Janome Artistic Suite V6 Manual
of
5
Bling it ON!
Maddie Bushman Educational Coordinator
1. Open Artistic Suite V6 and connect the cutter to
the computer using the USB cable provided with
the cutter.
2. Set the blade at 6-8 depending on test results.
Note –refer to the manual and always test first.
3. When this screen appears, select “next”.
4. When the screen appears for selecting the fabric,
choose “cotton” and then select “next”. Note – no
fabric will be used this is just the background for
the crystal design.
5. When the screen appears asking where the
artwork will be found, select “new graphic” and
then select “finish”.
6. Select “tools” from the top toolbar, select “clipart
library” and then select “Insert clipart”.