Japan Cach Machine TAIKO Series Service Manual - 1-2. Prior to Use
1-3
TAIKO Service Manual
© 2006 Japan Cash Machine Co.Ltd. All rights reserved.
CHAPTER
1
1-2. Prior to Use
Be sure to follow these steps when creating the project for TAIKO unit.
1. Preperation
Before using TAIKO unit, check the all required hardware is present and read all
specification, wiring, and installation infromation.
See => CHAPTER 2 Specifications or CHAPTER 3 Installation/Operation
2. Panel Cut Out
Creat the panel cut out on the door to install the TAIKO unit.
See => 2-6. Panel Cut Dimensions
3. Setting
Set the DIP switch depending on the connected host machine or the features of TAIKO
unit you want to use.
See => 2-7. DIP Switch Setting
4. Installation
Install the TAIKO unit and connect the harness with the host mashine.
See=> CHAPTER 2 Specifications, or CHAPTER 3 Installation/Operation
5. Operation
Supply the power to the TAIKO unit.