James ULTRA 8060 User Manual - Applications
APPLICATIONS
6
1. Metal Processing Manufacturers and Jewellery Makers:
- With warm 45°-50° tap water and SeaClean2, ultrasonic cleaning can
remove grease or abrasive powder from work-in-process metal items and
keep them clean.
- Jewellery made with investment casting often has wax layer in addition to
debris. Turning on the heater will raise the water temperature, melt the wax
and improve the cleaning. If in doubt, contact your supplier prior to use.
2. Optical Labs:
During edging and polishing, debris and abrasives can scratch lenses.
Ultrasonic cleaning can effectively protect the lenses. Debris exists in the
crevices of the frames during processing and polishing. Using an ultrasonic
cleaner and tap water can easily remove the debris.
3. Biology, Chemical Laboratories:
Labs can use ultrasonic cleaners to clean test tubes and other glass or metal
containers to remove residual chemicals and debris that can affect the
accuracy of the test results.
4. Medical Instrument Disinfection Rooms:
Non-disposable medical instruments may have blood or organic tissues
left after use. They need to be removed with ultrasonic cleaners before
disinfection.
5. Dental Clinics:
Dental clinics can use ultrasonic cleaners to clean dental instruments and to
remove blood and small particles left on the instruments before disinfection.
6. Electrical Component Manufacturers:
Terminals on AC contactors and relays need to be kept clean to prevent
sparking and non-contact. Ultrasonic cleaning is the most effective method to
keep these parts clean.