JARLTECH 1210 Series Operation manual - page 17
Manual is about: Magnetic stripe reader
of
31
17
Installing Model 1210/1220R
Step 6: Set message suffix
LF
SW7
ENABLE *
ON
DISABLE
OFF
CR
SW6
ENABLE *
ON
DISABLE
OFF
Switch 6 activates CR (carriage return)
at the end of each track of information
from the magnetic stripe. Likewise,
switch 7 activates LF (line feed) at the
end of each track. Set the dip-
switches according to your require-
ments.
It is also possible to activate CR or LF
at the end of each card swipe rather
than at the end of each track. Contact
your distributor for more information.
The start and end sentinels may be
activated with switch 8.
SENTINEL
SW8
ENABLE
ON
DISABLE *
OFF
Step 7: Set start and end sentinels