Summary of HUB 24
Page 2
Ii contents operating manual hub24 series dimmer emc compliance this product is approved for use in europe and australia / new zealand and conforms to the following standards: european norms australian / new zealand standards en 50081-1 as/nzs 4252.1 en 50082-1 as/nzs 4251.1 en 60065 as/nzs 3260 to ...
Page 3: Table Of Contents
Contents iii revision 1.0 - 7-may-02 hub24 series dimmer operating manual table of contents 1 introduction .......................................................................1 2 equipment description .....................................................3 3 getting started ..........................
Page 4
Iv contents operating manual hub24 series dimmer 4.2.23 clear error log (5-5)........................................................................... 15 4.2.24 control source (5-6)............................................................................ 15 4.2.25 record a snapshot (6-1) .........
Page 5
Contents v revision 1.0 - 7-may-02 hub24 series dimmer operating manual appendix a using the dimmer utility..................................31 a.1 installation ......................................................................................................31 a.2 main window .....................
Page 6
Vi contents operating manual hub24 series dimmer supplied items 1. Hub24 dimmer. 2. User manual. 3. Warranty registration card. Optional accessories • reinforced protective cover (part no. Jnd-dc-hub24). • hub download kit (part no. Jnd-hub24download) - pc download cable - jands dimmer utility softw...
Page 7: Introduction
Introduction 1 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 1 introduction the jands hub24 is a unique combination of dimmer channels, power distribution and isolated dmx splitting, all in one compact and low noise package. The hub24 is specifically designed for demanding touring and...
Page 8
2 equipment description operating manual hub24 series dimmer figure 2.1.
Page 9: Equipment Description
Equipment description 3 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 2 equipment description front panel layout figure 2.1 1. Phase power leds: three different coloured leds (one for each phase) indicate that the mains supply phases are available. Red for phase a, white for phase b a...
Page 10: Getting Started
4 getting started operating manual hub24 series dimmer 3 getting started 3.1 positioning the unit correct positioning and adequate ventilation are essential for reliable operation. Ensure the transportation bag or road case is totally removed before use. The hub24 must be upright when in use, with c...
Page 11: 3.4
Getting started 5 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 3.4 connecting loads power down the hub24. Plug in the loads to the dimmer output sockets. It is recommended that, where practical, the load on the dimmer outputs be evenly spread across the 15 channels. This will minimis...
Page 12
6 dimmer operation operating manual hub24 series dimmer menu structure overview menu 1 dmx settings 1-1 start channel 1-2 cross patch (for each output) 1-3 dmx terminate 1-4 loss of signal 2 dimmer output 2-1 control curve (for each output) 2-2 current limit 3 test 3-1 drive output (for individual, ...
Page 13: Dimmer Operation
Dimmer operation 7 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 4 dimmer operation this section assumes the dimmer has been correctly connected to three phase power and a source of dmx input signal, as described in section 3. In this manual, references to individual front panel butto...
Page 14
8 dimmer operation operating manual hub24 series dimmer a typical menu screen select 4 3 2 1 ch 1 - next a l l phase a phase b information displayed on a menu: 1. Numbering showing the current location within the menu tree. 2. Tabs showing the number of items in this sub-menu with current position h...
Page 15
Dimmer operation 9 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 4.2.2 dmx cross patch (1-2) menu 1 dmx settings 1-2 cross patch each of the hub24’s dimmer outputs can be set to individually respond to any dmx channel, from 1 to 512. This allows the outputs to be patched out of sequen...
Page 16
10 dimmer operation operating manual hub24 series dimmer the user definable curves can be used for lamps whose light output is not linear, for lamps with special requirements (eg. Fluorescent tubes) or if any special curve is required. The user definable curves are created and edited on a pc (or lap...
Page 17
Dimmer operation 11 revision 1.0 - 7-may-02 hub24 series dimmer operating manual single phase or all outputs • select “3-1 drive output” on the menu. • turn the encoder wheel to highlight either “all”, “phase a”, “phase b” or “phase c” and press select. • all the selected outputs will be set to zero...
Page 18
12 dimmer operation operating manual hub24 series dimmer 4.2.12 display contrast (4-1-3) menu 4 system settings 4-1 display 4-1-3 contrast the contrast of the lcd display can be changed to suit the required viewing angle. • select “4-1-3 contrast” on the menu. • turn the encoder wheel to change the ...
Page 19
Dimmer operation 13 revision 1.0 - 7-may-02 hub24 series dimmer operating manual − lcd contrast and backlight to defaults. − main screen to normal. − playback mode to override. − chase parameters to defaults (chase steps are not affected). Other settings such as dmx cross patch and the time are not ...
Page 20
14 dimmer operation operating manual hub24 series dimmer 4.2.18 software version (5-1) menu 5 diagnostics 5-1 software version select “5-1 software version” on the menu to display the version and date of the operating software currently in the hub24. This changes when a new version of the operating ...
Page 21
Dimmer operation 15 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 4.2.22 error log (5-4) menu 5 diagnostics 5-4 error log when an event occurs that generates an error or warning, a message is immediately displayed on the lcd and an entry is placed in the error log. Neutral earth warni...
Page 22
16 dimmer operation operating manual hub24 series dimmer 4.2.25 record a snapshot (6-1) menu 6 record 6-1 snapshot the hub24 can record up to 8 snapshots, which can be played back later. A snapshot is a grab of the drive level of all 15 dimmer outputs. • set the dimmer outputs to the desired levels,...
Page 23
Dimmer operation 17 revision 1.0 - 7-may-02 hub24 series dimmer operating manual • select “6-2 chase” on the menu. • turn the encoder wheel to highlight the desired chase and press select. • turn the encoder wheel to highlight “parameters” and press select. • turn the encoder wheel to highlight eith...
Page 24: 4.3
18 dimmer operation operating manual hub24 series dimmer 4.2.30 playback a chase (7-2) menu 7 playback 7-2 chase when playing back a chase, it can be assigned control of all dimmer outputs or a selection of dimmer outputs. Channels in the chase that have not been assigned an output will be ignored. ...
Page 25: 4.4
Dimmer operation 19 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 4.4 download from pc new operating software, new dimming curves and custom logos can all be downloaded to the hub24 from a pc. This is done without opening the unit, via the front panel dmx input connector. The followin...
Page 26: Fault Diagnosis
20 fault diagnostics operating manual hub24 series dimmer 5 fault diagnosis note contact your authorised jands distributor for repairs or servicing. In australia refer all repairs to an authorised jands service agent or return the faulty unit in suitable packaging to: jands electronics pty ltd servi...
Page 27: 5.2
Fault diagnostics 21 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 5.1.3 thermal protection the hub24 dimmers primarily use convection cooling, so reducing the air flow to the unit can produce over-heating. The temperature of each of the heatsinks are individually monitored. If the te...
Page 28: 5.4
22 fault diagnostics operating manual hub24 series dimmer 5.4 dmx faults loss of dmx signal will be indicated by “ – no dmx – ” displayed at the bottom of the main screen. When dmx signal is lost, the dimmer will respond as configured until a new dmx signal is provided, or a snapshot or chase functi...
Page 29: 5.8
Fault diagnostics 23 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 5.8 fault finding guide fault symptom possible cause remedy playback or build are active see sections 4.2.9 and 4.2.31 one or more channels don’t respond to dmx control. Dmx start channel is set incorrectly change dmx ...
Page 30
24 fault diagnostics operating manual hub24 series dimmer fault symptom possible cause remedy one or more channels won’t drive to full current limit reached reduce the load on that phase adjust current limit setting to a higher value (see 4.2.6) recalibrate current (see 4.2.21) fan activation warnin...
Page 31: Installation
Installation 25 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 6 installation 6.1 free standing the hub24 is primarily convection cooled, with the main air intake at the bottom and air exhaust at the back and sides - these openings must not be obstructed. Correct positioning and adequa...
Page 32: Maintenance
26 maintenance operating manual hub24 series dimmer 7 maintenance warning do not allow the entry of liquids of any sort into the dimmer chassis. External cleaning: if the front panel requires cleaning, wipe with a mild detergent on a damp soft cloth. Do not spray liquids into the chassis. Do not use...
Page 33
Technical data and specifications 27 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 8 technical data and specifications parameter hub24 no. Of outputs - dimmer: distribution: opto dmx out: 15 9 2 input power requirements: 3 phases plus neutral and earth 200-265 volts phase-to-neutral 3...
Page 34: 8.1
28 technical data and specifications operating manual hub24 series dimmer parameter hub24 mains measurements – voltage accuracy: current accuracy: 5% 15% power supply entry: 3 metre tail with clipsal 56p532 plug output connectors – dimmer: 15 x 10 amp clipsal 10mp distribution: 6 x 10 amp clipsal 10...
Page 35
Technical data and specifications 29 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 8.2.1 mains power - block diagram 1 output sockets 1 circuit breakers 2 3 4 5 6 7 8 9 10 11 12 13 14 15 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a b c dimmer circuits a b c distribution rcd dimmer rcd control ...
Page 36
30 technical data and specifications operating manual hub24 series dimmer 8.2.3 normal three phase plus neutral operation the hub24 is normally supplied with a three phase power cable and plug attached, suiting the vast majority of available mains supplies (ie. Three phase and neutral). The incoming...
Page 37: A.1
Using the dimmer utility 31 revision 1.0 - 7-may-02 hub24 series dimmer operating manual appendix a using the dimmer utility the hub24 and later hp dimmers can have updated operating software downloaded to them. The hub24 can also have user definable dimming curves and custom logos downloaded to it....
Page 38: A.2
32 using the dimmer utility operating manual hub24 series dimmer installing from a downloaded file 1. Download dim_utilities.Zip from the jands web site. 2. Extract the installation files using an archive utility (eg. Winzip). 3. Run the newly extracted setup.Exe program. 4. The installation program...
Page 39: A.4
Using the dimmer utility 33 revision 1.0 - 7-may-02 hub24 series dimmer operating manual 3. If a curve file has been selected, the window will change to allow entering curve number and name. Click either curve #1 or curve #2 and type in a curve name if it needs to be changed. 4. If a logo file has b...
Page 40
34 using the dimmer utility operating manual hub24 series dimmer graphically editing a curve the curve editor provides four graphical editing methods and for very fine changes there is a fine adjustment section. These graphical editing methods are: • line • curve • freehand • bar while editing, the ...
Page 41
Using the dimmer utility 35 revision 1.0 - 7-may-02 hub24 series dimmer operating manual blank blank sets the power output to zero for every control input value, this is used to start drawing a new dimming curve. On the edit menu click blank (or click the blank icon) to zero the curve in the editor....
Page 42: A.5
36 using the dimmer utility operating manual hub24 series dimmer a.5 logo generator utility the logo generator is used to draw customs logos from scratch, to modify existing images and to download logos to the dimmers. This is achieved using the following main functions: • opening an existing logo f...
Page 43
Using the dimmer utility 37 revision 1.0 - 7-may-02 hub24 series dimmer operating manual graphically editing a logo the logo generator provides four graphical editing methods and erase functions. The graphical editing methods are: • dot • line • marquee • text while editing, the position of the mous...
Page 44
38 using the dimmer utility operating manual hub24 series dimmer redo on the edit menu click redo (or click the redo icon) to reverse the action of the last undo. Each click reverses one more undo. Blank blanks the entire logo (sets all pixels to white), this is used to start drawing a new logo. On ...
Page 45
Using the dimmer utility 39 revision 1.0 - 7-may-02 hub24 series dimmer operating manual erasing the logo from a dimmer the logo and password that are currently in the dimmer can be erased. 1. On the file menu click erase logo (or click the lightning icon) to open the erase logo window. 2. If the lo...
Page 46
40 circuit – pc download cable operating manual hub24 series dimmer appendix b pc download cable the following cable can be used for downloading files from a pc to both hp dimmers and hub24 dimmers. It consists of very commonly available parts. Parts list 1x female d9 connector 1x d9 backshell 2x 1k...