JamHub Tracker MT16 User Manual - Audio Formats - Wav, Or Mp3
14
Tracker MT16™ — User Guide
© 2015 JamHub Corp. All rights reserved. Product features, specifications, system requirements,
and availability are subject to change without notice. Patents Pending.
Audio Formats - WAV, or MP3
Your Tracker MT16 supports WAV or MP3 file formats.
Menu Top
» Setting → Audio → Audio Format
» Choose WAV or MP3 using or buttons
» Save by pressing on the desired option, an ‘
*
’ indicates the current setting
Record - ON/OFF
The Tracker MT16 uses high quality analog to digital (A/D) converters, ensuring that
you get accurate recordings every time you play. Setting the Record option to
ON will
turn on the A/D converters and prepare them for recording. With your Tracker MT16
armed for recording, you will see the
ARMED LED light turn on and the LCD will display
a time counter, audio format and sampling rate.
Menu Top
» Record ON/OFF
» Choose Record ON or OFF using or buttons
» Save by pressing on the desired option, an ‘
*
’ indicates
the current setting
While your Tracker MT16 is armed for recording, the
CLIP light will be active, flashing
red when incoming signal is too hot and needs to be turned down. Check your sound
and levels with your recorder armed.
Naming Your Files
To change the name of a take before you have recorded it:
1.
Arm your Tracker MT16
2. Hold for 3 seconds, a cursor will appear
3. Use and to move the cursor
4. Use and to change the character
5.
Save the file name by holding for 3 seconds