Jarv BTS300S-BLK User Manual - Getting Started

GETTING STARTED 

To use your Jarv DuraVibe Pro Bluetooth Speaker, please follow 

these steps:

1. Charge your Bluetooth speaker fully 

2. Pair your Bluetooth Speaker to a Bluetooth-enabled device prior 

to use. 

CHARGING YOUR BLUETOOTH SPEAKER

Your Jarv DuraVibe Pro Bluetooth Speaker come with a built-in 

rechargeable battery and a Micro USB charging cable. Charge 

fully before use. The battery indicator will turn red when 

charging and turn green once charging is complete. Initial 

charging time is approximately 3-4 hours.  

PAIRING YOUR BLUETOOTH SPEAKER 

In order to use your Jarv DuraVibe Pro Bluetooth Speaker with a 

Bluetooth-enabled device, you will first need to pair the two. 

1. Place the Bluetooth Speaker and the Bluetooth enabled device 

where they are easily viewable and no more than 3ft. apart. 

2. Turn ON your Bluetooth pairing function on your device

3. Turn the speaker on by pressing down the Power button for 

about 7 seconds. A Blue LED light will start flashing quickly 

indicating that the speaker is now in Pairing Mode.  

4. The speaker will appear as “DuraVibe Pro” when scanning for 

available Bluetooth devices within range. 

5-Once Pairing is successful a chime will be heard through the 

speaker 

5