Mpa-201 warning: improper installation could result in damage to the amplifi er and/or speakers. Read all instructions before installation..
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.Install in accordance with the manufacturer's instructions. 8. Do not install near...
Contents: introduction page 4 features: page 4 jamo mpa-201 front panel page 5 jamo mpa-201 rear panel page 6 connection page 8 connecting examples page 9 assive subwoofer page 9 p fullrange stereo page 10 2 x 200w bridged page 11 daisy chain page 12 specifi cations page 13 warranty page 14.
4 introduction congratulations on your purchase of your new jamo multi-p urpose amplifi er (mpa-201). It is backed by state-of-the-art engineering and manufacturing techniques to bring you the best quality craftsmanship and reliable performance. The mp a-201 is specifi cally designed for home theatr...
5 jamo mpa-201 front panel power led flashing blue - standby mode blue - amplifi er on flashing red - thermal protection red - overload protection level adjustment 1 2.
6 jamo mpa-201 rear panel 120 volt version t5al/250v power switch socket for mains cable speaker output: speakers terminals low pass adjustment : output frequenc y is adjustable between 50 - 150 hz. Only adjustable when low pass is selec ted low pass: flat: fullrange stereo/mono: stereo mode - 2 x 1...
7 jamo mpa-201 rear panel 220-240 volt version t2.5al/250v power switch socket for mains cable speaker output: speakers terminals low pass adjustment : output frequenc y is adjustable between 50 - 150 hz. Only adjustable when low pass is selec ted low pass: flat: fullrange stereo/mono: stereo mode -...
8 connection the jamo mpa-201 is equipped with gold-plated push button binding posts which will accept very heavy stripped wire. Ask your local jamo dealer for advice on the choice of cable. Connect the loudspeakers to your jamo mpa-201 as follows: 1. Turn of the mpa-201 2. Carefully remove approx. ...
9 connecting examples passive subwoofer when low pass is selec ted, you can adjust the low pass frequency between 50 - 150 hz. This makes it possible to make the subwoofer match your front speakers..
10 fullrange stereo.
11 2 x 200w bridged connecting examples.
12 daisy chain when using this feature you can connect all the mpa-201 in parallel you need..
13 rated power output total harmonic distortion (thd) signal-to-noise r clearance for ventilation atio crossover freq. Responce (-3db): auto turn on sensitivity delay „off“ time line out freq. Response (-3db) input impedance line in max. Noise+hum vol max weight shipping weight dimensions (including...
...
Mpa-201 / 02.2006.
