Whirlpool bath r steam enclosure installation instructions.
Limited warranty and remedy jacuzzi whirlpool bath (the "company") warrants to the original purchaser ("user"), that the enclosures and frames supplied by it shall be free from material defects in material and workmanship for a period of one (1) year after purchase by the user, provided they are ins...
1 p arts list a. 1 ba th track b. 4 vinyl plugs d. 2 w all jambs e. 6 plastic w all plugs f. 2 pieces jamb vinyl g. 2 jamb fillers h. 6 #8 x 1-1/2" truss head screws i. 1 header j. 4 rollers k. 4 8-32 x 3/8" hex head screws l. 4 vinyl silencers m. 4 adhesive bumpers n. 4 trim rings o. 4 acr ylic t o...
Step 1 measure the wall to wall opening along the center of the bath rim. Use a hacksaw to cut the bath track 1/16" short of this dimension. Note: on some installations it may be necessary to file the ends of the track to match the wall conditions. Step 2 press the four vinyl plugs into both ends of...
3 step 4 position the wall jambs on each end of the bath track with notches in the bottom of the jambs pressed securely over the bath track. Use a level to plumb each wall jamb. Make a pencil mark on the wall through each of the holes in the wall jamb. Remove all parts and drill the walls in the loc...
4 step 7 all units are equipped with safety tee-lock jambs. When installed properly the header is permanently locked to the jambs and cannot be accidently dislodged. Slide the safety lock of the remaining wall jamb and jamb filler into the header. The rounded surface of the header goes to the exteri...
5 step 9 peel protective backing from the four adhesive bumpers and stick to top and bottom of the panel recess in the wall jambs. Lift the interior panel into position with the rollers engaging the roller slot in the header and the bottom fin inserted into the interior slot of the bath track. Repea...
Printed in the u.S.A. Product specifications are subject to change without notice. Use installation instructions supplied with product. Jacuzzi whirlpool bath has obtained applicable code (standards) listings generally available on a national basis for products of this type. It is the responsibility...
