to automatically protect itself against freezing when operating properly. During peri...
Page 53: J-400 Series
Page 48 j-400 series consult your jacuzzi dealer if you have any questions regarding winter use or winterizing. 13.8 restarting your spa in cold weather if you want to start up your spa after it has sat empty for a time in freezing temperatures, be aware that the water remaining in certain sections ...
Page 54: J-400 Series
Page 49 j-400 series 14.0 water quality maintenance to decrease the risk of contracting a waterborne illness (e.G. An infection, bacteria or virus) and/or respiratory ailments, maintain water quality within specified limits. This will enhance your enjoyment and prolong the life of the hot tub’s equi...
Page 55: J-400 Series
Page 50 j-400 series when adding spa shock (chlorine or non-chlorine) or ph balancing chemicals activate the jets pump(s) and leave the spa cover open for a minimum of 20 minutes. By doing this you will allow excessive chemical vapors to exit the spa, protecting pillows and plastic knobs from chemic...
Page 56: J-400 Series
Page 51 j-400 series 15.0 troubleshooting - display messages there are a number of unique functions designed into your jacuzzi spa to protect it from damage and/or to aid in troubleshooting. Following is a listing of all the possible messages along with their meanings: message meaning overheat prote...
Page 57: J-400 Series
Page 52 j-400 series freeze protection a potential freeze condition has been detected. No action is required. Jets pump(s) operate until the spa is out of danger. It is possible to manually turn off pump 1 and pump 2, but if after 2 hours ice is still detected, pumps will automatically turn back on....
Page 58: J-400 Series
Page 53 j-400 series 16.0 troubleshooting - procedures in the unlikely event your spa is not working the way you believe it should, please first review all the installation and operating instructions in this manual and check the message on the panel display; second, if you are still not satisfied it...
Page 59: J-400 Series
Page 54 j-400 series poor jet action (see page 29-36) 1. Make certain the jets pump is turned on. 2. Check position of massage selectors. 3. Open air control for selected jet system. 4. Check for adequate water level. 5. Check for dirty filter (page 43). Water is too hot 1. Reduce thermostat setting...
Page 60: J-400 Series
Page 55 j-400 series 17.0 north american 60 hz j-460/j-465/j-470/j-480 wiring diagram k13 j8 j6 j7 12v ac output power to lighting controller . T ransformer t1 k1 k2 k3 k4 k5 k6 j4 j3 k7 k8 options sensors lcd panel flow switch hi-limit/freeze sensor temperature sensor led lighting controller this d...
Page 61: J-400 Series
Page 56 j-400 series 18.0 export 50 hz j-460/j-465/j-470/j-480 wiring diagram k13 j8 j6 j7 12v ac output power to lighting controller . T ransformer t1 k1 k2 k3 k4 k5 k6 j4 j3 k7 k8 options sensors lcd panel flow switch hi-limit/freeze sensor temperature sensor led lighting controller this device co...
Page 62: J-400 Series
Page 57 j-400 series red (l2) pigtail neutral bus ground tb2 tb1 black (l1) green main service panel with gfci 2-pole gfci breaker ground/bonding lug** 2-pole circuit breaker with 2-wire grounded load connection (3 wires to hot tub, 2-hot (l1-l2), 1-ground) white (n) black (l1) red (l2) 240 vac no l...
Page 63: J-400 Series
Page 58 j-400 series 20.0 optional jacuzzi j-1000 audio system™ stereo system features 20.1 sound system controls 1 2 17 3 9 8 7 5 4 6 10 11 13 15 12 16 14 1. Power on/off button 2. Tune/seek up/down button 3. Volume up/down button 4. Mode button 5. Sel/eq button 6. As/ps button 7. Mute button 8. Ba...
Page 64: J-400 Series
Page 59 j-400 series 20.2 sound system operation 1. Power on and off press power button (1) once to turn on stereo system. Press a second time to turn off. 2. Adjusting volume press vol up/down button (3) to increase or decrease volume. Current volume setting is briefly displayed (0 to 45). 3. Mute ...
Page 65: J-400 Series
Page 60 j-400 series 8. Adjusting fader level press eq button (5) repeatedly until display reads “fader.” press vol up/ down button (3) to choose desired set- ting. A display of “fader f-r” indicates center, r01 to 15 indicates rear fade, f01 to 15 indicates front fade. Note: unit returns to volume ...
Page 66: J-400 Series
Page 61 j-400 series 12. Open/close front panel press firmly on the release button (15), then open front panel (16) by gently lifting upward on bottom edge. To close front panel, gently flip panel down, then press firmly on panel directly above release button (15) until you hear an audible “click”. ...
Page 67: J-400 Series
Page 62 j-400 series 5. Accessing preset stations press and hold ent/sh button (9) until display reads “shift”. Repeatedly press tun up or down button (2) to choose preset 1-6, then press ent/sh button (9) to confirm selection. 20.4 j-1000™ audio system cd player operation 1. Insert, play, and eject...
Page 68: J-400 Series
Page 63 j-400 series press a second time to deactivate or press rdm button to cancel rpt function. 4. Searching file or folder in mp3/wma cd to search file in cdp (mp3/wma) mode: press as/ps button (6) to • enter track searching mode. Then press the vol up/down button (3) to scroll through available...
Page 69: J-400 Series
Page 64 j-400 series 2. Copying music files from usb to nand (internal memory) in usb mode, press and hold sel button (5) for about 2 seconds until “one copy” displays on lcd (17), then press vol up or down button (3) to choose one or all. Press ent button (9) to confirm selection. If one copy is se...
Page 70: J-400 Series
Page 65 j-400 series 20.6 j-1000™ audio system ipod operation 1. Play ipod open front panel (16) and plug a ipod into the ipod docking station (12) as shown. Refer to step 12 (page 61) for details. The ipod will begin to play automatically. Close front panel. The “ipod” symbol will display to indica...
Page 71: J-400 Series
Page 66 j-400 series 20.7 docking your ipod music player 1. Docking your ipod the docking station for ipod is compatible with all dockable apple ipod models. To install an apple ipod: a. Open docking station door (a) as outlined in step 12 (page 61). B. Center ipod over docking station interface por...
Page 72: J-400 Series
Page 67 j-400 series 20.8 generic mp3 player operation 1. Connecting your mp3 player a. The audio unit is equipped with an auxiliary audio input jack, that allows the user to listen to external source, such as an mp3 player. 2. Setting up the mp3 player for use a. Select preferred song/album/ playli...
Page 73: J-400 Series
Page 68 j-400 series 2. Fogged cds and lens this condition may occur when it’s cold. Wipe fogged cds with a soft cloth. Fogged optical components inside the unit will return to normal operation after an hour in a heated environment. 20.10 j-1000™ audio system stereo specifications tuner fm usable se...
Page 74: J-400 Series
Page 69 j-400 series 20.11 standard wireless remote control (included with optional j-1000 sound system) • usable range 15' (5m) • never leave the remote under the spa cover for any reason. • battery replacement: use coin type, cr2025 or equivalent. Wireless remote control command summary button ope...
Page 75: J-400 Series
Page 70 j-400 series button operation button operation auto auto button: scans through preset radio stations. 4 station 4 preset button: has no cd/radio function. Press and hold to set station 4 or pause ipod when docked in docking station. Audio audio button: selects treble, bass, fader or balance,...
Page 76: J-400 Series
Page 71 j-400 series 20.12 wireless remote battery replacement procedure 1. Start by removing the rubber cover to the remote (figure a). 2. Turn the remote unit over and locate the battery door (figure b). 3. Rotate the battery door, with a coin, counterclockwise until the dot aligns with the open a...
Page 77: J-400 Series
Page 72 j-400 series serial number: ___________________________ model name: ___________________________ dealer name: ___________________________ notes: ___________________________________ _________________________________________ _________________________________________ ____________________________...