Jacuzzi PALIO Owner's Manual - Operation
OPERATION
You can enjoy the Palio spa with or without activating
the whirlpool. Either way, bathing in your spa can be
pleasurable, as well as therapeutic.
For an invigorating spa experience, you can take
advantage of the built-in whirlpool system. To do this,
push the SYSTEM switch button to select the JETS
mode. Sit or recline in the spa so you are comfortable.
The fully adjustable whirlpool jet located on the wall
opposite the control panel can be adjusted to control the
force of the water coming into the spa. For stimulating
action, increase the force of the flow by rotating the jet
handle to the left. For a more relaxing effect, rotate the
handle to the right (clockwise). The directionally adjust-
able whirlpool jets can be directed toward any location
on the body, particularly toward any area that feels tense
or stiff. The warmth of the water and the stimulating
water flow from the jet will pleasantly increase circula-
tion.
Or, for the total whirlpool effect and all-over feeling of
well-being, you can adjust all jets so they point in a
clockwise or counter-clockwise direction to circulate the
air and water mixture in a circular motion all about the
spa.
Note: For maximum whirlpool jet flow, rotate the
Water Rainbow flow control handle upward to turn
off the flow through the spout.
FULLY ADJUSTABLE
WHIRLPOOL JET
Silent Air Induction
The intensity of the whirlpool action is determined by
how much air is inducted into the water. You have
control of this by adjusting the air induction control knobs
located on both control panels. For maximum air induc-
tion, rotate each control knob fully counter clockwise to
the largest circle. For fewer air bubbles, decrease the
amount of are induction by rotating the control knobs
clockwise. When the knobs are turned to the smallest
circles, only water is being circulated.
Normal Operation
Whirlpool System:
Air Blower
The Palio features a built-in air blower and factory
drilled air holes in the seats of the spa to add to your
enjoyment.
The blower sends air to a channel located under the
spa’s seats; this air is distributed through the air holes,
forming tiny bubbles which travel upward until they
reach the surface and burst. The exciting visual effect of
the bursting bubbles contributes to the overall hydro-
massage experience.
Activate the blower by pushing the ACCESSORY
switch. (Note that when the blower is on, the low speed
of the motor turns on to active the pump which allows
filtration of the water and use of the Water Rainbow
feature. However, while the blower is operating (in the
115V system), neither the jets nor the heater will func-
tion, If the heater mode has been selected, the heater
will come on again automatically when the blower is
turned off.)
Filtration
When you are ready to leave the spa, push the
SYSTEM switch button to turn off the whirlpool.
Water Rainbow
™
Spout
The Water Rainbow spout will add the soothing
sound of a waterfall to your bathing pleasure, as well as
provide beautiful cascades of shimmering water for an
exciting visual effect.
Activate the waterfall feature by first turning on the
JETS, HTR/FLTR, or FILTER function, then rotate down-
ward the flow control lever located on the left side of the
spout. Use this lever to adjust the amount of water
flowing through the Water Rainbow spout. The waterfall
effect will be greatest in the JETS mode. Turning off the
flow at the fully adjustable jet will dramatically increase
Water Rainbow flow.
CAUTION: The water circulating through the Water
Rainbow spout is not fresh water and therefore is
not suitable for drinking.
10
MAXIMUM
AIR OUTPUT
(COUNTER CLOCKWISE
ROTATION)
MINIMUM
AIR OUTPUT
(CLOCKWISE
ROTATION)