Jarvis Marine Watersnake FWDR44-42 Owner's Manual

Summary of Watersnake FWDR44-42

  • Page 1

    Owners manual tsb series electric foot control bow mount motor twin shaft model.

  • Page 2: Watersnake Electric Motors

    Watersnake electric motors congratulations and welcome to a world of silent motoring. You wont regret your purchase of this lightweight, jarvis marine watersnake electric motor. Powerful yet silent, the watersnake electric motors are built to suit all angling conditions. High quality materials, supe...

  • Page 3: Folding Down Motor

    Foot pedal control system anti-impact protection and auto - vertical function. Buffer the impact from any direction within 15 degrees rubber material aluminium material pull cord raise motor place horizontally folding down motor motor unit 3 blade power propeller flexible composite lower shaft foldi...

  • Page 4: Set Up

    Set up lower the motor to the required depth, making sure that it locks into the vertical position securely. Depth adjustment hold the motor shaft with one hand, loosen the depth adjustment screw and set the motor to the desired depth. Then retighten the adjusting screw securely. Stowing when the wa...

  • Page 5: Electrical Connections

    Once the locknut is removed, the propeller can be slid off. When putting the propeller back on, verify there is a proper fi t of the groove and shear pin otherwise the propeller will not be locked. (g) after using the motor always check and clear any weed or fi shing line that may have become tangled ...

  • Page 6: Troubleshooting

    Model fwtsb44-42 fwtsb44-48 fwtsb54-48 fwtsb54-54 fwtsb70-48 fwtsb70-54 max thrust 44lbs 44lbs 54lbs 54lbs 70lbs 70lbs control foot foot foot foot foot foot shaft length 42”/105cm 48”/120cm 48”/120cm 54”/135cm 48”/120cm 54”/135cm voltage 12v 12v 12v 12v 24v 24v shaft material composite/alloy composi...

  • Page 7: Maintenance

    2: check to see propeller is secure and not damaged. 3: check shaft to ensure it is not bent. Detach propeller and run motor visually to ensure shaft is not shaking. If shaft is damaged contact your retailer. Loss of speed setting 1: check all wiring connections. 2: speed coil in motor may be burned...

  • Page 8

    3. Limitations on liability limited and excluded liability unless this warranty provides otherwise, the maximum aggregate liability of jarvis walker for all proven losses, damages and claims arising out of this warranty, including liability for breach, in negligence or in tort or for any other commo...