1. DL manuals
  2. Jammin Pro
  3. Music Mixer
  4. studiomix 10
  5. User Manual

Jammin Pro studiomix 10 User Manual

Manual is about: 10 channel mixer with usb audio interface/fx

Summary of studiomix 10

  • Page 1

    User's manual.

  • Page 2

    The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or death. The symbol is used in the service documentation to indicate that specific compo...

  • Page 3

    · power supply the apparatus should be connected to the power supply only of the type as marked on the apparatus or described in the manual. Failure to do could result in damage to the product and possibly the user. Unplug this apparatus during lightning storms or when unused for long periods of tim...

  • Page 4

    Table of contents 1.Introduction...................................................2 1.1 general mixing console functions.................................................................2 1.2 the user’ s manual..............................................................................3 1.3 before...

  • Page 5

    1.Introduction congratulations! In purchasing the studiomix 10 / studiomix 12 series micing concole you have acquired a mixing console whose small size belies its versatility and audio performance. The microphone channels feature high-end me mic preamps preamps in terms of sound quality and dynamics...

  • Page 6

    1.2 the user’ s manual the user’ s manual is designed to give you both an overview of the controls, as well as detailed information on how to use them. 1.3.1 shipment 1.3 before you get started your mixing console was carefully packed in the factory to guarantee safe transport. Nevertheless, we reco...

  • Page 7

    Please note that all unit must be properly grounded. For your own safety, you should never remove any ground connectors from electrical devices or power cables, or render them inoperative. Please sure that only qualified people install and operate the mixing console. During installation and operatio...

  • Page 8

    The circuitry of the british eqs is based on the technology used in the bast-known top-of-the-line consoles and providing a warm sound without any unwanted side effects. The result are extremely musical equalizes which, unlike simple equalizers, cause no side effects such as phase shifting or bandwi...

  • Page 9

    The pan control determines the position of channel signal within the stereo image. This control features a constant-power characteristic, which means the signal is always maintained at a constant level, irrespective of position in the stereo panorama. Pan the level control determines the level of th...

  • Page 10

    The fx send connector outputs the signal you picked up from the individual using the fx controls. You can connect this to the input of an external effects device order to process the fx bus master signal. Once an effects mix is created, the processed signal can then be routed from the effects device...

  • Page 11

    8 if the connected effects processor receives no input signal. The fx send control is probably too low. This also goes for the built-in effects processor. Adjust your external effects processor to 100% wet (effects signal only), before the effects signal is added to the main mix along with “dry” cha...

  • Page 12

    9 power please do not connect microphones to the mixer (or the stagebox/wallbox) as long as the phantom power supply in switched on. Connect the micro-phones before you switch on the power supply. In addition, the monitor/pa loudspeakers should be muted before you activate the phantom power supply. ...