Janus Terminus 400AP LCR User Manual - page 12
Terminus 400AP LCR User Guide JA07-UM_LCR
Page 12 Rev: A01 Date: 10/23/14
© Copyright 2014 Janus Remote Communications
Specifications subject to change without notice
All Rights Reserved See website for latest revision. Not intended for life support applications.
Getting started with the 400AP Router continued
Configuring the router continued
Step 8
Go to the Administration tab, and scroll down to find the available settings.
If you are not adjusting the default host port number you may move on. Otherwise you can change it, click “Save”
and continue.
Step 9
Now we reboot the device so all settings take effect. You can do this by clicking the “Reboot Now” button located
in the upper right hand corner, it appears on all tabs when prompted to do so.
Note: After pressing the “Reboot Now” button, you will be prompted that the router is rebooting with a wait
screen. Do not power off the device until this process completes.
Step 10
Once rebooted, if the APN and other network settings are correct the green LED will illuminate upon a successful
PPP connection being made.
Once this LED illuminates, open your browser and attempt a simple connection to www.google.com to test.