Summary of JLX-LITE-MkII
Page 1
Modular lighting bar system jlx-lite-mkii user guide.
Page 2: Compliance
Compliance this product is approved for use in australia/new zealand and conforms to the following standards. Standards as/nz 3100-2002 - approval and test specification - general requirements for electrical equipment disclaimer information contained in this user guide is subject to change without n...
Page 3
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 1 table of contents 1 introduction .......................................................................... 2 1.1 mounting options ................................................................................. 2 1.2 layout..................................
Page 4: 1 Introduction
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 2 1 introduction the jands jlx-lite-mkii is a universal modular wired bar system intended for fixed installations where a lighting bar with associated fixed wiring is required. 1.1 mounting options the jlx-lite-mkii includes many mounting holes on its top su...
Page 5: 2 Installation
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 3 2 installation 2.1 initial inspection the jands jlx-lite-mkii lighting bar should be inspected prior to installation. Any dents, cracks or damage that appears to have been suffered in transit should be photographed and the freight company notified before p...
Page 6
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 4 a perch bar option. If this cannot be achieved in the crosswise direction, consider a different layout or using packing pieces to ensure the specification can be met. During assembly: if necessary drill holes into the base of the jlx-lite-mkii as required....
Page 7
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 5 3. Depending on the required configuration it may be possible to install some of the wiring before the bar has been hung. If this is the case, install any wiring that can be installed now. 4. Orient the bar as it is intended to be hung, checking the mains ...
Page 8
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 6 the socket as a locating guide. Unused mains socket holes must be protected with a metal cover. 16. Remove the clear protective coating from the covers. 17. Fit the covers. The covers must be secured using the screws provided. 18. Fit the supplied end plug...
Page 9
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 7 5. Depending on the required configuration it may be possible to install some of the wiring before the bar has been hung. If this is the case, install any wiring that can be installed now. 6. Fit the jlx-lite-mkii to the perch bar mount so that the bar sli...
Page 10
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 8 2.6 installation record this installation record should be filled out and signed by the person installing the lighting bar(s). Where more than one person has installed the lighting bar(s), the foreman, supervisor or similar person responsible for the works...
Page 11: Warning
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 9 3 inspection & maintenance the following page contains records for annual inspection/maintenance. Inspection/maintenance should be carried out annually on both the mechanical structure and the electrical wiring etc by appropriately qualified persons. Fill ...
Page 12
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 10 3.1 annual equipment inspection/maintenance log product jlx-lite-mkii serial number (s) pass fail action inspect the chassis for evidence of impact damage or physical abuse inspect electrical outlets for evidence of wear and damage inspect mains cable and...
Page 13
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 11 4 technical data and specifications parameter 16m4 24m6 number of socket outlets 4 6 voltage 230v current 10a per outlet frequency 50hz elv connector hole suits amphenol & neutrik “d“ series maximum point load 50kg maximum distributed load (in- cluding an...
Page 14: Warning
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 12 4.1 rated capacity the load limitations of the jlx-lite-mkii is outlined in the following sections. Note that the limits indi- cated apply to jlx-lite-mkii that has been installed as per the instructions in this guide. Warning never exceed the specified l...
Page 15
Usg-00000-jlxlitemkii [1.0] jlx lite mkii 13 4.2 mounting hole detail.