This manual contains important safety information. Please read carefully before product installation or use. Round eu44959 — round front elongated ev77959 — elongated front owner’s manual refresh personal hygiene system™ ex93000 refresh installation manual 10/06.
Important safeguards 1 mounting plate refresh remote control, mount kit, batteries t-valve with filter and bidet hose standard mounting hardware universal wrench alternate mounting hardware model rated power source tap water pressure rated power consumption seat temperature maximum spray volume seat...
Before installation 2 • flat head screwdriver • universal wrench (included) • phillips head screwdriver • measuring tape note: the included universal wrench will work for most applications. Depending on your toilet confi guration, an adjustable wrench may also be needed. Tools needed alternate mount...
Installation (continued) 3 4) connect t-valve and hoses 3) install mounting plate (continued) c) adjust mounting plate so length (l) between the front of the toilet bowl and the back of the mounting plate is as follows: round (eu44959): l=18¼" (465 mm) elongated (ev77959): l=20½"(495 mm) d) tighten ...
Installation (continued) 4 9) filling the reservoir 8) remote control installation a) identify a location for the remote control that is visible and reachable from the toilet and that does not obstruct the ir signal. Depending on your wall type, you can install the screws directly or use anchor moun...
Operation 5 some features of the refresh personal hygiene system™ are designed to function only when the seat is occupied. Using the refresh remote control adjusting seat, water, and dryer temperature warm water washing sit on the seat and press the front or back (either him or her) button to begin ...
Operation (continued) 6 setting the clock remote control beeping/silent modes auxiliary controls power save mode the refresh personal hygiene system™ includes a power saving feature to reduce electrical consumption when not in use. Once set, the power save function turns the refresh on and off each ...
Maintenance 7 1 2 3 4 5 6 1 2 3 4 5 6 t-valve filter: bidet-hose filter: 1) turn water supply valve off completely. 2) flush toilet to empty the water tank. (failure to do so could result in leaking or flooding!) 3) unscrew the filter from the t-valve. (the end not connected to a hose) 4) gently bru...
