1. DL manuals
  2. Jacuzzi
  3. Plumbing Product
  4. Vantage
  5. Installation Instructions Manual

Jacuzzi Vantage Installation Instructions Manual

Summary of Vantage

  • Page 1

    Dimensions 60" (1524 mm) l 32" ( 813 mm) w 84-1/2" (2146 mm) h product weight 238 lb (108 kg) operating gallonage 38 u.S. Gal (144 liters) total weight/ floor loading 805 lb (366 kg)/ 60 lb/sq. Ft. (293 kg/sq. M) motor/pump 115 vac 3450 rpm/10 amp 60 hz single phase electrical requirements 115 vac 1...

  • Page 2

    Important: read complete instructions before beginning installation. Remove the bath from the carton. Retain the shipping carton until satisfactory inspection of the product has been made. Do not lift the bath by the plumbing at any time; handle by the shell only. Immediately upon receipt, inspect t...

  • Page 3

    3 rough plumbing the locations of the valves, fill spout and shower head should be marked and drilled before the bath unit is placed in position. Where access to connections is limited, allow enough flexibility in the supply lines for easier positioning of the valves after the unit is in place. From...

  • Page 4

    4 suggested plumbing layout (reverse for right hand version) (for fixed shower head) 32" min. 42" max. Supply lines blocking line for body spray jets (if equipped) optica 300 mixer and transfer valve optica 300 connections rough-in plumbing details cold in hot in to fill spout to body spray jets (if...

  • Page 5

    5 service access service access is through the removable panel in the integral skirt. Allow a space of at least 8" away from the bath for skirt removal. The skirt is designed to accommodate the added height of the tile, linoleum or other floor coverings up to 1-1/4" above the floor, and will be flus...

  • Page 6

    ©1999 jacuzzi whirlpool bath p592000 8/13/04 jacuzzi whirlpool bath p.O. Box 702168, dallas, tx 75370-2168 service support: call (800) 288-4002 jacuzzi whirlpool bath has obtained applicable code (standards) listings generally available on a national basis for products of this type. It is the respon...

  • Page 7: Builder Group Bath Product

    Warranty coverage jacuzzi whirlpool bath (the “company”) offers the following express limited warranty to the original purchaser of any jacuzzi whirlpool bath builder group bath product (“unit”) who purchases the product for personal or single family use (“user”). The company will repair or replace,...

  • Page 8

    Responsibilities of others inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user. They are responsible for ensuring the unit is free of defect or damage. Notices are placed on and in the unit and on the shipping carton ...