J a s m jasmine lp-3.0mk1 i mm/mc phono pre-amplifier n e p h o owner’s manual n o s t a g e.
- 2 - safety precautions to achieve the best performance from your jasmine lp3.0mk1 mm/mc phono stage, and for your own safety, please read and follow these important safety instructions: never place the jasmine lp3.0mk1 near heat sources such as radiators, fireplaces, stoves, or other appliance...
- 3 - contents safety precautions 2 introduction 4 a brief of jasmine the design philosophy of jasmine audio installation 5 unpacking the accessory kit placing jasmine phono pre‐amplifier connections 6 connecting to ac power connecting to the turntable connecting to the amplifiers operation 8 settin...
- 4 - introduction all of us at jasmine would like to offer thanks and congratulations to you for purchasing the jasmine lp3.0mk1. We sincerely believe that your jasmine lp3.0mk1 is an intelligent purchase decision that will bring you many years of musical pleasure and satisfaction. While every new ...
- 5 - installation this section includes information on how to unpack and position your jasmine lp3.0mk1 phono pre‐amplifier. Unpacking after carefully unpacking your jasmine lp3.0mk1, inspect for any shipping damage and call your dealer immediately if any is found. Do not plug your jasmine lp3.0mk1...
- 6 - connections this section provides instructions to connect the jasmine lp3.0mk1 to the rest of your music system. Below is an illustration of the jasmine lp3.0mk1 rear panel, showing all inputs and outputs. To avoid static shocks to be applied to the inputs or outputs of lp3.0mk1. To prevent st...
- 7 - connecting to ac power check to make sure your jasmine lp3.0mk1 has been settled for operation at your ac voltage type. Attempting to use your jasmine lp3.0mk1 at any voltage other than that specified on the rear of the unit may cause damage that is not covered by jasmine audio’s warranty. Jas...
- 8 - operation this section describes how to operate the jasmine lp3.0mk1 phono pre‐amplifier. Mm or mc mode setting please set the correct running mode according to the phono cartridge type which you are using by the cartridge type switch on the front panel. For some high output mc cartridges, it ...
- 9 - powering on & off sequence the correct power‐on and power‐off sequence will lengthen the life of your hi‐fi system. Power on sequence turntable ‐‐>phono pre‐amp ‐‐> pre‐amplifier ‐‐> power amplifier. turntable ‐‐> phono pre‐amp ‐‐> integrated amplifier. Power off sequence power amplifier...
- 10 - warranty jasmine warrants that jasmine products shall be free from defects in materials and workmanship for: one years for parts and labor the warranty period begins at the date of retail sale by an authorized jasmine dealer and is subject to the following requirements and understandings: 1. ...
- 11 - specifications input channel: 3 sets of rca out channel: 1x rca, 1x xlr gain @1khz: low: rca output： mm=40db, mc=60db xlr output： mm=45db, mc=65db high: rca output： mm=45db, mc=65db xlr output： mm=50db, mc=70db riaa eq distortion: ‐ 0.03 ~ +0.15db ( 20hz to 20khz ) thd: output level : s/n: mm...
