1. DL manuals
  2. Jaric Design
  3. Radar Detector
  4. StealthOne
  5. Owner's Manual

Jaric Design StealthOne Owner's Manual

Summary of StealthOne

  • Page 1

    Stealthone owner’s manual stealthone version 1.0 copyright © jaric design llc. 2004 all rights reserved..

  • Page 2

    Copyright copyright © jaric design llc. 2004 all rights reserved. Trademarks stealthone tm is a trademark of jaric design, llc. Bmw is a registered trademark of bayerische motoren werke ag. Valentine one ® , all-bogeys ® , logic ® , and advanced–logic ® modes are registered trademarks of valentine r...

  • Page 3

    Contents 1 1 getting started with stealthone 1 welcome to stealthone 2 installing stealthone 4 stealthone initial startup 7 2 2 using the stealthone 8 3 3 config 4 4 pro service 31 how does it work? 8 using stealthone 11 using wheel buttons to control the valentine one ® 13 uring stealthone 14 confi...

  • Page 4

    Stealthone owner’s manual 1 getting started with stealthone in thi stealthone initial startup 7 1 1 s chapter: welcome to stealthone 2 installing stealthone 4.

  • Page 5: Welcome to Stealthone

    Welcome to stealthone since you are the proud owner of a valentine one ® radar locator you are already aware that the valentine one ® is the most advanced radar locator available. Your bmw is also one of the most advanced automobiles available. Stealthone combines the best of these two worlds. As go...

  • Page 6

    Stealthone owner’s manual 3 requirements: - bmw 5 series (e39), x5 (e53), 3 series (e46), or z4 (e85). - for the e39 or e53 you must have one or more of the following: instrument cluster (ike) with the 20 character lcd display, multi- information display (mid), or navigation (nav). - for the e46 or ...

  • Page 7: Installing Stealthone

    Installing stealthone the stealthone product includes the following items: • the stealthone module • a standard 2 ft. Rj-11 modular power cable. This cable connects between the valentine one ® accessory port and stealthone. • a second 2 ft. Rj-11 modular interface cable with an additional black wire...

  • Page 8

    Basic stealthone installation: to install stealthone: 1. Select an appropriate location to install your valentine one ® using any of the methods described in the valentine one ® owner’s manual. We recommend that you use the direct wire power adapter provided with your valentine one ® and tap into a ...

  • Page 9

    Stealthone owner’s manual 6 4. If you have a 5 series or x5, locate an i-bus wire in your automobile. If you have a 3 series or z4, locate a k-bus wire in your automobile. Position the red wiring-harness connector around the i-bus or k-bus wire and squeeze it gently with pliers until it snaps shut. ...

  • Page 10: Stealthone Initial Startup

    Stealthone initial startup after you have installed both the valentine one ® and stealthone, you must configure the stealthone for your car model. When you first apply power to stealthone it will enter setup mode and ask you to select your car model. Follow the directions below to activate your stea...

  • Page 11

    Stealthone owner’s manual 8 using the stealthone in thi using wheel buttons to control the valentine one ® 13 2 2 s chapter: how does it work? 8 using stealthone 11.

  • Page 12: How Does It Work?

    How does it work? Stealthone is an interface module that works in combination with the valentine one ® radar locator to display radar information on a bmw instrument cluster lcd display (ike), multi-information display (mid), radio display (rad), or the navigation screen (nav). How it works: the ste...

  • Page 13

    3 series (e46) business radio display z4 (e85) business radio display 5 series (e39), x5 (e53) and 3series (e46) navigation display stealthone owner’s manual 10

  • Page 14: Using Stealthone

    Using stealthone when there is no active alert stealthone will not display any information on any of the bmw displays. When you receive an alert, stealthone interprets this data and displays it on the bmw display you have selected. Once the alert has passed, stealthone will briefly display the curre...

  • Page 15

    5 series or x5 instrument cluster display stealthone owner’s manual 12.

  • Page 16: One

    Using wheel buttons to control the valentine one ® a feature of stealthone is that you can use your bmw’s steering wheel buttons to control the muting and to change modes of the valentine one ® . This can be very convenient if your valentine one ® is located in a hard to reach area. How do i mute th...

  • Page 17

    Stealthone owner’s manual 14 configuring stealthone in thi configuring mute and mode wheel buttons 27 3 3 s chapter: configuring stealthone options 15 stealthone display areas 17 instrument cluster display (ike) e39 and e53 18 radio display (rad) e46 and e85 20 multi-information display (mid) e39 an...

  • Page 18

    Configuring stealthone options the setup menu allows you to easily customize stealthone’s settings by using the steering wheel buttons of your bmw to modify stealthone options. Follow the directions below to display the stealthone setup menu. Important: do not use stealthone setup while driving! To ...

  • Page 19

    Stealthone owner’s manual 16 stealthone setup menu: # option e39/e53 settings e46/e85 settings description 1 bmw: e39 or e53 e46 or e85 bmw model selection. You should not have to change this option after the initial setup. 2 ike mode: 0,1,2 0 instrument cluster (ike) display mode. This option is on...

  • Page 20: Stealthone Display Areas

    Stealthone display areas when deciding in which location you would like to display radar information (on a bmw instrument cluster lcd display, mid radio panel display, or a gps navigation screen), you should keep the following guidelines and display limitations in mind. The more characters available...

  • Page 21

    Instrument cluster display (ike) e39 and e53 for the bmw 5-series (e39) or x5 (e53) you can configure stealthone to display on your car’s instrument cluster (ike). Stealthone only works with instrument clusters that have the 20 segment lcd display. The instrument cluster can display information in a...

  • Page 22

    2. If desired, press the forward button to change the ike display mode to mode 2. Tip: to turn off displaying radar information on the instrument cluster change the mode to 0. 3. If desired you may change the radar direction symbols from letters to arrows. To change the direction symbols first press...

  • Page 23

    Radio display (rad) e46 and e85 if you have a bmw 3-series (e46) or z4 (e85) without navigation you can configure stealthone to display on your car’s radio. The radio can display information in any of the following modes. Radio (rad) display modes: mode description 1 mode 1 displays the radar direct...

  • Page 24

    2. If desired, press the forward button once to change the rad display mode to mode 2. Tip: to turn off displaying radar information on the radio change the mode to 0. 3. If desired you may change the radar direction symbols from letters to arrows. To change the direction symbols first press the rev...

  • Page 25

    Multi-information display (mid) e39 and e53 if you have a bmw 5-series (e39) or x5 (e53) you can configure stealthone to display on your car’s multi-information display (mid). The mid can display radar information in any of the following modes. Mid display modes: mode description 1 mode 1 displays t...

  • Page 26

    2. If desired, press the forward button to change the mid display mode. Tip: to turn off displaying radar information on the mid change the mode to 0 3. If desired you may change the radar direction symbols from letters to arrows. To change the direction symbols first press the reverse button to dis...

  • Page 27

    Navigation display (nav) e46, e39 and e53 if your bmw has the navigation option you can configure stealthone to display on your car’s navigation display. When the navigation display is configured for split screen mode stealthone will display the radar bands above the radar direction, bogey count and...

  • Page 28

    When the navigation display is configured for full screen mode stealthone will display the radar bands to the right of the radar direction, bogey count and radar strength. Nav full screen mode the nav can display information in any of the following modes. Both modes 1 and 2 display data on the nav s...

  • Page 29

    To configure stealthone for a nav display: 1. From the stealthone setup menu, press the reverse button until the navigation display mode setting is shown: tip: to turn off displaying radar information on the navigation display change the mode to 0. 2. To exit from stealthone setup scroll down using ...

  • Page 30

    Configuring mute and mode wheel buttons the steering wheel can be used to control the muting and to change the mode of the valentine one ® . Follow the directions below to enable or disable using the wheel buttons. To enable the -/+ volume wheel buttons to mute the valentine one ® : 1. From the stea...

  • Page 31

    Stealthone owner’s manual 28 product information in thi service 31 4 4 s chapter: troubleshooting 29 limited warranty 30

  • Page 32: Troubleshooting

    Troubleshooting if you encounter any problems using stealthone, refer to the information below. If the suggested solution does not work, or you are experiencing a problem other than those listed, contact jaric design customer service at service@stealth- one.Com or refer to the stealthone user forum ...

  • Page 33: Limited Warranty

    Limited warranty jaric design’s warranty obligations for stealthone are limited to the terms set forth below: the stealthone product is warranted by jaric design, llc. To be free from defects in materials and workmanship for a period of one (1) year from the date of original purchase (“warranty peri...

  • Page 34: Service

    Service if your stealthone needs repair: if you have problems with your stealthone and would like to inquire about a refund, the repair or replacement of the product, send a service request via email to service@jaricdesign.Com. You must obtain a return authorization number (rma) from us before sendi...