JAI CV-S3200 Operation Manual - page 11
11
CV-S3200/3300
Screen display (example)
To start adjustment, push the “FUNC” button. The menu will appear on the monitor . (See page 12)
Use “UP” or “DOWN” buttons to choose functions. To select function, press the “FUNC” button.
After selecting the function, press “UP” or “DOWN” buttons to choose mode. To select
mode, press the “FUNC” button.
To use One Push White Balance.
Go to the next function if needed, and repeat (b) to (c).
1. Change to White Balance mode by Function SW.
2. Change to One-push mode by Up or Down SW.
3. Push Function SW and make it READY.
4. Push Up SW, and One-Push White Balance function starts.
5. Push Function SW to save the data (R.B.Gain) of One-Push White Balance.
If you turn off the power without saving the data, it will return to the original status.
(a)
(b)
(c)
(d)
5-2-2. Operations
White balance Manual
Function buttons for on-screen-menu
Rear panel of CV-S3300 (example)
Red
Blue
Note : This scroll bar will be displayed when the following
functions are selected.
White balance = manual, AGC = manual, Iris = manual
5-3. RS 232C functions
White balance
Electronic shutter
Auto gain control
Back light compensation
Iris level
Gamma
Scanning reversal
Frame integration
:
:
:
:
:
:
:
:
To adjust the color temperature
To adjust the shutter speed
OFF, +12dB, +24dB, manual selectable
To create your own BLC pattern.
To adjust the video level
0.45, 0.60, 1.0 selectable
To select the scanning direction
To select the sensivity and mode
a)
b)
c)
d)
e)
f)
g)
h)
CV-S3200̲270021107ED10406
06.10.11, 9:41 AM
Page 11
Adobe PageMaker 6.5J/PPC