Janam XP20 Quick Start Manual - page 7
XP Series Quick Start Guide
Getting Started
A. CALIBRATING THE SCREEN
The fi rst time the device is turned on, the Welcome Utility appears. To set up the device, follow the on-screen
instructions using the stylus to tap the exact center of each target
Note - If your XP Series device came pre-loaded with a custom software application, the Welcome Utility may not appear.
B. BRIGHTNESS/CONTRAST/BACKLIGHT ADJUSTMENT
Control
PDA Keypad
Numeric Keypad
Brightness
(XP30 Series)
Press the brightness/contrast control on the
keypad. Use stylus to adjust brightness by
sliding the on-screen control left/right.
Press and hold the yellow function key and
press one of the four navigation keys. Use
stylus to adjust brightness by sliding the on-
screen control left/right.
Contrast
(XP20 Series)
Press the brightness/contrast control on the
keypad. Use stylus to adjust brightness by
sliding the on-screen control left/right.
Press and hold the yellow function key.
Use the up/down navigation keys to adjust
contrast.
Backlight On/Off
Press and hold the power button to toggle
backlight on/off.
Press and hold the power button to toggle
backlight on/off.