Jaeger-leCoultre Master Compressor Diving Chronograph User Manual

Summary of Master Compressor Diving Chronograph

  • Page 1

    Introduction we congratulate you on the purchase of your jaeger-lecoultre watch and thank you for your confidence. Representing a new generation of divers’ watches, the master compressor diving watch is distinguished by its ultra-high resistance case. Perfectly suited to exploring the ocean depths, ...

  • Page 2

    Accuracy mechanical models with manual or automatic winding the accuracy of the mechanical movement models is determined by the balance. This makes 21,600 or 28,800 vibrations per hour, depending on the model (see technical characteristics). Despite all the care with which the jaeger-lecoultre maste...

  • Page 3

    M aster c ompressor d iving c hronograph technical characteristics - automatic movement, calibre 751d. - 28,800 vibrations/hour. - power reserve : approximately 65 hours. - crown with compression key. - pushpieces with compression wing-nut. - water resistant to 1000 metres. Movement use starting the...

  • Page 4

    Timing - pressing once on the pushpiece at 2 o’clock activates the chronograph. The central seconds hand turns, and the minute and hour totalising counters will be running. Pressing the pushpiece at 2 o’clock again will stop the chronograph and give a time reading. - reset by pressing the pushpiece ...

  • Page 5

    M aster c ompressor d iving gmt technical characteristics - mechanical automatic movement, calibre 975d. - 28,800 vibrations/hour. - power reserve : approximately 48 hours. - crown with compression key. - water resistant to 1000 metres. Movement functions and displays the master compressor diving gm...

  • Page 6

    Setting the date crown a turn the compression key to the “open” position in the direction of the arrow. Then pull crown a out to position 2. You may turn the crown in either direction, as the main hour hand and the date are driven either forward or backward depending on the chosen direction. Note th...

  • Page 7

    Hold the case in one hand, with the watch placed crystal down on a support. With the other hand grip the "fork" tool supplied with the watch, and slide it between the horn and wristlet, in order to grip the wristlet bar between the teeth of the fork. Make sure that the tool is cor- rectly positioned...

  • Page 8

    This international guarantee applies to jaeger-lecoultre products sold or presented for guarantee repairs in all countries except the united states of america and canada (for those two countries, see the limited warranty). The manufacturer’s international guarantee applies only to jaeger-lecoultre p...

  • Page 9

    The following limited warranty applies to jaeger-lecoultre products sold or presented for warranty repairs in the united states of america and canada only. The manufacturer’s limited warranty applies only to jaeger-lecoultre products purchased from authorised jaeger-lecoultre retailers. In addition,...