- DL manuals
- James
- Ultrasonic Jewelry Cleaner
- Ultra 7050
- User Manual
James Ultra 7050 User Manual
Summary of Ultra 7050
Page 1
Ultra 7 0 5 0 cordeless ultrasonic cleaner 14/06/060-v1 user guide.
Page 2: Introduction
Introduction use tap water. Special solutions are not necessary in most cases. Principles of ultrasonic cleaning: millions of tiny air bubbles are generated within liquid by high frequency vibration. The air bubbles burst when in contact with object and dislodge the debris to achieve the cleaning ef...
Page 3: Safety Instructions
2 safety instructions please read this before using your product do not attempt to remove any screws or panels. There are no user serviceable parts inside. Do not operate this unit if the cord or plug is damaged. Please refer to a service centre for examination and repair. To avoid electric shock, n...
Page 4: Included Accessories
Included accessories lid viewing window stainless steel tank handle detachable body plug and cord on button timer display shows the selected cycle time and counts down during operation set button selects the cycle time off button basket watch stand cd/dvd holder 3 features and accessories.
Page 5: 3 Level Clean Plan
Jewellery necklaces, rings, bracelets etc. Porous stones such as pearls etc. Should not be immersed. Use the optional watch stand to hold the stones out of the water. If in doubt please refer to our website: www.Jamesproducts.Co.Uk for further details. Watches and glasses / sunglasses waterproof wri...
Page 6: Better Results
Better results 5 important tips for getting better results • to start, fill the tank with warm tap water (ideally 45° to 50° c). Never boiling, but bearable to put your hand into. You will always get better cleaning results with warm water and it will help the unit to achieve maximum cleaning potent...
Page 7: Operating Instructions
Operating instructions 6 to avoid causing permanent damage: never operate the unit without water in the cleaning tank. Never use boiling water. Open the lid and fill the stainless steel tank with warm water (ideally 45° - 50°c). Do not exceed the “max” marking on the inside of the tank. Place the it...
Page 8: Different Ways of Cleaning
7 emptying the tank • remember to change the water between cycles as it becomes dirty. • always ensure the unit is unplugged when changing the water. • always pour liquid away via the front spout. Different ways of cleaning general cleaning use plain warm tap water (ideally 45° to 50°c) with a few d...
Page 9: Using The Accessories
Using the accessories 8 basket during the ultrasonic cleaning process, items tend to move in tune with the agitated fluid. Such movement may cause small scratches to occur on some delicate items if they are placed directly into the stainless steel tank. If this may be the case, place the such items ...
Page 10: Maintenance and Storage
9 maintenance and storage after use, ensure the unit is unplugged. Pour the water away (via the front spout), and wipe the stainless steel tank and housing with a clean dry cloth. To avoid electric shock, do not wash the exterior of the unit with water. The unit should be stored in a cool dry place,...
Page 11: Guarantee
Guarantee your ultrasonic cleaner has been carefully manufactured and 100% tested using high quality assured components. It is guaranteed against faulty workmanship and materials for a period of 12 months from the date of purchase. In the unlikely event that a failure should occur, the unit will be ...