Wireless optical mouse instruction manual ho97990 / 98150 for technical support, contact jasco at 1-800-654-8483 or www.Jascoproducts.Com revision 5.
2 table of contents feature descriptions ------------------------------------------- 3 package contents ------------------------------------------------ 3 system requirements ------------------------------------------- 3 connecting your mouse --------------------------------------- 4 power saving fe...
3 feature descriptions • eliminates the clutter of tangled cords • provides pinpoint precision on most surfaces and won’t wear out • goes to sleep when idle for a long time to extend battery life • battery low led illuminates when the battery is low • compatible with any usb port package contents • ...
4 connecting your mouse 1. Disconnect the existing mouse. 2. Connect the receiver’s usb plug to the usb port on your computer. 3. Place the receiver 8” (20cm) from any other electronic device such as your computer and monitor. 4. Install the included 2 aa batteries into the battery compartment locat...
5 note: optical mice do not work well on glass or highly reflective surfaces. If your mouse does not work properly, try a different surface such as a plain white piece of paper. Power saving features 1. After a period of inactivity, the wireless optical mouse goes into sleep mode to save batteries. ...
6 troubleshooting 1. Linking the mouse ¾ press the link button on the bottom of your receiver with a pen or paper clip. ¾ being careful not to shine the light in your eyes, use a pen or paper clip to press the link button on the bottom of your wireless optical mouse. Move the mouse to ensure connect...
7 mouse does not respond (continued) ¾ make sure you have installed all windows ® updates and patches for your os. Visit www.Microsoft.Com ¾ optical mice do not work well on glass or highly reflective surfaces. Try using your mouse on a different surface such as a plain white piece of paper. ¾ turn ...
8 5 year limited warranty jasco products company warrants this product to be free from manufacturing defects for a period of five years from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or inci...
9 fcc statement notice: federal communications commission (fcc) requirements, part 15 this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful inte...
10 caution: any changes of modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment. This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful inter...
