Iso 9002 certified 1260a magnetic stripe reader lead with technology win customers with service operation manual.
2 ©jarltech international inc. 2005. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of jarltech. Every effort has been made to ensure that the information in this manual is accurate. Jarltech is not responsible for print...
3 1. Introduction 2. Installation 3. Custom programming tool appendix i: specifications.
Introduction 1260a is an advanced bi-directional, programmable magnetic stripe reader. Supports iso standard format card . It is designed for use with credit authorization terminals, point-of-sale terminals, portable terminals, personal computers and banking terminals. Model 1260ak is designed to be...
Installation jc-1260a kb series: the md-6m side of kb cable, shall be connected to pc ps/2 keyboard port, and then, connect rj45 side to jc-1260a. The md-6f side of kb cable can be connected to normal pc keyboard, pc keyboard can work with jc-1260a together. 5.
Jc-1260a rs232 series: the db-9f side of rs232 cable connects to pc com port (com1 or com2 or other coms) , rj45 side connects to jc-1260a. And power connects to dc jack of db-9f connector. 6.
Custom programming tool the jc-1260a series doesn’t need any drivers for pc. For k series (jc-1260ak), it just emulates normal keyboard interface, and sending data just as normal pc keyboard. You can get the card data by using notepad (windows system) or in dos prompt or any words editor. For r seri...
Pic-01 pic-02 8.
Keyboard mode: kb mode scan code delay the range is between is 0~255, default is 1. Set the large value will slow down the speed of kb data sends out, yet it will be more compatible if you are facing the problem with slow pc. Kb mode character code delay the range is between is 0~255, default is 10....
Error beep sound for enable / disable sound when 1260a reads card and error happened. Prefix / suffix enable or disable prefix / suffix for card data when on the check box, you can edit the prefix / suffix, key in up to 7 characters. You can key in data in text field directly, or use mouse click the...
High compatible tk1,tk2,tk3 for enable / disable high compatible mode for reading data from track1/2/3 , to enable the option, the decoder will turn off some digit check for reading card data, it will be more efficient to read bad cards which used for long time and damaged a little bit. Kb data outp...
(track 1 start sentinel is “% “, track 2 / 3 start sentinel is “; “ ) end sentinel enable / disable track end sentinel (the end sentinel is “? “ for all tracks) lrc sentinel enable / disable track lrc sentinel (lrc = first byte data xor second byte data xor third byte data xor ….. Last bye data) tkx...
6. Load main setting from 1260 choose for up loading settings from jc-1260 to pc, this function only can be active by rs232 cable. 7. Detect firmware version choose for detect firmware version of current jc-1260, this function only can be active by rs232 cable. 8. Reset 1260 to factory default choos...
Appendix i specifications decoding capability • single-track: track 1 or track 2 or track 3 • dual-tracks: tracks 1 & 2 or tracks 2 & 3 • triple-tracks: tracks 1 & 2 & 3 card reading speed • 7.5 to 125 cm/sec • bi-directional magnetic head life • 300,000 passes status indicator • audible beep for ea...
Physical • dimensions: 115mm x 46mm x 34mm • weight: 100g environmental • operating temperature: 0 ~ 40℃ • storage temperature: -20 ~ 60℃ • humidity: 10% ~ 90% rh (non-condensing) power requirement • model jc-1260ak: from kb port. • model jc-1260ar: from external power supply. Power consumption • du...
