Jam Audio Jam plus HX-P240A User Manual And Warranty Information
HX-P240A
Where There’s A Jam,
There’s A Party!
™
READ UP.
PARTY DOWN.
HEY. HAVE WE SEEN YOU HERE BEFORE?
JUST CHARGE IT
CONTROL YOUR DESTINY...OR AT LEAST YOUR SPEAKER
BLUETOOTH
®
CONNECTION: IT’S A SETUP
Register your speaker at www.jamaudio.com.
Information about where you bought it and how
you’re using it is like gold for the people who make these speakers. Do them a solid, will ya?
Por manual de instrucciones e información de garantía en español visítenos en
www.jamaudio.com
There are lots of cool Jam speakers.
Check them all out at www.jamaudio.com
PAIRING 1 JAM PLUS SPEAKER
1. Turn speaker over and move speaker mode switch to Mono.
2. Press and hold the power button for 5 seconds.
3. Follow instructions of your device to pair the unit.
4. Pair your device with the speaker by selecting Jam Plus
from your Bluetooth listings on your device or selecting YES.
5. Press play on your device and use the controls on the unit
to adjust desired volume.
PAIRING 2 JAM PLUS SPEAKERS TOGETHER
1. Turn the speaker over and move the speaker mode switch to L.
2. Turn the 2nd speaker over and move the speaker mode switch to R.
3. Press and hold the power button for 5 seconds on the 1st speaker.
4. Press and hold the power button for 5 seconds on the 2nd speaker.
5. Speakers will begin to pair together automatically.
6. Pairing process can take up to 30 seconds. When you hear a tone and the
JAM2 indicator light is solid white, you may pair your device.
7. Follow your device instructions to pair the speakers.
8. Pair your device with the speakers by selecting Jam2 from
your Bluetooth listings on your device or selecting YES.
PACKAGE CONTENTS
Charging Cord
User Manual
Speaker
Language
Selector Pin
LANGUAGE SELECTOR PIN
1. The cord that came with
the speaker—the one with
the USB on one end and
the Micro USB on the
other—is made to work
with your computer.
2. If you want to use the wall outlet, you’ll
need to pick up a power cord with a Micro
USB the next time you’re at the store, or
use any USB AC adapter, including the
one for your cell.
Now go get ready for an epic night while your speaker does too. It needs about 3 hours to be fully
charged for 6 hours of party time.
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got
two options: you can charge it using your computer or a wall outlet.
1. This is the power button, press and hold for 5
seconds to power on
2. Speaker Mode switch
3. The power cord goes here
4. Here’s where you use a mini jack cord to hook
it up old school
5. It speaks too. Toggle between languages here
6. Language Selector Pin
7. Reset
8. Check out how much juice is in the battery
9. Turn the music down (Wait, why do you need
to turn it down?)
10. Push it to play, push it again to pause
11. Turn the music up
12. This light lets you know when Bluetooth
is paired
13. Jam
2
Light
L – M
ON
O – R
7
2
3
4
1
5
RES
ET
13
8
9
11
10
12
6
Like any amazing couple, this one starts with a connection—one between your device and the
speaker’s
Bluetooth
.
Here’s how it works:
1. We know you’re probably going to think, “derp” with this one, but we have to say it: Make sure the
smartphone, tablet or computer you want to hook up to the speaker has
Bluetooth
. (There. We
got that out of the way.)
2. Turn on the speaker (press and hold for 5 seconds) and look for the little blinking light.
3. Do whatever your device needs you to do on its end. (We don’t know what you’re using. We’re
not spies.)
4. Look for JAM PLUS in your device’s
Bluetooth
list or click YES—whatever pops up on your
device—and BAM! you’re connected.
5. Now hit PLAY on your speaker and crank it up—or down if you’re lame.
You’re probably only going to have to do this once, unless your device goes through a major
I-just-dropped-it-in-the-pool kind of reboot. The device and
Bluetooth
will find each other every time
just as long as the speaker is set to
Bluetooth
and your device’s
Bluetooth
is, you know—on.
If you’re connecting to a computer, you may have some extra steps on that end. You’ll have to get
that information from the computer company.
Depending on your device you may be prompted to enter a pairing code.
If prompted enter “0000” as the code.
Press and hold the PLAY/PAUSE button for 5 seconds to activate pairing mode.
Note: If you turn on your Jam Plus but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: You should never have to do this, but in the event the speaker controls are not operable, press the
reset button to reset the speaker.
USER GUIDE AND WARRANTY INFORMATION
www.jamaudio.com
Bluetooth
Devices
JAM 2
on
>
L - M O N O - R
L - M O N O - R
Track 1
Bluetooth
Devices
JAM PLUS
on
>
L - M O N O - R