Janam XP20 Quick Start Manual - page 7
Getting Started
A. CALIBRATING THE SCREEN
The fi rst time the device is turned on, the Welcome Utility appears. To set up the device, follow the
on-screen instructions using the stylus to tap the exact center of each target
Note: If your XP Series device came pre-loaded with a custom software application, the Welcome Utility
may not appear.
B. BRIGHTNESS/CONTRAST/BACKLIGHT ADJUSTMENT
Control
PDA Keypad
Numeric Keypad
Brightness
(XP30 Series)
Press the brightness/contrast control
on the keypad. Use stylus to adjust
brightness by sliding the on-screen
control left/right.
Press and hold the yellow function key
and press left/right navigation keys.
Use stylus to adjust brightness by
sliding the on-screen control left/right.
Contrast
(XP20 Series)
Press the brightness/contrast control
on the keypad. Use stylus to adjust
contrast by sliding the on-screen
control left/right.
Press and hold the yellow function key
and press left/right navigation keys.
Use stylus to adjust contrast by sliding
the on-screen control left/right.
Backlight On/Off
Press and hold the power button to
toggle backlight on/off.
Press and hold the power button to
toggle backlight on/off.
XP Series Quick Start Guide
Page 6