Jasmine LP-1.0 MM/MC Owner's Manual - page 7
Break-in and warm-up
Careful listeners will notice that the sound of the Jasmine Phono
Pre-Amplifier improves steadily after the unit is powered-up. A
new unit will undergo more dramatic changes when power is
applied for the first time. Depending on the resolution of the
system and the attentiveness of the listener, you may find that
the sound continues to improve over the first several weeks of
operation. If the power is disconnected for a period of an hour
or more, the unit will undergo similar but less dramatic
break-in.
When you connect the signal output cable of your turntable to
the input connector of Jasmine LP1.0 Phono Pre-Amplifier,
Please be sure that the ground spade of the signal cable also be
connected on the G terminal of Jasmine LP1.0 Phono
Pre-Amplifier at same time. Otherwise, Maybe cause
continuous noise coming with music.
The output of Jasmine LP1.0 Phono Pre-Amplifier can be
directly connected to other pre-amplifier and integrated
amplifier. But it can’t be directly connected to any power
amplifier.
Connecting to Turntable
Connecting to Amplifiers