Janam XT1 Quick Start Manual - page 5
A. CHARGING THE BATTERY
To charge the battery using the included USB AC Adapter:
1. Insert the mini-USB end of the USB cable into the mini-USB port on the XT1 unit.
2. Plug in the AC Adapter. Use only easily accessible wall sockets that are easily reached with the length of
supplied power cable.
To charge the battery using your PC USB Port:
1. Connect the USB cable to the PC. Use only a USB-IF compliant USB port as a charging source.
2. Insert the mini-USB end of the USB cable into the mini-USB port on the XT1 unit.
To charge the battery using an XT1 Cradle Kit:
1. Connect the power supply to the cradle, then connect the line cord to the power supply.
2. Plug in the power supply. Use only easily accessible wall sockets that are easily reached with the length of
supplied power cable.
3.Placethedeviceincradle.TheLEDonthedevicewillilluminatetoconfirmconnection.
4. The battery is fully charged in approximately 2 hours.
B. TURNING DEVICE ON/OFF
1. To turn on your device, press and hold the Power key.
2.Ifyouareturningonyourdeviceforthefirsttime,followtheon-screeninstructionstosetupyourXT1
Rugged Mini-Tablet.
3. To power off the device, press and hold the Power key, and then select Power Off.
Getting Started
Page 4